Filtek Bulk Fill Flowable Brochure
™
Filtek
Bulk Fill Flowable Restorative
The bulk fill flowable that’s fast AND strong.
The bulk fill flowable that
reduces procedure times
without reducing your confidence. )TSFLOWABLEVISCOSITYPROVIDES EASYADAPTATION
With the trend toward faster and easier procedures, dentists are using bulk fill flowable restoratives in the posterior region— where 70% of restorations occur. Despite the significant time-savings gained with bulk placement, dentists are still concerned about completeness of cure, shrinkage stress and strength.
You want a bulk fill flowable to adapt easily, eliminating the chance for voids and providing a good marginal seal. But if it’s too fluid, it can flow out of place before you can cure it. In a simulated operatory, dentists comparing the leading bulk fill flowables gave Filtek Bulk Fill Flowable Restorative excellent marks for the way it handles and adapts to the cavosurface— with little or no instrumentation.
Filtek™ Bulk Fill Flowable Restorative is replacing concerns … with confidence. It’s been developed by 3M ESPE, one of the most trusted innovators of restorative solutions, to address the challenges of bulk placement, from start to finish.
Very Satisfied 7
/VERALLHANDLING
6
6
5
5
4
4
3
3
2
2
Very Dissatisfied 1
Does Not 1 Adapt
Filtek
™
Bulk Fill Flowable Restorative
#AVITY!DAPTATION
Adapts Easily 7
Filtek™ Bulk Fill Flowable Restorative Venus® Bulk Fill SureFil® SDR™ Flow Source: 3M ESPE internal data.
5
Summary of advantages
4.5
s5PTOSTRONGERTHANTHELEADING bulk fill flowable1
3.5
You can be confident in the depth of cure. $EPTHOF#URE 10 seconds
20 seconds
20 seconds
40 seconds
4
mm
3
s.EARLYTWICETHEWEARRESISTANCE of leading bulk fill flowables2
2.5 2
s#HOICEOFDELIVERIES EASY TO USECAPSULESORSYRINGES
1.5
s/RANGECOLORISEASYTOIDENTIFY and ask for
0.5
1
0
Universal
A1
A2
A3 2
s3HADES! ! ! 5NIVERSAL 1. Compared to SureFil SDR Flow. 2. In vitro data on file.
M7CM
Universal
A1
A2
A3
2
M7CM
Per ISO 4049, the recommended depth of cure can be no greater than 0.5 mm above the determined value. Source: 3M ESPE internal data.
!FAST EASYMMPLACEMENTREDUCES steps and chair time. One way dentists manage shrinkage stress is by layering the composite in small increments— which is time-consuming and can increase risk of contamination. Filtek Bulk Fill Flowable Restorative offers a faster, easier solution. With less shrinkage stress than many traditional flowable and universal composites, it can be placed in one 4 mm increment.
Low shrinkage stress #USPDEFLECTIONAFTERPLACINGMM 22 20 18
Any restorative used in posterior teeth should be strong and wear resistant. Filtek Bulk Fill Flowable Restorative contributes to the overall restoration by offering these distinct advantages. sUp to 50% stronger than the leading bulk fill flowable1 sNearly twice the wear resistance of leading bulk fill flowables2 It’s the only bulk fill flowable strong enough to be called Filtek™.
Traditional Flowables two 2mm increments
16 14
Microns
(ERESWHYYOUCANTRUST&ILTEK"ULK &ILL&LOWABLE2ESTORATIVETOLAST
12
Traditional Universal Restoratives two 2mm increments
10 8 6
Bulk Fill Flowables
Bulk Fill Posterior Restoratives
4 2 0
Filtek™ Bulk Fill Flowable Restorative The shrinkage stress generated by placing a 4 mm increment of Filtek™ Bulk Fill Flowable Restorative is in the same range as, or lower than, the stress generated by two 2 mm increments of many traditional flowable or universal composites. Source: 3M ESPE internal data.
Better wear resistance than leading bulk fill flowables
Higher compressive strength than leading competitors
BODY INVITRO
400
30
350
Microns lost/200,000 cycles
25 300
MPa
250 200 150 100
15 10 5
50 0
20
Filtek™ Bulk Fill SureFil® SDR™ Flow Flowable Restorative Source: 3M ESPE internal data.
Venus® Bulk Fill
0
Filtek™ Bulk Fill SureFil® SDR™ Flow Flowable Restorative Source: 3M ESPE internal data.
Venus® Bulk Fill
Choose Filtek™ Bulk Fill Flowable Restorative for fast and simple posterior restorations.
1
2
3
Prepare the tooth.
Dispense up to 4 mm of Filtek™ Bulk Fill Flowable Restorative into the prepared cavity and cure.
Place a 2 mm (minimum) capping layer of an esthetic composite, such as a Filtek™ universal restorative, and cure. Clinical photos courtesy of Dr. Reich, Seefeld, Germany
Ordering Information Filtek™ Bulk Fill Flowable Restorative Refill SHADE
Item # SYRINGE
Item # CAPSULE
A1
4862A1
4861A1
A2
4862A2
4861A2
A3
4862A3
4861A3
Universal
4862U
4861U
Item #
Product Description
3740T
Dispensing Tips 20 – 19-gauge Orange dispensing tips
SYRINGE SHADE REFILLS include 2 – 2g syringes; 20 dispensing tips; Technique Guide; Instructions for Use. Filtek™ Bulk Fill Flowable Restorative Refill—Syringe
Filtek™ Bulk Fill Flowable Restorative Refill—Capsule
CAPSULE SHADE REFILLS include 15 – 0.2g capsules; Technique Guide; Instructions for Use.
Customer Care Center: 1-800-634-2249 www.3MESPE.com/FiltekBulkFill
Dental Products
3M Canada
3M Center Building 275-2SE-03 St. Paul, MN 55144-1000 U.S.A. 1-800-634-2249
Post Office Box 5757 London, Ontario N6A 4T1 Canada 1-888-363-3685
Please recycle. Printed in U.S.A. 70-2013-0516-9
3M, ESPE and Filtek are trademarks of 3M or 3M Deutschland GmbH. Used under license in Canada. © 3M 2012. All rights reserved. SureFil SDR and Venus are not trademarks of 3M.
Filtek
Bulk Fill Flowable Restorative
The bulk fill flowable that’s fast AND strong.
The bulk fill flowable that
reduces procedure times
without reducing your confidence. )TSFLOWABLEVISCOSITYPROVIDES EASYADAPTATION
With the trend toward faster and easier procedures, dentists are using bulk fill flowable restoratives in the posterior region— where 70% of restorations occur. Despite the significant time-savings gained with bulk placement, dentists are still concerned about completeness of cure, shrinkage stress and strength.
You want a bulk fill flowable to adapt easily, eliminating the chance for voids and providing a good marginal seal. But if it’s too fluid, it can flow out of place before you can cure it. In a simulated operatory, dentists comparing the leading bulk fill flowables gave Filtek Bulk Fill Flowable Restorative excellent marks for the way it handles and adapts to the cavosurface— with little or no instrumentation.
Filtek™ Bulk Fill Flowable Restorative is replacing concerns … with confidence. It’s been developed by 3M ESPE, one of the most trusted innovators of restorative solutions, to address the challenges of bulk placement, from start to finish.
Very Satisfied 7
/VERALLHANDLING
6
6
5
5
4
4
3
3
2
2
Very Dissatisfied 1
Does Not 1 Adapt
Filtek
™
Bulk Fill Flowable Restorative
#AVITY!DAPTATION
Adapts Easily 7
Filtek™ Bulk Fill Flowable Restorative Venus® Bulk Fill SureFil® SDR™ Flow Source: 3M ESPE internal data.
5
Summary of advantages
4.5
s5PTOSTRONGERTHANTHELEADING bulk fill flowable1
3.5
You can be confident in the depth of cure. $EPTHOF#URE 10 seconds
20 seconds
20 seconds
40 seconds
4
mm
3
s.EARLYTWICETHEWEARRESISTANCE of leading bulk fill flowables2
2.5 2
s#HOICEOFDELIVERIES EASY TO USECAPSULESORSYRINGES
1.5
s/RANGECOLORISEASYTOIDENTIFY and ask for
0.5
1
0
Universal
A1
A2
A3 2
s3HADES! ! ! 5NIVERSAL 1. Compared to SureFil SDR Flow. 2. In vitro data on file.
M7CM
Universal
A1
A2
A3
2
M7CM
Per ISO 4049, the recommended depth of cure can be no greater than 0.5 mm above the determined value. Source: 3M ESPE internal data.
!FAST EASYMMPLACEMENTREDUCES steps and chair time. One way dentists manage shrinkage stress is by layering the composite in small increments— which is time-consuming and can increase risk of contamination. Filtek Bulk Fill Flowable Restorative offers a faster, easier solution. With less shrinkage stress than many traditional flowable and universal composites, it can be placed in one 4 mm increment.
Low shrinkage stress #USPDEFLECTIONAFTERPLACINGMM 22 20 18
Any restorative used in posterior teeth should be strong and wear resistant. Filtek Bulk Fill Flowable Restorative contributes to the overall restoration by offering these distinct advantages. sUp to 50% stronger than the leading bulk fill flowable1 sNearly twice the wear resistance of leading bulk fill flowables2 It’s the only bulk fill flowable strong enough to be called Filtek™.
Traditional Flowables two 2mm increments
16 14
Microns
(ERESWHYYOUCANTRUST&ILTEK"ULK &ILL&LOWABLE2ESTORATIVETOLAST
12
Traditional Universal Restoratives two 2mm increments
10 8 6
Bulk Fill Flowables
Bulk Fill Posterior Restoratives
4 2 0
Filtek™ Bulk Fill Flowable Restorative The shrinkage stress generated by placing a 4 mm increment of Filtek™ Bulk Fill Flowable Restorative is in the same range as, or lower than, the stress generated by two 2 mm increments of many traditional flowable or universal composites. Source: 3M ESPE internal data.
Better wear resistance than leading bulk fill flowables
Higher compressive strength than leading competitors
BODY INVITRO
400
30
350
Microns lost/200,000 cycles
25 300
MPa
250 200 150 100
15 10 5
50 0
20
Filtek™ Bulk Fill SureFil® SDR™ Flow Flowable Restorative Source: 3M ESPE internal data.
Venus® Bulk Fill
0
Filtek™ Bulk Fill SureFil® SDR™ Flow Flowable Restorative Source: 3M ESPE internal data.
Venus® Bulk Fill
Choose Filtek™ Bulk Fill Flowable Restorative for fast and simple posterior restorations.
1
2
3
Prepare the tooth.
Dispense up to 4 mm of Filtek™ Bulk Fill Flowable Restorative into the prepared cavity and cure.
Place a 2 mm (minimum) capping layer of an esthetic composite, such as a Filtek™ universal restorative, and cure. Clinical photos courtesy of Dr. Reich, Seefeld, Germany
Ordering Information Filtek™ Bulk Fill Flowable Restorative Refill SHADE
Item # SYRINGE
Item # CAPSULE
A1
4862A1
4861A1
A2
4862A2
4861A2
A3
4862A3
4861A3
Universal
4862U
4861U
Item #
Product Description
3740T
Dispensing Tips 20 – 19-gauge Orange dispensing tips
SYRINGE SHADE REFILLS include 2 – 2g syringes; 20 dispensing tips; Technique Guide; Instructions for Use. Filtek™ Bulk Fill Flowable Restorative Refill—Syringe
Filtek™ Bulk Fill Flowable Restorative Refill—Capsule
CAPSULE SHADE REFILLS include 15 – 0.2g capsules; Technique Guide; Instructions for Use.
Customer Care Center: 1-800-634-2249 www.3MESPE.com/FiltekBulkFill
Dental Products
3M Canada
3M Center Building 275-2SE-03 St. Paul, MN 55144-1000 U.S.A. 1-800-634-2249
Post Office Box 5757 London, Ontario N6A 4T1 Canada 1-888-363-3685
Please recycle. Printed in U.S.A. 70-2013-0516-9
3M, ESPE and Filtek are trademarks of 3M or 3M Deutschland GmbH. Used under license in Canada. © 3M 2012. All rights reserved. SureFil SDR and Venus are not trademarks of 3M.
