Electronic Air Cleaner AK- 20
How it works
Contaminated air is drawn by the blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 micron, pass into a strong electrical field (Ionizing section -12kV ) where the particulates receive an electrical charge. The charged particles are then drawn into a collecting plate section made up of a series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (collecting section- 6kV) as the particles, which repel, while the interleaving plates are grounded, which attracts and collect the contaminants. An after-filter will then complete the air cleaning process.
Specification Dimension: Cabinet: Finishing: Operating Voltage: Airflow: Airflow Volume: Static Pressure: Controls: Installation: Weight:
Electrostatic Cell Cell Dimension: Ionizing Voltage: Collector Voltage: Ionizing Wire: Collection Plate: Cell Weight:
L: 400mm x D: 375mm x H: 410mm 1.5mm welded galvanised Steel Power coated 220V 50Hz 40W Single Phase Horizontal. Right to left, Left to right 1700 Cmh 80 to 100 Pa Power cut-off when panel door is opened. On-off Switch with indicating light. Drop, wall or frame mounted 17Kg
SIDE
Air & Odor Management Pte Ltd 60 Ubi Crescent # 01-04 Ubi Techpark Singapore 408569
L: 285mm x W: 175mm x H: 320mm 12Kv 6Kv 11 21 4.4Kg
FRONT
65-6286 3333 T
65-6747 7992 F
TOP
[email protected] www.aom.sg