F3 CO 05 S
T G H T, G H IN LI G T EI IT W T F ME R O TI SH
F3 CO 05 S
COLUMN TAIL-LIFT FOR VERY NARROW BODY load capacity:
500 kg 1000 kg available
not available yet
APPLICATIONS F3 CO 05 S - This lift has been designed for utility and light commercial vehicles with flatbed or dropsided bodywork. With a lifting capacity of 500kgs, the lift provides a facility to load the rear of the vehicle over the lowered platform without having to unfold the platform, reducing the possibility of damaging the platform. It also has a much reduced drag effect on dropsided vehicles when travelling, due to the folded platform, and gives the vehicle better fuel economy than with a full depth platform.
FEATURES - Columns, platform and lift beam made entirely in aluminium giving very light overall weights as low as 110kgs. - The lift can be made to fit bodies as narrow as 1460mm with 800mm floor height. - Power pack mounted in the lift beam. - Quick and easy to fit using special angle brackets. - Simple 2 button control and isolator with optional wander lead.
COLUMN TAIL LIFTS
- Very low maintenance costs. - Light and easy to operate with torsion assisted platform closure.
The lift provides a facility to load the rear of the vehicle
- Aluminium platform supplied standard or folded (on demand).
TECHNICAL DATA
640
640
width over columns (W) 1460 min.
E 640
540
W (min)
E (max)
1460
800
1510
900
1560
1000
1610
1100
1640
1160
* Width over columns minimum 1460 mm (on demand) Centre of gravity of the vehicle depending on the platform depth and the type of the installations on the vehicle (see assembly instructions).The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
37
F3 CO 05 S
COLUMN TAIL-LIFT FOR VERY NARROW BODY load capacity:
500 kg 1000 kg available
not available yet
APPLICATIONS F3 CO 05 S - This lift has been designed for utility and light commercial vehicles with flatbed or dropsided bodywork. With a lifting capacity of 500kgs, the lift provides a facility to load the rear of the vehicle over the lowered platform without having to unfold the platform, reducing the possibility of damaging the platform. It also has a much reduced drag effect on dropsided vehicles when travelling, due to the folded platform, and gives the vehicle better fuel economy than with a full depth platform.
FEATURES - Columns, platform and lift beam made entirely in aluminium giving very light overall weights as low as 110kgs. - The lift can be made to fit bodies as narrow as 1460mm with 800mm floor height. - Power pack mounted in the lift beam. - Quick and easy to fit using special angle brackets. - Simple 2 button control and isolator with optional wander lead.
COLUMN TAIL LIFTS
- Very low maintenance costs. - Light and easy to operate with torsion assisted platform closure.
The lift provides a facility to load the rear of the vehicle
- Aluminium platform supplied standard or folded (on demand).
TECHNICAL DATA
640
640
width over columns (W) 1460 min.
E 640
540
W (min)
E (max)
1460
800
1510
900
1560
1000
1610
1100
1640
1160
* Width over columns minimum 1460 mm (on demand) Centre of gravity of the vehicle depending on the platform depth and the type of the installations on the vehicle (see assembly instructions).The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
37
