ELM
Catalog Number Notes
FEATURES
INTENDED USE — Provides a minimum of 90 minutes of illumination for the rated wattage upon loss of AC power. Ideal for applications requiring attractive unit equipment with quick installation.
Type
CONSTRUCTION — White, compact, low-profile contemporary design with UV-stabilized thermoplastic housing that is impact and scratch-resistant. Two 5.4W wedge-base krypton lamps offer 32 percent more light output than standard incandescent lamps. Patent-pending reflector/refractor design significantly improves photometrics. Dual-voltage input capability (120/277V).
Thermoplastic Emergency Light
Edge connectors on printed circuit board ensure long-term durability. Universal J-box mounting pattern.
ELM
Low-profile, integrated test switch/pilot light. Tool-less access for maintenance. Easily visible bright red status indicator. Flexible conduit entry provision on top of the unit. Ceiling mount standard. U.S. Patent No. D483,511
LEAD-CALCIUM BATTERY
ELECTRICAL — Current-limiting charger maximizes battery life and minimizes energy consumption. Provides low operating costs. Short-circuit protection — current-limiting charger circuitry protects printed circuit board from shorts.
Specifications
Thermal protection senses circuitry temperature and adjusts charge current to prevent overheating and charger failure.
Length: 11-1/2 (29.2)
Thermal compensation adjusts charger output to provide optimum charge voltage relative to ambient temperature.
Height: 5 (12.7)
Regulated charge voltage maintains constant-charge voltage over a wide range of line voltages. Prevents over/undercharging that shortens battery life and reduces capacity. Filtered charger input minimizes charge voltage ripple and extends battery life. AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from deep discharge.
5 (12.7)
Depth: 3-3/4 (9.5) Weight: ELM -3.3 lbs (1.5 kgs)
ELM CSR - 3.6 lbs (1.6 kgs)
11-1/2 (29.2)
3-3/4 (9.5)
All dimensions are inches (centimeters) unless otherwise specified.
Brownout protection is automatically switched to emergency mode when supply voltage drops below 80 percent of nominal. Battery: Sealed, maintenance-free lead-calcium battery. Automatic 48-hour recharge after a 90-minute discharge. Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery. Single-circuit battery connection.
WARRANTY — 3-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Galvanized battery retaining clip. LISTINGS — UL Listed. Meets UL 924, NFPA 101 (current Life Safety Code), NFPA 70-NEC and OSHA illumination standards. ELM CSR meets UL 1310 and UL73.
ORDERING INFORMATION
Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice.
For shortest lead times, configure product using standard options (shown in bold).
Example: ELM
ELM Family ELM
Options CSR
Six-foot cordset (120V)
Accessories: Order as separate item. ELA VS
Thermoplastic vandal shield1
ELA WG1
Wireguard (13-1/2”H x 15”W x 6”D)2
EMERGENCY
Notes 1 See spec sheet ELA-RTLP-MS-VS2. 2 See spec sheet ELA-WG.
ELM
ELM Quantum® Thermoplastic Emergency Light SPECIFICATIONS
MOUNTING
All dimensions are inches (centimeters). Shipping weight:
ELECTRICAL
ELM:
Primary Circuit Type
Volts 120 277
ELM
3.3 lbs (1.5 kgs)
ELM CSR: 3.6 lbs (1.6 kgs)
Input Amps .11 .12
Watts 1.2 1.5
Output Volts
1/2 hrs.
6
_
Watts Output1 1 hrs. 1-1/2 hrs. _
12
2hrs. 9 11-1/2" (29.2)
BATTERY Sealed Lead Calcium
5" (12.7)
Voltage
Shelf life2
Typical life2
Maintenance3
6
12 months
5 - 7 years
none
Optimum temperature4 60°– 90°F (16°– 32°C)
1 Half-hour and one-hour run time not applicable for U.S. product. 2 At 77°F (25°C). 3 All life safety equipment, including emergency lighting for path of egress, must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service or testing could jeopardize the safety of occupants and will void all warranties. 4 Optimum ambient temperature range where unit will provide capacity for 30 to 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed information.
3-3/4" (95.2)
Mounting Plate 1-7/8” (4.9)
5" 3-7/8" (12.7) (9.9)
5-5/8" (14.3)
LAMP PHOTOMETRICS
2” (6.4)
11/1/2" (29.2)
3-3/4" (9.5)
Consult factory for photometric information.
FIXTURE PERFORMANCE Consult factory for fixture performance information.
KEY FEATURES
OPTION
Unit snaps to mounting plate — no additional mechanical fasteners needed.
ELM CSR option with six-foot cordset.
ELM
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694
Fax: 770-981-8141 www.lithonia.com ©1991-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/26/13
FEATURES
INTENDED USE — Provides a minimum of 90 minutes of illumination for the rated wattage upon loss of AC power. Ideal for applications requiring attractive unit equipment with quick installation.
Type
CONSTRUCTION — White, compact, low-profile contemporary design with UV-stabilized thermoplastic housing that is impact and scratch-resistant. Two 5.4W wedge-base krypton lamps offer 32 percent more light output than standard incandescent lamps. Patent-pending reflector/refractor design significantly improves photometrics. Dual-voltage input capability (120/277V).
Thermoplastic Emergency Light
Edge connectors on printed circuit board ensure long-term durability. Universal J-box mounting pattern.
ELM
Low-profile, integrated test switch/pilot light. Tool-less access for maintenance. Easily visible bright red status indicator. Flexible conduit entry provision on top of the unit. Ceiling mount standard. U.S. Patent No. D483,511
LEAD-CALCIUM BATTERY
ELECTRICAL — Current-limiting charger maximizes battery life and minimizes energy consumption. Provides low operating costs. Short-circuit protection — current-limiting charger circuitry protects printed circuit board from shorts.
Specifications
Thermal protection senses circuitry temperature and adjusts charge current to prevent overheating and charger failure.
Length: 11-1/2 (29.2)
Thermal compensation adjusts charger output to provide optimum charge voltage relative to ambient temperature.
Height: 5 (12.7)
Regulated charge voltage maintains constant-charge voltage over a wide range of line voltages. Prevents over/undercharging that shortens battery life and reduces capacity. Filtered charger input minimizes charge voltage ripple and extends battery life. AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from deep discharge.
5 (12.7)
Depth: 3-3/4 (9.5) Weight: ELM -3.3 lbs (1.5 kgs)
ELM CSR - 3.6 lbs (1.6 kgs)
11-1/2 (29.2)
3-3/4 (9.5)
All dimensions are inches (centimeters) unless otherwise specified.
Brownout protection is automatically switched to emergency mode when supply voltage drops below 80 percent of nominal. Battery: Sealed, maintenance-free lead-calcium battery. Automatic 48-hour recharge after a 90-minute discharge. Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery. Single-circuit battery connection.
WARRANTY — 3-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Galvanized battery retaining clip. LISTINGS — UL Listed. Meets UL 924, NFPA 101 (current Life Safety Code), NFPA 70-NEC and OSHA illumination standards. ELM CSR meets UL 1310 and UL73.
ORDERING INFORMATION
Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice.
For shortest lead times, configure product using standard options (shown in bold).
Example: ELM
ELM Family ELM
Options CSR
Six-foot cordset (120V)
Accessories: Order as separate item. ELA VS
Thermoplastic vandal shield1
ELA WG1
Wireguard (13-1/2”H x 15”W x 6”D)2
EMERGENCY
Notes 1 See spec sheet ELA-RTLP-MS-VS2. 2 See spec sheet ELA-WG.
ELM
ELM Quantum® Thermoplastic Emergency Light SPECIFICATIONS
MOUNTING
All dimensions are inches (centimeters). Shipping weight:
ELECTRICAL
ELM:
Primary Circuit Type
Volts 120 277
ELM
3.3 lbs (1.5 kgs)
ELM CSR: 3.6 lbs (1.6 kgs)
Input Amps .11 .12
Watts 1.2 1.5
Output Volts
1/2 hrs.
6
_
Watts Output1 1 hrs. 1-1/2 hrs. _
12
2hrs. 9 11-1/2" (29.2)
BATTERY Sealed Lead Calcium
5" (12.7)
Voltage
Shelf life2
Typical life2
Maintenance3
6
12 months
5 - 7 years
none
Optimum temperature4 60°– 90°F (16°– 32°C)
1 Half-hour and one-hour run time not applicable for U.S. product. 2 At 77°F (25°C). 3 All life safety equipment, including emergency lighting for path of egress, must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service or testing could jeopardize the safety of occupants and will void all warranties. 4 Optimum ambient temperature range where unit will provide capacity for 30 to 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed information.
3-3/4" (95.2)
Mounting Plate 1-7/8” (4.9)
5" 3-7/8" (12.7) (9.9)
5-5/8" (14.3)
LAMP PHOTOMETRICS
2” (6.4)
11/1/2" (29.2)
3-3/4" (9.5)
Consult factory for photometric information.
FIXTURE PERFORMANCE Consult factory for fixture performance information.
KEY FEATURES
OPTION
Unit snaps to mounting plate — no additional mechanical fasteners needed.
ELM CSR option with six-foot cordset.
ELM
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694
Fax: 770-981-8141 www.lithonia.com ©1991-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/26/13
