Finishing
Specifications:
Finishing
Drawings not to scale
Crown Molding 72" strips
Used to trim out small gaps between cabinet & wall, and/or floor. Scribe is rounded on one edge for a softer look.
Matching cabinet material used to trim out or fill in gaps between cabinets and/or walls. Both sides & one edge finished.
Three profiles to match our framed doors and mirrors
1¼"
Scribe
Filler
Molding Strips 72" strips
Toe Kick Used along toe kick area under of ensembles made of multiple units.
1¾" ½" ¾"
2¼"
Contemporary
These dimensions apply to all five molding profiles.
¼"
Square
1¼" 1¾"
or 8
4"
78
Classic Miter
Classic
36"
¼" Cut Filler or Scribe to length and secure in place with adhesive or fasteners of your choice.
¾"
8"
¾"
or 4
3¼"
36"
Scribe
84"
36" or 84" Lengths ¾" thick 6" wide
Deco Miter
Ogee Miter Rounded /"
6"
Filler
/ "
3 16
¾"
¼"
Scribe
36" or 48" Lengths ¼" thick ¾" wide
w w w. s t r ass e r wo o d .c o m
Filler
¼"
cut two lengths: for front and for toekick
Toe Kick
fills small gaps along walls or floor
Toe Kick
Strip across toe kick area to hide seams and scribe uneven floor
84" Lengths ¼" thick 3¼" wide ( 8 0 0 ) 4 45 - 0 494
Fillers are commonly ripped (cut) to the width desired by installer. Note that the space to fill may be wider or narrower at the top than at the bottom and requires a cut to fit. Toe kick strips will likely need to be scribed to the floor to accommodate unevenness.
C r a f t e d f o r yo u i n t h e USA
Finishing
Drawings not to scale
Crown Molding 72" strips
Used to trim out small gaps between cabinet & wall, and/or floor. Scribe is rounded on one edge for a softer look.
Matching cabinet material used to trim out or fill in gaps between cabinets and/or walls. Both sides & one edge finished.
Three profiles to match our framed doors and mirrors
1¼"
Scribe
Filler
Molding Strips 72" strips
Toe Kick Used along toe kick area under of ensembles made of multiple units.
1¾" ½" ¾"
2¼"
Contemporary
These dimensions apply to all five molding profiles.
¼"
Square
1¼" 1¾"
or 8
4"
78
Classic Miter
Classic
36"
¼" Cut Filler or Scribe to length and secure in place with adhesive or fasteners of your choice.
¾"
8"
¾"
or 4
3¼"
36"
Scribe
84"
36" or 84" Lengths ¾" thick 6" wide
Deco Miter
Ogee Miter Rounded /"
6"
Filler
/ "
3 16
¾"
¼"
Scribe
36" or 48" Lengths ¼" thick ¾" wide
w w w. s t r ass e r wo o d .c o m
Filler
¼"
cut two lengths: for front and for toekick
Toe Kick
fills small gaps along walls or floor
Toe Kick
Strip across toe kick area to hide seams and scribe uneven floor
84" Lengths ¼" thick 3¼" wide ( 8 0 0 ) 4 45 - 0 494
Fillers are commonly ripped (cut) to the width desired by installer. Note that the space to fill may be wider or narrower at the top than at the bottom and requires a cut to fit. Toe kick strips will likely need to be scribed to the floor to accommodate unevenness.
C r a f t e d f o r yo u i n t h e USA
