ERSS - Round Straight Steel Poles
Specification Grade Area Lighting
Poles
ERSS - Round Straight Steel Poles Ordering Information - ORDERING EXAMPLE: ERSS-16-45-1-AS1-BL-Q18
steel poles
ERSS-16-45-1
AS1
BL
pole cat. #
mounting
FINISH
ErSs-16-45-1 ErSS-20-45-1 erSS-25-50-7
AS(X) BS(X)1 Double at 90 deg CS(X)1 Double at 180 deg
WH White
1
Side-single
Q18 options
BL Black DB Dark Bronze
1
DS(X)
Triple at 90 deg
GR Gray
1
ES(X)
Triple at 120 deg
PS Natural Alum.
1
FS(X)
Quad at 90 deg
CC Custom Color
Q18 15A GFI receptacle and cover
1 Replace (X) with number below to indicate fixture drilling: 1 RT21, RT25, SQ19, SQ25, SQR19, SQR25 2 RT32
pole data Allowable Pole EPA
(steady wind/gusting wind x 1.3)
12"
Pole Cat. No.
Dia.
ERSS-16-45-1 ERSS-20-45-1 ERSS-25-50-7
4.5" 4.5" 5.0"
Base Plate Est. 80/104 90/117 100/130 (sq.) Weight 3/4"x30"x3" 10.25"x.75" 105 10.6 8.2 6.4 3/4"x30"x3" 10.25"x.75" 127 7.0 5.2 4.0 1"x36"x4" 10.25"x1" 260 10.4 8.0 6.2
Wall Thk Gauge Pole Ht. Bolt Circle AB Proj Anchor Bolts 0.119 0.119 0.179
11 11 7
16' 20' 25'
11" 11" 11"
4" 4" 4"
NOTE: Responsibility lies with the specifier for correct pole selection based on local codes and standards for the job location. See pages 658-659 for pole drilling/hand hole orientation.
654
Specification Grade Area Lighting
Poles
Steel Poles
Base The base plate is hot-rolled steel attached by two continuous welds. A two-piece steel base cover is provided with ESSS and ERSS poles. CRTS/ERTS and ESTS use nut covers. Anchor Bolts Each pole is supplied with four galvanized steel anchor bolts, and eight hex nuts and washers. Bolt circle templates are included. Advance shipments of anchor bolts and templates are available upon request.
erss
Wire Access Wireway access is provided via hand holes. Hand holes are 3" x 5" in size for 6.5" diameter round or 6.5" square poles or smaller. All other hand holes are 4" x 6". Hand holes are centered 12" above the base of the pole.
steel poles
steel poles general specifications Pole Shaft The pole shaft is manufactured from a single piece of hot-rolled steel with an invisible single longitudinal weld (on a finished pole). Square pole have four soft radius corners. The rate of taper is 0.11" per foot for square poles and 0.14" per foot for round poles.
A steel hand hole cover is included. Polyester TGIC finish Poles are cleaned with a solvent to remove grease and oil and sandblasted before finished with a standard polyester TGIC coating. Finish is U.V. resistant and capable to withstand continuous exposure to exterior conditions. Standard colors are dark bronze, black, white, gray and natural aluminum. Custom powder and wet finishes are available (contact factory).
crts/erts
esss
39' -0"
ests
40'-0"
40' 35'-0"
35'-0" 35' 30'-0"
30' -0"
30'- 0" 30' 25'-0"
25'-0"
25'-0"
25' -0"
25' 20' -0"
20'-0" 20'
16' - 0"
20'-0"
16' - 0"
20' -0"
16' - 0" 12' - 6"
15' 12' - 0"
10' - 0"
10'
5'
0'
*Standard pole heights per style. Additional sizes may be available, contact factory for details.
653
CURB
LUMINAIRE
ARM LUMINAIRE (10) LUMINAIRE SINGLE (28) STREET 2 @ 180° BASE CURB HAND HOLE STREET POLEARM CURB HANDHOLE HINGE PIN TOP VIEW (29) ARM POLE ANCHORBASE BASE - 2 @ 90° LUMINAIRE HAND 10 HOLE POLE BASE TOP VIEW (10) LUMINAIRE HINGE BASE - SINGLE LUMINAIRE (39) 28 3 @ 90° STREET
(10) Specification Grade Area Lighting
Poles
SINGLE
STREET
CURB ARM HAND HOLE POLE
PoleBASEDrilling / Hand Hole Orientation TOP VIEW (10) ANCHOR BASE - SINGLE LUMINAIRE
LUMINAIRE
10 mounting configuration ASX (28)
2 @ 180°
LUMINAIRE
mountingCURB configuration BSX (28) ARM 292 @ 180° TOP VIEW (28) ANCHOR BASE - 2 @ 180° LUMINAIRE
poles
STREET
STREET Anchor base - 2 @ 90˚ Luminaire CURB 39 BASE
Anchor base - Single Luminaire 28 CURB ARM LUMINAIRE HAND(10) HOLE POLE SINGLE 29
BASE STREET
CURB
39
ARM HAND HOLE POLE
BASE TOP VIEW (28) ANCHOR BASE - 2 @ 180° LUMINAIRE TOP VIEW (10) 49 ANCHOR BASE - SINGLE LUMINAIRE 10
LUMINAIRE (29) 2LUMINAIRE @ 2890° (28) 2 @ 180°
STREET CURB STREET
ARM
29CURB
ARM
HAND HOLE BASEconfiguration mounting HANDDSX HOLE 39 POLE POLE
BASE
TOP VIEW (29)
ANCHOR BASE - 2-@3 90° LUMINAIRE Anchor base @ 90˚ Luminaire 49 LUMINAIRE (39) TOP VIEW (28) 3 @ 90° ANCHOR BASE - 2 @ 180° LUMINAIRE STREET CURB
ARMLUMINAIRE (29) 2 @ 90°
STREET BASE CURB
HAND ARM HOLE POLE
BASE
HAND HOLE TOP VIEW (39) POLE ANCHOR BASE - 3 @ 90° LUMINAIRE TOP VIEW (29) ANCHOR BASE - 2 @ 90° LUMINAIRE LUMINAIRE LUMINAIRE (49) 4(39) @ 90° 3 @ 90°
STREET STREET CURB
ARM ARM
CURB
BASE BASE
HAND HOLE POLE HAND HOLE POLE
HAND LUMINAIRE LUMINAIRE ARMHOLE POLE (29) HAND(10) HOLE SINGLE 2POLE @ 90°
HINGE PIN STREET BASE STREET
49 CURB
CURB TOP VIEW (39) ARM ARM HANDHOLE ANCHOR BASE - 3 @ 90° LUMINAIRE HINGE PIN POLE BASE TOP VIEW (28) BASE HAND HOLE LUMINAIRE HINGE BASE - 2 @ 180° LUMINAIRE TOP VIEW POLE (10) (49) 10 HINGE BASE - SINGLE LUMINAIRE 4 @ 90° STREET TOP VIEW (29) ANCHOR BASE - 2 @ 90° LUMINAIRELUMINAIRE (29) CURB ARM 28 2LUMINAIRE @ 90° STREET (28) LUMINAIRE (39) 2 @ 180° CURB 3ARM @ 90° STREETSTREET 29CURB BASE HAND HOLE HINGE PIN POLE CURB ARM ARM HINGE PIN HAND HOLE mountingBASE configuration ESX HAND 32 HOLE POLE P BASE POLE BASE TOPTOP VIEW (29) VIEW (49) HAND HOLE HINGE BASE -90° 2 120˚ @LUMINAIRE 90°Luminaire LUMINAIRE ANCHOR BASEW/ --4HH Anchor base 3@@ POLE
P
39
LUMINAIRE (32) 3LUMINAIRE @ 120° (49) 4 @ 90°
STREET STREET CURB CURB
ARM ARMHOLE HAND
ARM LUMINAIRE (10) ARM LUMINAIRE SINGLE HAND HOLE HINGE PIN (28) POLE STREET BASE BASE 2 @ 180° CURB HAND HOLE STREET POLE LUMINAIRE CURB ARM TOP VIEW (29)(10) HINGE PIN ARM SINGLE POLE HINGEPIN BASE W/ HH - 2 @ 90° LUMINAIRE HINGE BASE HAND HOLE STREET POLE TOP VIEW (28) CURB BASE TOP VIEW (10) ANCHOR BASE - 2 @ 180° LUMINAIRE LUMINAIRE HINGE BASE - SINGLE 10 LUMINAIRE (39) ARM HAND HOLE3 @ 90° STREET POLELUMINAIRE LUMINAIRE BASE (29) mounting configuration CSX 28 CURB (28) ARM 2 @ 90° TOP VIEW (10) (28) STREET 2 @ 180° TOP VIEW ANCHOR BASE SINGLE LUMINAIRE BASE - 2 @ 180° LUMINAIRE HINGE STREET PIN Anchor base - 2 @ 180˚ Luminaire CURB CURB ARM 29 BASE P HAND HOLE LUMINAIRE LUMINAIRE ARM LUMINAIRE POLE (28) (10) (29) HINGE PIN 2 @ 180° SINGLE @ 90° 392 POLE BASE STREET BASE HAND HOLE STREET STREET POLE CURB CURB CURB TOP VIEW TOP(29) VIEW (39) ARM ARM ARM ANCHOR BASE - 2W/ @HH 90°- 3 LUMINAIRE HINGE BASE @ 90° LUMINAIRE 10HINGE PIN HAND 49 HOLE HINGE PIN POLE POLE BASE BASE BASE TOP VIEW LUMINAIRE (28) HAND HOLE LUMINAIRE (39)LUMINAIRE HINGE BASE - 2 @ 180° TOP VIEW POLE (10)28 (49) 3 @ 90° HINGE BASE SINGLE LUMINAIRE STREET 4 @ 90° STREET TOP VIEW (29) LUMINAIRE HINGE BASE W/ HH - 2 @ 90° LUMINAIRE CURB CURB (29) ARM 29 ARM TOP VIEW (28) 2LUMINAIRE @ 90° STREET (28) LUMINAIRE ANCHOR BASE - 2 @ 180° LUMINAIRE (39) 2 @ 180° CURB 3ARM @ 90° 39 BASE STREETSTREET HAND HOLE CURB LUMINAIRE HAND HOLE HINGE PIN POLE (29) HINGE POLE BASE CURB PIN ARM 2ARM @ 90° STREET BASE mounting configuration FSX HINGE PIN POLE HINGE PIN BASE 49 POLE CURB ARM TOP VIEW (39) H BASE TOP VIEW VIEW (49)(29) ANCHOR BASE - 3 TOP @ 90° LUMINAIRE HAND HOLE HINGEW/ 2 90° LUMINAIRE HINGEbase BASE 4 @ Luminaire Anchor -BASE 4HH @- 90˚ POLE
TOP VIEW (49) HINGE BASE W/TOP HHVIEW - 4 @(39) 90° LUMINAIRE HINGE BASE W/ HH - 3 @ 90° LUMINAIRE LUMINAIRE (32) 3LUMINAIRE @ 120° TOP VIEW (32) ANCHORSTREET BASE - 3 @ 120° LUMINAIRE(49) 4 @ 90° STREET
LUMINAIRE (32) 3LUMINAIRE @ 120° TOP VIEW TOP VIEW (49) (32) (49) STREET HINGE BASE W/ -3@ 120° LUMINAIRE ANCHOR BASE - 4 HH @ 90° LUMINAIRE 4 @ 90° STREET
CURBCURB HINGE PIN STREET STREET BASE CURB
49LUMINAIRE
ARMARM (29) LUMINAIRE HAND HOLE 2 @ 90° (49) 4 @ 90° HAND HOLE ARM POLE ARM
CURB HINGE PIN BASE POLE BASE HAND HOLE TOPTOP VIEW (32) VIEW (39) POLE ANCHOR BASEW/ - 3HH @ -120° BASE BASE HINGE 3 @ LUMINAIRE 90° LUMINAIRE HAND HOLE TOP VIEW (29) POLE HINGE BASE W/ HH - 2 @ 90° LUMINAIRE
LUMINAIRE LUMINAIRE (49) 4(39) @ 90° TOP VIEW (49) STREET ANCHORSTREET BASE - 4 @ 90° LUMINAIRE 3 @ 90° CURB ARM CURB LUMINAIRE ARM (32) 3 @ 120° HINGE PIN STREET HAND HOLE HINGE PIN BASE POLE BASE HAND HOLE CURB ARM POLE
BASE
POLE
CURB CURB HAND HOLE
BASE
658
BASE
HAND HOLE POLE POLE
CURB CURB
ARM ARM HINGE PIN
TOP VIEW (32)
HAND HOLE POLE POLE
HINGE PIN BASE BASE TOP VIEW (32)
H HA
HI
P
HIN HING
HIH
P
HING HI
HIN
HING
HI
HING
HIN
HAN
HING HING
POLE
STREET BASE
HIN
BASE
HANDLUMINAIRE HOLELUMINAIRE LUMINAIRE POLE(49) TOP VIEW (28) (32)(39) @ 90° 3 @3 120° 4 @ 90° HINGE - 2(39) @ 180° LUMINAIRE VIEW (29) STREET TOP TOPBASE VIEW STREET STREET ANCHOR 2@ LUMINAIRE HINGE BASE BASE -W/ HH90° -3@ 90° LUMINAIRE CURB CURB ARM ARM LUMINAIRE CURB ARM LUMINAIRE (29) LUMINAIRE (39) 2 @ 90° HANDHINGE HOLE HINGE PIN PIN STREET 3 @ (49) 90° STREET 4 @ 90° BASESTREET BASE HAND HOLE CURB POLE ARM POLE CURB ARM CURB ARM HINGE PIN BASE POLE BASE BASETOP VIEW TOP(49) VIEW (32)(39) POLE TOP VIEW HAND HOLE HINGE BASE W/@ HH -- 33LUMINAIRE @ 120° LUMINAIRE HOLE ANCHOR BASE -4 90° HINGE PIN HINGE BASE @POLE 90°HAND LUMINAIRE TOP VIEW (29) POLE BASE HINGE BASE - 2 @ 90° LUMINAIRE LUMINAIRE LUMINAIRE (32) LUMINAIRE 3 @ 120° (49) TOP VIEW (39) 4(39) @ 90° STREET BASE (49) STREET ANCHOR - TOP 3 @VIEW 90° LUMINAIRE 3 @ 90° HINGE BASESTREET W/ HH - 4 @ 90° LUMINAIRE CURB CURB ARM ARM CURB HANDLUMINAIRE LUMINAIRE ARM HOLE (49) (32) 4 @ 390° @ 120° STREET HINGE PIN STREET HINGE PIN POLE CURB BASE BASE ARM CURB ARM POLE BASE POLE HAND HOLE HINGE PIN TOP VIEW (32) ANCHOR LUMINAIRE TOP VIEW (49)HOLE BASEBASE - 3 @ 120° HAND HINGE BASETOP - 4VIEW @POLE 90° LUMINAIRE (39) HINGE BASE - 3 @ 90° LUMINAIRE
LUMINAIRE LUMINAIRE (39) TOP VIEW (28) (32) 3 120° @ 90° 3@ HINGE BASE - 2(39) @ 180° LUMINAIRE TOP VIEW STREET STREET ANCHOR BASE - 3 @ 90° LUMINAIRE
HAND HOLE TOP VIEW (49) ANCHOR BASE @ 90° TOP- 4 VIEW (39)LUMINAIRE ANCHOR BASE - 3 @ 90° LUMINAIRE
CURB
CURB HINGE PIN BASE BASE
HIN
ARM LUMINAIRE ARM PIN (32) HINGE 3 @ 120°
ARM POLE HAND HOLEPOLE
TOP VIEW (32)
HAN
Specification Grade Area Lighting
Poles
Pole Options and Anchor Bolts Anchor Bolt Detail Base Diagram square straight and tapered poles
Option Orientation
Follow the logic below when ordering location specific options.
round straight and tapered poles (erts, erss) (crts) anchor bolt location in relation to shaft rotation
hand hole
For each option, include its orientation (in degrees) and its height (in feet). Example: Option Q18 should be ordered as: ESSS-20-40-1-AS1-DB-Q18-0-15 (15A GFI receptacle and cover on the hand hole/arm side of pole, 15 feet up from the pole base)
poles
anchor bolt location in relation to shaft rotation hand hole anchor rod hex nut
180°
plain w asher Base plate Bolt projection
grout finish grade plain w asher hex nut grout after pole is set and plumbed
90°
0°
engineering of footing by others
foundation level
270°
Height of option (in feet)
Hand hole at 0˚ orientation
Bolt square Bolt circle
Pole Base Covers Catalog Number SBC-4-XX SBC-4L-XX SBC-5-XX
Standard Anchor Bolts (Included with pole purchase) TAB-17-M38 TAB-30-M38 TAB-36-M38 TAB-42-M38
3/4 x 17 x 3" (galvanized) qty: 3 3/4 x 30 x 3" (galvanized) qty: 4 1 x 36 x 4" (galvanized) qty: 4 1 1/4 x 42 x 6" (galvanized) qty: 4
Replacement Nut/Washer Kit 80033249902 80033259902 80036599903
Note
3/4" TAB30 set 1" TAB36 set 1 1/4" TAB42 set
SBC-45R-XX SBC-5R-XX RBC-45R-XX RBC-45RL-XX RBC-5R-XX RBC-5RL-XX RTS-2570-XX -Q45 RTS-3080-XX -Q45 RTS-3585-XX -Q45 RTS-3990-XX -Q45
Description Pole Base Covers for Square Poles 10 1/2" Sq x 5" Deep (use on 4" sq poles) 12 1/4" Sq x 5" Deep (use 4" sq poles) 12 1/4" Sq x 5" Deep (use on 5" sq poles) Pole Base Covers for Round Poles 10 1/2" Sq x 5" Deep (use on 4 1/2" round poles) 10 1/2" Sq x 5" Deep (use on 5" round poles) 10.91" Dia. x 5" Deep (use on 4 1/2" round poles) 14.35" Dia. x 5" Deep (use on 4 1/2" round poles) 11.91" Dia. x 5" Deep (use on 5" round poles) 14.35" Dia. x 5" Deep (use on 5" round poles) 13" Sq x 5" Deep (use on 7" round poles) 13" Sq x 5" Deep (use on 8" round poles) 13" Sq x 5" Deep (use on 8 1/2" round poles) 13" Sq x 5" Deep (use on 9" round poles)
Fabricated from high tensile steel, each anchor bolt has two nuts and two washers. Galvanized anchor bolts are hot dipped. (Galvanizing includes threaded portion plus six inches minimum.) Anchor bolt template included with pole purchase.
659
Poles
ERSS - Round Straight Steel Poles Ordering Information - ORDERING EXAMPLE: ERSS-16-45-1-AS1-BL-Q18
steel poles
ERSS-16-45-1
AS1
BL
pole cat. #
mounting
FINISH
ErSs-16-45-1 ErSS-20-45-1 erSS-25-50-7
AS(X) BS(X)1 Double at 90 deg CS(X)1 Double at 180 deg
WH White
1
Side-single
Q18 options
BL Black DB Dark Bronze
1
DS(X)
Triple at 90 deg
GR Gray
1
ES(X)
Triple at 120 deg
PS Natural Alum.
1
FS(X)
Quad at 90 deg
CC Custom Color
Q18 15A GFI receptacle and cover
1 Replace (X) with number below to indicate fixture drilling: 1 RT21, RT25, SQ19, SQ25, SQR19, SQR25 2 RT32
pole data Allowable Pole EPA
(steady wind/gusting wind x 1.3)
12"
Pole Cat. No.
Dia.
ERSS-16-45-1 ERSS-20-45-1 ERSS-25-50-7
4.5" 4.5" 5.0"
Base Plate Est. 80/104 90/117 100/130 (sq.) Weight 3/4"x30"x3" 10.25"x.75" 105 10.6 8.2 6.4 3/4"x30"x3" 10.25"x.75" 127 7.0 5.2 4.0 1"x36"x4" 10.25"x1" 260 10.4 8.0 6.2
Wall Thk Gauge Pole Ht. Bolt Circle AB Proj Anchor Bolts 0.119 0.119 0.179
11 11 7
16' 20' 25'
11" 11" 11"
4" 4" 4"
NOTE: Responsibility lies with the specifier for correct pole selection based on local codes and standards for the job location. See pages 658-659 for pole drilling/hand hole orientation.
654
Specification Grade Area Lighting
Poles
Steel Poles
Base The base plate is hot-rolled steel attached by two continuous welds. A two-piece steel base cover is provided with ESSS and ERSS poles. CRTS/ERTS and ESTS use nut covers. Anchor Bolts Each pole is supplied with four galvanized steel anchor bolts, and eight hex nuts and washers. Bolt circle templates are included. Advance shipments of anchor bolts and templates are available upon request.
erss
Wire Access Wireway access is provided via hand holes. Hand holes are 3" x 5" in size for 6.5" diameter round or 6.5" square poles or smaller. All other hand holes are 4" x 6". Hand holes are centered 12" above the base of the pole.
steel poles
steel poles general specifications Pole Shaft The pole shaft is manufactured from a single piece of hot-rolled steel with an invisible single longitudinal weld (on a finished pole). Square pole have four soft radius corners. The rate of taper is 0.11" per foot for square poles and 0.14" per foot for round poles.
A steel hand hole cover is included. Polyester TGIC finish Poles are cleaned with a solvent to remove grease and oil and sandblasted before finished with a standard polyester TGIC coating. Finish is U.V. resistant and capable to withstand continuous exposure to exterior conditions. Standard colors are dark bronze, black, white, gray and natural aluminum. Custom powder and wet finishes are available (contact factory).
crts/erts
esss
39' -0"
ests
40'-0"
40' 35'-0"
35'-0" 35' 30'-0"
30' -0"
30'- 0" 30' 25'-0"
25'-0"
25'-0"
25' -0"
25' 20' -0"
20'-0" 20'
16' - 0"
20'-0"
16' - 0"
20' -0"
16' - 0" 12' - 6"
15' 12' - 0"
10' - 0"
10'
5'
0'
*Standard pole heights per style. Additional sizes may be available, contact factory for details.
653
CURB
LUMINAIRE
ARM LUMINAIRE (10) LUMINAIRE SINGLE (28) STREET 2 @ 180° BASE CURB HAND HOLE STREET POLEARM CURB HANDHOLE HINGE PIN TOP VIEW (29) ARM POLE ANCHORBASE BASE - 2 @ 90° LUMINAIRE HAND 10 HOLE POLE BASE TOP VIEW (10) LUMINAIRE HINGE BASE - SINGLE LUMINAIRE (39) 28 3 @ 90° STREET
(10) Specification Grade Area Lighting
Poles
SINGLE
STREET
CURB ARM HAND HOLE POLE
PoleBASEDrilling / Hand Hole Orientation TOP VIEW (10) ANCHOR BASE - SINGLE LUMINAIRE
LUMINAIRE
10 mounting configuration ASX (28)
2 @ 180°
LUMINAIRE
mountingCURB configuration BSX (28) ARM 292 @ 180° TOP VIEW (28) ANCHOR BASE - 2 @ 180° LUMINAIRE
poles
STREET
STREET Anchor base - 2 @ 90˚ Luminaire CURB 39 BASE
Anchor base - Single Luminaire 28 CURB ARM LUMINAIRE HAND(10) HOLE POLE SINGLE 29
BASE STREET
CURB
39
ARM HAND HOLE POLE
BASE TOP VIEW (28) ANCHOR BASE - 2 @ 180° LUMINAIRE TOP VIEW (10) 49 ANCHOR BASE - SINGLE LUMINAIRE 10
LUMINAIRE (29) 2LUMINAIRE @ 2890° (28) 2 @ 180°
STREET CURB STREET
ARM
29CURB
ARM
HAND HOLE BASEconfiguration mounting HANDDSX HOLE 39 POLE POLE
BASE
TOP VIEW (29)
ANCHOR BASE - 2-@3 90° LUMINAIRE Anchor base @ 90˚ Luminaire 49 LUMINAIRE (39) TOP VIEW (28) 3 @ 90° ANCHOR BASE - 2 @ 180° LUMINAIRE STREET CURB
ARMLUMINAIRE (29) 2 @ 90°
STREET BASE CURB
HAND ARM HOLE POLE
BASE
HAND HOLE TOP VIEW (39) POLE ANCHOR BASE - 3 @ 90° LUMINAIRE TOP VIEW (29) ANCHOR BASE - 2 @ 90° LUMINAIRE LUMINAIRE LUMINAIRE (49) 4(39) @ 90° 3 @ 90°
STREET STREET CURB
ARM ARM
CURB
BASE BASE
HAND HOLE POLE HAND HOLE POLE
HAND LUMINAIRE LUMINAIRE ARMHOLE POLE (29) HAND(10) HOLE SINGLE 2POLE @ 90°
HINGE PIN STREET BASE STREET
49 CURB
CURB TOP VIEW (39) ARM ARM HANDHOLE ANCHOR BASE - 3 @ 90° LUMINAIRE HINGE PIN POLE BASE TOP VIEW (28) BASE HAND HOLE LUMINAIRE HINGE BASE - 2 @ 180° LUMINAIRE TOP VIEW POLE (10) (49) 10 HINGE BASE - SINGLE LUMINAIRE 4 @ 90° STREET TOP VIEW (29) ANCHOR BASE - 2 @ 90° LUMINAIRELUMINAIRE (29) CURB ARM 28 2LUMINAIRE @ 90° STREET (28) LUMINAIRE (39) 2 @ 180° CURB 3ARM @ 90° STREETSTREET 29CURB BASE HAND HOLE HINGE PIN POLE CURB ARM ARM HINGE PIN HAND HOLE mountingBASE configuration ESX HAND 32 HOLE POLE P BASE POLE BASE TOPTOP VIEW (29) VIEW (49) HAND HOLE HINGE BASE -90° 2 120˚ @LUMINAIRE 90°Luminaire LUMINAIRE ANCHOR BASEW/ --4HH Anchor base 3@@ POLE
P
39
LUMINAIRE (32) 3LUMINAIRE @ 120° (49) 4 @ 90°
STREET STREET CURB CURB
ARM ARMHOLE HAND
ARM LUMINAIRE (10) ARM LUMINAIRE SINGLE HAND HOLE HINGE PIN (28) POLE STREET BASE BASE 2 @ 180° CURB HAND HOLE STREET POLE LUMINAIRE CURB ARM TOP VIEW (29)(10) HINGE PIN ARM SINGLE POLE HINGEPIN BASE W/ HH - 2 @ 90° LUMINAIRE HINGE BASE HAND HOLE STREET POLE TOP VIEW (28) CURB BASE TOP VIEW (10) ANCHOR BASE - 2 @ 180° LUMINAIRE LUMINAIRE HINGE BASE - SINGLE 10 LUMINAIRE (39) ARM HAND HOLE3 @ 90° STREET POLELUMINAIRE LUMINAIRE BASE (29) mounting configuration CSX 28 CURB (28) ARM 2 @ 90° TOP VIEW (10) (28) STREET 2 @ 180° TOP VIEW ANCHOR BASE SINGLE LUMINAIRE BASE - 2 @ 180° LUMINAIRE HINGE STREET PIN Anchor base - 2 @ 180˚ Luminaire CURB CURB ARM 29 BASE P HAND HOLE LUMINAIRE LUMINAIRE ARM LUMINAIRE POLE (28) (10) (29) HINGE PIN 2 @ 180° SINGLE @ 90° 392 POLE BASE STREET BASE HAND HOLE STREET STREET POLE CURB CURB CURB TOP VIEW TOP(29) VIEW (39) ARM ARM ARM ANCHOR BASE - 2W/ @HH 90°- 3 LUMINAIRE HINGE BASE @ 90° LUMINAIRE 10HINGE PIN HAND 49 HOLE HINGE PIN POLE POLE BASE BASE BASE TOP VIEW LUMINAIRE (28) HAND HOLE LUMINAIRE (39)LUMINAIRE HINGE BASE - 2 @ 180° TOP VIEW POLE (10)28 (49) 3 @ 90° HINGE BASE SINGLE LUMINAIRE STREET 4 @ 90° STREET TOP VIEW (29) LUMINAIRE HINGE BASE W/ HH - 2 @ 90° LUMINAIRE CURB CURB (29) ARM 29 ARM TOP VIEW (28) 2LUMINAIRE @ 90° STREET (28) LUMINAIRE ANCHOR BASE - 2 @ 180° LUMINAIRE (39) 2 @ 180° CURB 3ARM @ 90° 39 BASE STREETSTREET HAND HOLE CURB LUMINAIRE HAND HOLE HINGE PIN POLE (29) HINGE POLE BASE CURB PIN ARM 2ARM @ 90° STREET BASE mounting configuration FSX HINGE PIN POLE HINGE PIN BASE 49 POLE CURB ARM TOP VIEW (39) H BASE TOP VIEW VIEW (49)(29) ANCHOR BASE - 3 TOP @ 90° LUMINAIRE HAND HOLE HINGEW/ 2 90° LUMINAIRE HINGEbase BASE 4 @ Luminaire Anchor -BASE 4HH @- 90˚ POLE
TOP VIEW (49) HINGE BASE W/TOP HHVIEW - 4 @(39) 90° LUMINAIRE HINGE BASE W/ HH - 3 @ 90° LUMINAIRE LUMINAIRE (32) 3LUMINAIRE @ 120° TOP VIEW (32) ANCHORSTREET BASE - 3 @ 120° LUMINAIRE(49) 4 @ 90° STREET
LUMINAIRE (32) 3LUMINAIRE @ 120° TOP VIEW TOP VIEW (49) (32) (49) STREET HINGE BASE W/ -3@ 120° LUMINAIRE ANCHOR BASE - 4 HH @ 90° LUMINAIRE 4 @ 90° STREET
CURBCURB HINGE PIN STREET STREET BASE CURB
49LUMINAIRE
ARMARM (29) LUMINAIRE HAND HOLE 2 @ 90° (49) 4 @ 90° HAND HOLE ARM POLE ARM
CURB HINGE PIN BASE POLE BASE HAND HOLE TOPTOP VIEW (32) VIEW (39) POLE ANCHOR BASEW/ - 3HH @ -120° BASE BASE HINGE 3 @ LUMINAIRE 90° LUMINAIRE HAND HOLE TOP VIEW (29) POLE HINGE BASE W/ HH - 2 @ 90° LUMINAIRE
LUMINAIRE LUMINAIRE (49) 4(39) @ 90° TOP VIEW (49) STREET ANCHORSTREET BASE - 4 @ 90° LUMINAIRE 3 @ 90° CURB ARM CURB LUMINAIRE ARM (32) 3 @ 120° HINGE PIN STREET HAND HOLE HINGE PIN BASE POLE BASE HAND HOLE CURB ARM POLE
BASE
POLE
CURB CURB HAND HOLE
BASE
658
BASE
HAND HOLE POLE POLE
CURB CURB
ARM ARM HINGE PIN
TOP VIEW (32)
HAND HOLE POLE POLE
HINGE PIN BASE BASE TOP VIEW (32)
H HA
HI
P
HIN HING
HIH
P
HING HI
HIN
HING
HI
HING
HIN
HAN
HING HING
POLE
STREET BASE
HIN
BASE
HANDLUMINAIRE HOLELUMINAIRE LUMINAIRE POLE(49) TOP VIEW (28) (32)(39) @ 90° 3 @3 120° 4 @ 90° HINGE - 2(39) @ 180° LUMINAIRE VIEW (29) STREET TOP TOPBASE VIEW STREET STREET ANCHOR 2@ LUMINAIRE HINGE BASE BASE -W/ HH90° -3@ 90° LUMINAIRE CURB CURB ARM ARM LUMINAIRE CURB ARM LUMINAIRE (29) LUMINAIRE (39) 2 @ 90° HANDHINGE HOLE HINGE PIN PIN STREET 3 @ (49) 90° STREET 4 @ 90° BASESTREET BASE HAND HOLE CURB POLE ARM POLE CURB ARM CURB ARM HINGE PIN BASE POLE BASE BASETOP VIEW TOP(49) VIEW (32)(39) POLE TOP VIEW HAND HOLE HINGE BASE W/@ HH -- 33LUMINAIRE @ 120° LUMINAIRE HOLE ANCHOR BASE -4 90° HINGE PIN HINGE BASE @POLE 90°HAND LUMINAIRE TOP VIEW (29) POLE BASE HINGE BASE - 2 @ 90° LUMINAIRE LUMINAIRE LUMINAIRE (32) LUMINAIRE 3 @ 120° (49) TOP VIEW (39) 4(39) @ 90° STREET BASE (49) STREET ANCHOR - TOP 3 @VIEW 90° LUMINAIRE 3 @ 90° HINGE BASESTREET W/ HH - 4 @ 90° LUMINAIRE CURB CURB ARM ARM CURB HANDLUMINAIRE LUMINAIRE ARM HOLE (49) (32) 4 @ 390° @ 120° STREET HINGE PIN STREET HINGE PIN POLE CURB BASE BASE ARM CURB ARM POLE BASE POLE HAND HOLE HINGE PIN TOP VIEW (32) ANCHOR LUMINAIRE TOP VIEW (49)HOLE BASEBASE - 3 @ 120° HAND HINGE BASETOP - 4VIEW @POLE 90° LUMINAIRE (39) HINGE BASE - 3 @ 90° LUMINAIRE
LUMINAIRE LUMINAIRE (39) TOP VIEW (28) (32) 3 120° @ 90° 3@ HINGE BASE - 2(39) @ 180° LUMINAIRE TOP VIEW STREET STREET ANCHOR BASE - 3 @ 90° LUMINAIRE
HAND HOLE TOP VIEW (49) ANCHOR BASE @ 90° TOP- 4 VIEW (39)LUMINAIRE ANCHOR BASE - 3 @ 90° LUMINAIRE
CURB
CURB HINGE PIN BASE BASE
HIN
ARM LUMINAIRE ARM PIN (32) HINGE 3 @ 120°
ARM POLE HAND HOLEPOLE
TOP VIEW (32)
HAN
Specification Grade Area Lighting
Poles
Pole Options and Anchor Bolts Anchor Bolt Detail Base Diagram square straight and tapered poles
Option Orientation
Follow the logic below when ordering location specific options.
round straight and tapered poles (erts, erss) (crts) anchor bolt location in relation to shaft rotation
hand hole
For each option, include its orientation (in degrees) and its height (in feet). Example: Option Q18 should be ordered as: ESSS-20-40-1-AS1-DB-Q18-0-15 (15A GFI receptacle and cover on the hand hole/arm side of pole, 15 feet up from the pole base)
poles
anchor bolt location in relation to shaft rotation hand hole anchor rod hex nut
180°
plain w asher Base plate Bolt projection
grout finish grade plain w asher hex nut grout after pole is set and plumbed
90°
0°
engineering of footing by others
foundation level
270°
Height of option (in feet)
Hand hole at 0˚ orientation
Bolt square Bolt circle
Pole Base Covers Catalog Number SBC-4-XX SBC-4L-XX SBC-5-XX
Standard Anchor Bolts (Included with pole purchase) TAB-17-M38 TAB-30-M38 TAB-36-M38 TAB-42-M38
3/4 x 17 x 3" (galvanized) qty: 3 3/4 x 30 x 3" (galvanized) qty: 4 1 x 36 x 4" (galvanized) qty: 4 1 1/4 x 42 x 6" (galvanized) qty: 4
Replacement Nut/Washer Kit 80033249902 80033259902 80036599903
Note
3/4" TAB30 set 1" TAB36 set 1 1/4" TAB42 set
SBC-45R-XX SBC-5R-XX RBC-45R-XX RBC-45RL-XX RBC-5R-XX RBC-5RL-XX RTS-2570-XX -Q45 RTS-3080-XX -Q45 RTS-3585-XX -Q45 RTS-3990-XX -Q45
Description Pole Base Covers for Square Poles 10 1/2" Sq x 5" Deep (use on 4" sq poles) 12 1/4" Sq x 5" Deep (use 4" sq poles) 12 1/4" Sq x 5" Deep (use on 5" sq poles) Pole Base Covers for Round Poles 10 1/2" Sq x 5" Deep (use on 4 1/2" round poles) 10 1/2" Sq x 5" Deep (use on 5" round poles) 10.91" Dia. x 5" Deep (use on 4 1/2" round poles) 14.35" Dia. x 5" Deep (use on 4 1/2" round poles) 11.91" Dia. x 5" Deep (use on 5" round poles) 14.35" Dia. x 5" Deep (use on 5" round poles) 13" Sq x 5" Deep (use on 7" round poles) 13" Sq x 5" Deep (use on 8" round poles) 13" Sq x 5" Deep (use on 8 1/2" round poles) 13" Sq x 5" Deep (use on 9" round poles)
Fabricated from high tensile steel, each anchor bolt has two nuts and two washers. Galvanized anchor bolts are hot dipped. (Galvanizing includes threaded portion plus six inches minimum.) Anchor bolt template included with pole purchase.
659
