F61 Series Adaptor Plate Assembly - Emerson Climate Technologies
F61 Series Adaptor Plate Assembly INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.
DESCRIPTION This adaptor plate assembly is designed for mounting a 1C20/1C21/1C26 series thermostat to the wall or to a junction box. The wall cover plate covers the junction box, wall damage, or old thermostat markings. The adaptor plate is designed to allow vertical thermostat mounting on vertical junction box. All kits may not have adaptor plate or all screws shown. Adaptor Plate
6-32 X 3/4” flat-head machine screw (4) F61-2499 Wall Plate
PRECAUTIONS
! CAUTION
NOTE
To prevent electrical shock and/or equipment damage, disconnect electrical power at main fuse or circuit breaker until installation is complete.
This instruction sheet is not intended as a wiring guide. Refer to the thermostat installation instructions to ensure proper wiring.
CONTENTS Description ........................................................ 1 Precautions ....................................................... 1 Installation ......................................................... 2
PART NO. 37-6423A
White-Rodgers is a division of Emerson Electric Co. www.white-rodgers.com
0223 Printed In U.S.A.
INSTALLATION FOR 1C20/1C21/1C26 DIGITAL THERMOSTATS
Locate and drill one clearance hole in wall
Figure 1. Mounting 1C20/1C21 thermostat to vertical junction box. Junction Box
Adaptor Plate
F61-2499 Wall Plate Base
1C20/1C21 Thermostat
Locate and drill one clearance hole in wall
Figure 2. Mounting 1C26 thermostat to vertical junction box.
Junction Box
Adaptor Plate
F61-2499 Wall Plate Subbase
Base
1C26 Thermostat
2
NOTE When installing wall cover plate and thermostat directly to wall, use the pointed screws supplied with the thermostat.
Figure 3. Mounting 1C20/1C21 thermostat to wall.
Wall
F61-2499 Wall Plate Base
1C20/1C21 Thermostat
NOTE When installing wall cover plate and thermostat directly to wall, use the pointed screws supplied with the thermostat.
Figure 4. Mounting 1C26 thermostat to wall.
Wall
F61-2499 Wall Plate
Subbase
Base
1C26 Thermostat
3
For additional product information, please visit www.white-rodgers.com
The Emerson logo is a trademark and service mark of Emerson Electric Co.
DESCRIPTION This adaptor plate assembly is designed for mounting a 1C20/1C21/1C26 series thermostat to the wall or to a junction box. The wall cover plate covers the junction box, wall damage, or old thermostat markings. The adaptor plate is designed to allow vertical thermostat mounting on vertical junction box. All kits may not have adaptor plate or all screws shown. Adaptor Plate
6-32 X 3/4” flat-head machine screw (4) F61-2499 Wall Plate
PRECAUTIONS
! CAUTION
NOTE
To prevent electrical shock and/or equipment damage, disconnect electrical power at main fuse or circuit breaker until installation is complete.
This instruction sheet is not intended as a wiring guide. Refer to the thermostat installation instructions to ensure proper wiring.
CONTENTS Description ........................................................ 1 Precautions ....................................................... 1 Installation ......................................................... 2
PART NO. 37-6423A
White-Rodgers is a division of Emerson Electric Co. www.white-rodgers.com
0223 Printed In U.S.A.
INSTALLATION FOR 1C20/1C21/1C26 DIGITAL THERMOSTATS
Locate and drill one clearance hole in wall
Figure 1. Mounting 1C20/1C21 thermostat to vertical junction box. Junction Box
Adaptor Plate
F61-2499 Wall Plate Base
1C20/1C21 Thermostat
Locate and drill one clearance hole in wall
Figure 2. Mounting 1C26 thermostat to vertical junction box.
Junction Box
Adaptor Plate
F61-2499 Wall Plate Subbase
Base
1C26 Thermostat
2
NOTE When installing wall cover plate and thermostat directly to wall, use the pointed screws supplied with the thermostat.
Figure 3. Mounting 1C20/1C21 thermostat to wall.
Wall
F61-2499 Wall Plate Base
1C20/1C21 Thermostat
NOTE When installing wall cover plate and thermostat directly to wall, use the pointed screws supplied with the thermostat.
Figure 4. Mounting 1C26 thermostat to wall.
Wall
F61-2499 Wall Plate
Subbase
Base
1C26 Thermostat
3
For additional product information, please visit www.white-rodgers.com
The Emerson logo is a trademark and service mark of Emerson Electric Co.
