Fischer Fixings Guide - Ibstock
Ecoterre Earth Brick Recommended Fixings Table SUITABLE APPLICATIONS
18
37
89
Medium
Kitchen fittings
Bathroom fittings
Door / window frames
Brackets / hooks
Radiators
Light shelving
UX universal plug
FUR universal plug
FBS concrete screw
Heavy
Load Application
Light
Recommended fischer products
Heavy shelving
Skirting boards
18
*SWL recommended safe working load in tension
Boilers
*SWL (Kg)
Dry Wall / stud batons
Examples of Suitable Applications
FIS V 360 S resin
HSS DRILL SET Ideal for drilling in: ▪ Bronze ▪ Hard brass ▪ Steel ▪ Stainless steel
OVERVIEW ▪ A straight shank, industrial quality twist drill. Gives good results in most metals, woods and plastics. A tough durable drill bit. Type
19 Piece HSS Drill Set
Art.-No.
contents x 1 each of the following sizes:
package type
14499
1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0
metal case
qty. per pack
1
Universal plug UX
The universal fixing for a perfect grip in all walls.
OVERVIEW Universal plug UX
Universal plug UX-R with collar
Wood screw
Chipboard screw
Suitable for: ▪ Concrete ▪ Prestressed hollow-core concrete slabs ▪ Natural stone with dense structure ▪ Solid brick ▪ Solid sand-lime brick ▪ Solid block made from lightweight concrete ▪ Aerated concrete ▪ Solid panel made from gypsum ▪ Vertically perforated brick ▪ Perforated sand-lime brick ▪ Hollow block made from lightweight concrete ▪ Slabs made of perforated bricks ▪ Hollow concrete blocks etc.
▪ Gypsum plasterboard and gypsum fibreboards ▪ Chip boards For fixing of: ▪ Pictures ▪ Motion detectors ▪ Lamps ▪ Skirting ▪ Electric switches ▪ Small wall-mounted shelves ▪ Towel rails ▪ Lightweight mirror cabinets ▪ Letter boxes ▪ Hanging baskets ▪ Curtain rails
DESCRIPTION ▪ Nylon universal fixing ▪ Expansion in solid building materials, reliable knot formation in all cavities. ▪ Use UX 6 long versions with fischer spacing screws for maximum load-bearing capacity in perforated materials, double-skinned plasterboard and for bridging non-loadbearing layers.
Advantages/Benefits
▪ The unique design enables use in almost all building materials. ▪ Diagonal connection ridges for optimum screw guidance. ▪ New saw-tooth anti-rotation lock prevents the fixing rotating in the drill hole. ▪ Low turning and high tightening torque - the first universal fixing that really “holds“.
▪ Can be used with wood and chipboard screws between 4 and 12 mm. ▪ Integral drive-in lock enables optimal push-through installation. If pre-assembled with screw. ▪ The collar of the UX R prevents it slipping into the drill hole.
INSTALLATION
Type of installation
Pre-positioned installation
▪ Pre-positioned and push-through installation.
Installation information
▪ With push-through installation, use the largest possible screw diameter. Push-through installation ▪ Drill only in a rotary motion (switch off hammer) in perforated and hollow brick and aerated concrete, and use a metal bit for plasterboard. ▪ If using hook screws and eye screws in cavity bricks, it is essential that they have a collar, so that the screw can be tightened enough to collapse the plug fully. ▪ The required screw length is given by the fixing length + thickness of the item being attached + 1 x screw diameter.
TECHNICAL DATA UX - without collar
Type
Art.-No.
UX 5 UX 5 R UX 6 x 35 UX 6 x 35 R UX 6 x 50 UX 6 x 50 R UX 8 x 50 UX 8 x 50 R UX 10 x 60 UX 10 x 60 R UX 12 x 70 UX 14 x 75
94721 94722 62754 62756 72094 72095 77869 77870 77871 77872 62758 62757
UX 6 x 35R S/20 UX 6 x 50R S/20 UX 8 x 50R S/15 UX 8 x 50R S/25 UX 10 x 60 S/20
94758 94759 94762 94760 94761
ID
UX R - with collar
drill-Ø
anchor length
usable length
chipboard screw
do
t
dp
l
da
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[Ø mm]
pcs.
5 5 6 6 6 6 8 8 10 10 12 14 6 6 8 8 10
40 40 45 45 60 60 60 60 75 75 85 95 60 75 70 80 85
9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 12,5 12,5 9,5 9,5 9,5 9,5 12,5
30 30 35 35 50 50 50 50 60 60 70 75 35 50 50 50 60
20 20 15 25 20
3-4 3-4 4-5 4-5 4-5 4-5 4,5 - 6 4,5 - 6 6-8 6-8 8 - 10 10 - 12 4.5 x 60 4,5 x 75 5 x 70 5 x 80 6 x 85
100 100 100 100 100 100 100 100 50 50 25 20 25 25 25 25 10
0 7 9 3 3 0 2 8 5 2 7 0 6 3 3 9 6
min. drill hole depth min. panel thickness
UX RS- with chipboard screw qty. per box
1 x screw-ø
LOADS Recom. loads Nrec [kN] and mean ultimate loads Nu [kN]. These values apply to the use of wood screws with the given screw diameter. When use chipboard screws these values should be reduced by 30%. Fixing type Wood screw diameter [mm] Substrate Concrete ≧ C12/C55 Solid brick ≧ Mz12 (DIN 105) Vertical perforated brick ≧ Hlz12 (ρ ≧ 1.0 kg/dm3, DIN 105) Sand-lime perforated brick ≧ KSL12 (DIN 106) Aerated concrete ≧ PB2 Aerated concrete ≧ PB4 Plasterboard 12,5 mm Plasterboard 2 x 12.5 mm Gypsum fibre board (Fermacell)
UX 6 x 35 5 Nrec Nu 0.4 2.4 0.2 2.0 0.2 0.9 0.4 2.6 0.05 0.4 0.2 1.0 0.1 0.5 0.15 0.7 0.2 1.5
UX 6 x 50 (R) 6 Nrec Nu 0.6 2.5 0.3 2.1 0.2 0.9 0.4 2.8 0.1 0.5 0.2 1.3 0.1 0.5 0.15 0.8 0.2 1.5
UX 8 x 50 5 Nrec Nu 0.6 2.5 0.3 2.1 0.2 1.0 0.5 3.2 0.15 0.7 0.3 1.7 0.1 0.6 0.15 0.8 0.2 1.7
UX 10 x 60 8 Nrec Nu 1.0 5.8 0.5 3.7 0.2 1.4 0.6 4.4 0.2 1.1 0.4 2.7 0.1 0.6 0.15 1.1 0.25 1.9
UX 12 x 70 10 Nrec Nu 1.5 8.8 0.7 8.0 0.3 2.1 0.8 5.0 0.2 1.6 0.6 3.7 – – – – – –
UX 14 x 75 12 Nrec Nu 1.8 13.2 0.8 8.0 0.4 3.2 0.8 5.0 0.2 1.7 0.7 3.9 – – – – – –
Universal frame fixing FUR The high-performance facade fixing - locks in each building material.
OVERVIEW FUR-T - fischer safety screw with countersunk head FUR 8-SS and FUR 10-SS fischer safety screw with hexagon-head FUR 10 and FUR 14 F US fischer safety screw with hexagon-head
Approved for: ▪ ▪ ▪ ▪ ▪
Concrete Solid brick Solid sand-lime brick Vertically perforated brick Perforated sand-lime block ▪ Hollow block made from lightweight concrete ▪ No-fines lightweight concrete ▪ Multilayer composite concrete wall
Also suitable for:
▪ Natural stone with dense structure ▪ Solid block made from lightweight concrete ▪ Solid panel made from gypsum ▪ Aerated concrete
DESCRIPTION ▪ Universal frame fixing. ▪ Anchorage in solid materials by means of friction locking. ▪ The asymmetrical close set teeth expand and formlock in hollow materials. ▪ Fixing sets with A4 stainless steel safety screws can for applications in damp conditions.
Advantages/benefits ▪ Universal for all building materials. ▪ All the fixings with preinstalled screw.
▪ Patented asymmetrical teeth guarantee high load-bearing capacity in solid and perforated brick. ▪ Integral hammer-in stop prevents the fixing from spreading prematurely during installation. ▪ The FUR-FUS version does not require additional washers and prevents contact corrosion. ▪ Large range for wood and metal constructions (internal and exterior) for many applications.
INSTALLATION
Type of installation
▪ Push-through installation
Installation tips
▪ We advise countersunk-head screws for fixing wooden structures, and fixings with a flat edge and hexagon-head bolts for metal structures. ▪ The hexagon-head with integral washer also has an integral g̃ -socket. ▪ With vertically perforated bricks only use rotary drilling (no impact drilling).
For fixing of:
▪ Facade and roof substructures made of wood and metal ▪ Gates ▪ Door frames ▪ Fire protection doors ▪ Windows ▪ Kitchen cabinets ▪ Wardrobes ▪ Squared timbers ▪ Facings
Universal frame fixing FUR TECHNICAL DATA FUR-T - fischer safety screw with countersunk head Type
Art.-No.
ID approvals
DIBt
FUR 8 x 80 T FUR 8 x 100 T FUR 8 x 120 T FUR 10 x 80 T FUR 10 x 100 T FUR 10 x 115 T FUR 10 x 135 T FUR 10 x 160 T FUR 10 x 185 T FUR 10 x 200 T FUR 10 x 230 T FUR 14 x 100 T FUR 14 x 140 T FUR 14 x 165 T FUR 14 x 180 T FUR 14 x 210 T FUR 14 x 240 T FUR 14 x 270 T FUR 14 x 300 T FUR 14 x 330 T FUR 14 x 360 T FUR 8 x 80 T A4 FUR 8 x 100 T A4 FUR 8 x 120 T A4 FUR 10 x 80 T A4 FUR 10 x 100 T A4 FUR 10 x 115 T A4 FUR 10 x 135 T A4 FUR 10 x 160 T A4 FUR 10 x 185 T A4 FUR 10 x 200 T A4 FUR 10 x 230 T A4 FUR 14 x 140 T A4 FUR 14 x 165 T A4 FUR 14 x 180 T A4 FUR 14 x 210 T A4
70110 70111 70112 88756 88757 88760 88758 88759 88761 88764 88762 48711 48712 48713 48714 48844 48715 48716 90759 90760 90761 70120 70121 70122 88784 88785 88791 88786 88787 88788 88789 88790 48719 48720 48721 48845
2 9 6 1 8 8 5 2 5 6 2 2 9 6 3 7 0 7 7 3 0 1 8 5 4 1 2 8 5 2 9 5 8 4 1 4
For matching cover caps ADT, see page 158.
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
FUR-T A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
fischer safety screw
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10 10 10 10 14 14 14 14 14 14 14 14 14 14 8 8 8 10 10 10 10 10 10 10 10 14 14 14 14
90 110 130 90 110 125 145 170 195 210 240 115 155 180 195 225 255 285 315 345 375 90 110 130 90 110 125 145 170 195 210 240 155 180 195 225
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 120 80 100 115 135 160 185 200 230 100 140 165 180 210 240 270 300 330 360 80 100 120 80 100 115 135 160 185 200 230 140 165 180 210
10 30 50 10 30 45 65 90 115 130 160 30 70 95 110 140 170 200 230 260 290 10 30 50 10 30 45 65 90 115 130 160 70 95 110 140
6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280 10 x 310 10 x 340 10 x 370 6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 10 x 150 10 x 175 10 x 190 10 x 220
drive
qty. per box
pcs.
T30 T30 T30 T40 T40 T40 T40 T40 T40 T40 T40 T50 T50 T50 T50 T50 T50 T50 T50 T50 T50 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40 T40 T50 T50 T50 T50
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
TECHNICAL DATA FUR 8-SS and FUR 10-SS - fischer safety screw with hexagon-head Type
Art.-No.
ID approvals
DIBt
70130 70131 70132 88776 88777 88783 88778 88779 88780 88781 88782 70140 70141 88792 88793 88799 88794 88795 88796 88797 88798
FUR 8 x 80 SS FUR 8 x 100 SS FUR 8 x 120 SS FUR 10 x 80 SS FUR 10 x 100 SS FUR 10 x 115 SS FUR 10 x 135 SS FUR 10 x 160 SS FUR 10 x 185 SS FUR 10 x 200 SS FUR 10 x 230 SS FUR 8 x 80 SS A4 FUR 8 x 100 SS A4 FUR 10 x 80 SS A4 FUR 10 x 100 SS A4 FUR 10 x 115 SS A4 FUR 10 x 135 SS A4 FUR 10 x 160 SS A4 FUR 10 x 185 SS A4 FUR 10 x 200 SS A4 FUR 10 x 230 SS A4
0 7 4 9 6 7 3 0 6 3 0 9 6 9 6 8 3 0 7 4 1
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
FUR-SS A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10
90 110 130 90 110 125 145 170 195 210 240 90 110 90 110 125 145 170 195 210 240
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 120 80 100 115 135 160 185 200 230 80 100 80 100 115 135 160 185 200 230
10 30 50 10 30 45 65 90 115 130 160 10 30 10 30 45 65 90 115 130 160
6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 6 x 85 6 x 105 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235
FUR 14 FUS - fischer safety screw with hexagon-head Type
Art.-No.
ID approvals
DIBt
FUR 10 x 80 FUS FUR 10 x 100 FUS FUR 14 x 80 FUS FUR 14 x 100 FUS FUR 14 x 140 FUS FUR 14 x 165 FUS FUR 14 x 180 FUS FUR 14 x 210 FUS FUR 14 x 240 FUS FUR 14 x 270 FUS FUR 14 x 300 US FUR 14 x 330 US FUR 14 x 360 US FUR 10 x 80 FUS A4 FUR 14 x 80 FUS A4 FUR 14 x 100 FUS A4 FUR 14 x 140 FUS A4 FUR 14 x 165 FUS A4 FUR 14 x 180 FUS A4 FUR 14 x 210 FUS A4 FUR 14 x 240 FUS A4 FUR 14 x 270 FUS A4
3) 4) 3) 4) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 3) 4) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2)
93527 97797 48724 48725 48726 48727 48728 48842 48729 48730 90762 90763 90764 93528 48731 48732 48733 48734 48735 48843 48736 48737
9 2 2 9 6 3 0 3 7 3 7 4 1 6 0 7 4 1 8 0 5 2
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
1) Collar: Ø 26 x 3 mm. 2) Additional Bit T50 is integrated into the hexagon head. 3) Collar: Ø 18 x 2 mm. 4) Additional Bit T40 is integrated into the hexagon head.
fischer safety width across nut qty. per box screw
drill-Ø
SW pcs.
SW10 SW10 SW10 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW10 SW10 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW13
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
FUR-FUS A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
fischer safety width across nut qty. per box screw
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
10 10 14 14 14 14 14 14 14 14 14 14 14 10 14 14 14 14 14 14 14 14
90 80 95 115 155 180 195 225 255 285 315 345 375 90 95 115 155 180 195 225 255 285
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 80 100 140 165 180 210 240 270 300 330 360 80 80 100 140 165 180 210 240 270
10 30 10 30 70 95 110 140 170 200 225 255 285 10 10 30 70 95 110 140 170 200
7 x 85 7 x 105 10 x 90 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280 10 x 305 10 x 335 10 x 365 7 x 85 10 x 90 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280
SW pcs.
SW13 SW13 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW13 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17
50 50 50 50 50 50 50 50 50 50 20 20 20 50 50 50 50 50 50 50 50 50
LOADS Recommended loads Nrec 1) [kN] and mean ultimate loads Nu [kN] with large axial spacing and edge distance Fixing type Substrate Concrete ≧ C12/15 Solid brick ≧ Mz12 (DIN 105) Solid sand lime brick ≧ KS12 (DIN 106) Vertical perforated brick ≧ Hlz12 (ρ≧1.0 kg/dm³, DIN 105) Perforated sand lime brick ≧ KSL12 (DIN 106) Hollow block ≧ Hbl2 (lightweight concrete, DIN 18151) 3) Solid block ≧ V2 (lightweight concrete, DIN 18152)
FUR 8 [kN] [kN] [kN] [kN] [kN] [kN] [kN]
Nrec1) 1.2 0.7 1.1 0.13 0.63 0.17 0.56
FUR 10 Nu 8.1 5.0 7.8 0.9 4.4 1.2 3.9
Nrec1) 2.1 1.4 1.6 0.37 0.48 0.46 0.71
FUR 14 Nu 10.0 10.0 12.8 2.6 3.3 3.2 5.0
1) Safety factor for the material (γM) and for the load (γL) included. 2) Due to large range of scatter of test results not suitable, the failure of the substrate varies so greatly that no reproducible values can be given. 3) The expanding part of the fixing must anchor in the wall of the brick.
Nrec1) 3.1 1.8 2.8 0.5 0.6 0.31 0.5
Nu 21.9 12.5 19.7 2) 2)
2.2 2)
Concrete screw FBS
The simple and time-saving threaded concrete screw for the cracked or tension zone.
OVERVIEW Concrete screw FBS-P, panhead
Concrete screw FBS-SK, countersunk head Concrete screw FBS-US, hexagon head with integrated washer Concrete screw FBS-S, hexagon head Concrete screw FBS-M8, outside diameter M8 Concrete screw FBS-M8/M10, internal thread M8/M10
FBS M12 Concrete screw with thread and hexagon drive, stainless steel
DESCRIPTION ▪ Self-tapping concrete screw for push-through and prior insertion installation ▪ When the concrete screw is screwed into the hole, the thread taps into the concrete and creates a positive fit anchorage. ▪ A4 stainless steel version for outdoor use or in damp conditions.
Advantages/benefits
▪ Setting and installation in one working operation saves time. ▪ Completely removable anchor, therefore particularly suitable for temporary fixings (e.g. shuttering supports). ▪ Virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances. ▪ Serrations on the thread makes the screws easy to screw in. ▪ Re-usability of the screws reduces costs. ▪ Fixing with different head designs for different areas of
Approved for: ▪ Cracked and non-cracked concrete C20/25 to C50/60 ▪ Lightweight ceilings and suspended ceilings according to DIN 18168 ▪ Statically comparable fixings Also suitable for: ▪ Concrete C12/15 ▪ Natural stone with dense structure ▪ Solid brick, ▪ Solid sand-lime brick For fixing of: ▪ Handrails ▪ Consoles ▪ Ladders ▪ Cable trays ▪ Machines ▪ Gates ▪ Facades ▪ Window elements ▪ Battens
▪ ▪ ▪ ▪ ▪ ▪ ▪
Metal profiles Wire hangers Chains Cables Punched tapes Ventilation pipes Substructures made of wood and metal ▪ Ceilings
INSTALLATION
Type of installation
▪ Pre-positioned installation ▪ Push-through installation
Installation tips
▪ We recommend use of an impact wrench with tangential impact (see the table for power output).
Performance details of impact wrench Concrete screw FBS 5 FBS 6 FBS 8 FBS 10
recommended installation torque 100 [Nm] 200 [Nm] 300 [Nm]
Use nuts (black) which fit percussion power screwdrivers!
TECHNICAL DATA Concrete screw FBS-P panhead, zinc-plated steel Type
Art.-No.
ID
approval DIBt
FBS 5/5 P FBS 6/5 SK FBS 6/5 P FBS 6/25 P
66774 66935 66939 66948
3 8 6 8
▯ ▯ ▯ ▯
drill-Ø
drill-hole diameter in object
Concrete screw FBS-SK countersunk head, zinc-plated steel screw diameter
drill hole depth anchorage depth
do
df
ds
h0
hef
t fix
[mm]
[Ø mm]
[mm]
[mm]
[mm]
[mm]
5 6 6 6
7 8 8 8
6,5 7,6 7,6 7,6
65 65 65 65
55 55 55 55
5 5 5 25
Concrete screw FBS-M8, outside diameter M8, zinc-plated steel Type
Art.-No.
ID
approval
DIBt
FBS 6 M8 FBS 6 M8/M10I
66949 66950
5 1
▯ ▯
drill-Ø
Art.-No.
ID
approval
drill-hole diameter in object
screw diameter
min. drill-hole anchorage depth depth for through fixings
do
df
ds
td
hef
[mm]
[Ø mm]
[mm]
[mm]
[mm]
6 6
8 8
7,6 7,6
60 60
55 55
DIBt
FBS 8/5 US FBS 8/25 US FBS 8/15 S FBS 10/5 S FBS 10/15 S FBS 10/25 S
66956 66957 66958 67062 67063 67168
FBS 10/10 S A4 FBS 10/20 S A4
67169 98336
3 0 7 0 7 9 6 2
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
actuation
qty. per box
T30 T30 T30 T30
100 100 100 100
pcs.
Concrete screw FBS-M8/M10, internal thread M8/M10, zinc-plated steel
Concrete screw FBS-US, hexagon head with integrated washe Type
max. usable length
drill-hole diameter in object
thread
width across nut qty. per box
M
SW
M8 M8
SW10 SW13
pcs.
100 100
Concrete screw FBS-S, hexagon head screw diameter
drill hole depth anchorage depth
max. usable length
do
df
ds
h0
hef
t fix
[mm]
[Ø mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10
12 12 12 14 14 14 14 14
10,5 10,5 10,5 12,5 12,5 12,5 12,5 12,5
90 110 100 100 110 120 105 115
75 75 75 85 85 85 85 85
5 25 15 5 15 25 10 20
actuation
qty. per box
T40/SW13 T40/SW13 SW 16 SW 18 SW 18 SW 18 SW 17 SW 17
100 100 100 50 50 50 50 50
pcs.
Concrete screw FBS TECHNICAL DATA FBS M12 Concrete screw with thread and hexagon drive, zinc-plated steel Type
FBS 10 M12/30 FBS 10 M12/53 FBS 10 M12/40 A4 FBS 10 M12/60 A4
1) 1) 1) 1)
Art.-No. ID approval
drill-Ø
DIBt
do [mm] 10 10 10 10
3 9 9 9
98339 98340 98337 98338
▯ ▯ ▯ ▯
drill-hole screw diameter in diameter object df ds [Ø mm] [mm] 14 12,5 14 12,5 14 12,5 14 12,5
FBS M12 A4 Concrete screw with thread and hexagon drive, stainless steel drill hole anchorage max. usable depth depth length h0 [mm] 125 148 135 155
hef [mm] 85 85 85 85
t fix [mm] 30 53 40 60
thread
width qty. per box across nut
M
SW
M 12 M 12 M 12 M 12
9 9 9 9
pcs. 50 50 50 50
1) Including nuts and washer, not pre-assembled.
LOADS Design resistant and recommended loads for single anchors of fischer Concrete screw FBS with large axial spacing and edge distance Anchor size Effective anchorage depth Drill hole depth Screw in depth Drill hole diameter Design resistant loads NRd and VRd [kN]
hef h0 ≧ hnom ≧ d0
[mm] [mm] [mm] [mm]
Non-cracked concrete FBS 8 FBS 10 50 60 85 95 75 85 8 10
FBS 5* 55 60 55 5
Cracked concrete FBS 6* FBS 8* 55 50 60 85 55 75 6 8
FBS 10 60 95 85 10
gvz A4 gvz [kN] A4
7.2 – 10.3 –
9.0 9.0 16.9 19.0
0.4 – – –
1.1 – – –
3.4 – 10.4 –
5.4 5.4 16.9 17.6
gvz A4 gvz [kN] A4
5.1 – 7.4 –
6.4 6.4 12.1 13.6
0.3 – – –
0.8 – – –
2.4 – 7.4 –
3.9 3.9 12.1 12.6
gvz 19.0 A4 – Component dimensions, minimum axial spacings and edge distances Min. axial spacing1) smin [mm] 50 Min. edge distance1) cmin [mm] 70 Min. structural component thickness hmin [mm] 120
40.0 36.8
– –
8.0 –
19.0 –
40.0 36.8
60 65 130
50 100 110
50 100 110
50 70 120
60 65 130
Tensile
0°
NRd [kN]
Shear
90°
VRd
Tensile
0°
Nrec [kN]
Shear
90°
Vrec
Recommended loads Nrec and Vrec [kN]
Recommended bending moment Mrec [Nm] Mrec [Nm]
* For the fixing of lightweight suspended ceiling constructions only. 1) For min. axial spacing and min. edge distance the above described loads have to be reduced! (See design software “CC-Compufix”) All load values apply for concrete C20/25 without edge or spacing influence. Design resistant loads: material safety factor γM is included. Material safety factor γM depends on type of anchor. Recommended loads: material safety factor γM and safety factor for load γL = 1.4 are included. The conditions of application differ from those given in the German Approval. For further detailed information about approvals please contact your local fischer representative.
Injection mortar FIS V
The high-performance hybrid mortar in the shuttle cartridge.
OVERVIEW Injection mortar FIS V 360 S, styrene free
Static mixer FIS S
Injection mortar FIS VS 150C, styrene free
Can be extruded using a standard silicone gun
Approvals: ▪ European Technical Approval Option 7 in conjunction with Threaded rods FIS A resp. RG M for non-cracked concrete. ▪ German approval (DIBt) in conjunction with injection anchor sleeve FIS H M and injection anchor parts FIS G and FIS E for solid and hollow bricks (solid brick also without anchor sleeve). ▪ German approval (DIBt) for aerated cement in conjunction with cone drill PBB, centering sleeve PBZ and Threaded rod FIS G. ▪ German approval (DIBt) for reinforcement bars. ▪ German approval (DIBt) for Remedial wall tie VBS 8. ▪ German approval (DIBt) for Weather facing renovation system FWS. ▪ ICC-Approval for threaded rods and rebars
For fixing of: ▪ Steel constructions ▪ Railings ▪ Hand-rails ▪ Consoles ▪ Ladders ▪ Machines ▪ Cable trays ▪ Staircases ▪ Gates ▪ Facades ▪ Window elements ▪ High racks ▪ Canopies ▪ Stand-off installations
DESCRIPTION ▪ Styrene-free, quick-curing high-performance hybrid mortar (contains vinyl ester resin and cement). ▪ Resin and cement as well as water and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer. ▪ Partially-used cartridges can easily be reused by changing the static mixer.
Advantages/Benefits
▪ High-performance hybrid mortar for highest loads in almost all building materials. ▪ Universal fixing system for a broad range of applications on building sites. ▪ Expansion-free anchoring allows low axial spacings and edge distances. ▪ Extensive range of accessories for a wide variety of applications. ▪ Ergonomic injection guns for quick and easy installation. ▪ A variety of approvals cover many applications in nearly all building material and guarantee maximum safety. ▪ First injection system world-wide with approvals for concrete, reinforcement bars, solid bricks, perforated bricks and aircrete.
Accessories / Recommended loads ▪ ▪ ▪ ▪ ▪
For fixing in concrete For fixing in masonry For fixing in aerated concrete For reinforcement bars Appropriate injection guns
TECHNICAL DATA Injection mortar FIS V 360 S, styrene free Type
Art.-No. ID
approvals
contents
languages on the lable
shelf life
qty. per box
months
pcs.
-
18
6
-
18
6
-
-
10
DIBt ■ ETA
FIS V 360 S
94405 9
FIS VS 150C
45303 2
FIS S
61223 1
▯
■
1 cartridge 360 ml + 2 static mixers 1 cartridge 154ml + 2 static mixers 10 static mixer FIS V 360 S
CURING TIME Gelling and curing time of fischer FIS V Cartridge temperature (mortar)
+ 5°C — + 10°C + 10°C — + 20°C + 20°C — + 30°C + 30°C — + 40°C
Gelling time
13 min. 5 min. 4 min. 2 min.
Temperature at anchoring base - 5°C — ± 0°C ± 0°C — + 5°C + 5°C — + 10°C + 10°C — + 20°C + 20°C — + 30°C + 30°C — + 40°C
Curing time 24 hrs. 3 hrs. 90 min. 60 min. 45 min. 35 min.
The above times apply from the moment of contact between resin and hardener in the static mixer. For installation, the cartridge temperature must be at least +5°C. For longer installation times, i.e. when interruptions occur in work, the mixer should be replaced.
Resin Accessories OVERVIEW Internally threaded sockets FIS E Internally threaded sockets FIS M I
Approval:
▪ German approval (DIBt) in conjunction with Injection mortar FIS V, and FIS G FIS E for solid and hollow material
With anchor sleeve suitable for: Injection anchor sleeve, plastic FIS H K
Injection anchor sleeve with net FIS H N Injection anchor sleeve, 1 m length FIS H L
▪ ▪ ▪ ▪ ▪ ▪ ▪
Vertically perforated bricks Perforated sand-lime brick Hollow blocks Solid brick Solid sand-lime brick Hollow pumice plank Slabs made of perforated bricks and other perforated blocks
Without anchor sleeve suitable for: ▪ ▪ ▪ ▪
Lightweight concrete Solid bick Solid sand-lime bricks Full pumice stone and other solid building materials ▪ Aerated concrete
For fixing of: ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Machines Gratings Gates Hand-rails Consoles Pipelines Sanitary equipment Cable trays Facades Awnings Canopies Wooden constructions
DESCRIPTION ▪ Injection anchor sleeves, threaded rods and internallythreaded sockets, specially for use with Injection mortars FIS V, FIS VS, FIS VT or FIS P in masonry materials. ▪ The anchor sleeve saves mortar in hollow materials and centres the anchor in the drill hole. ▪ In solid building materials the anchor sleeves are not required. ▪ In solid building materials, the injection mortar bonds the entire surface of the anchor rod / internally-threaded sockets to the wall of the drilled hole. ▪ With hollow materials the mortar adapts to the anchoring substrate and bears the load primarily through a mechanical interlock. ▪ Threaded rod FIS G made of A4 stainless steel for outdoor use and in damp conditions.
▪ Expansion-free fixing allows small axial spacings and edge distances. ▪ Extensive range for various cost-efficient applications. ▪ The mortar largely seals the drill-hole.
Advantages/Benefits
▪ High-performance mortars allow high loads in all building materials. ▪ Approval covers common masonry materials for maximum safety.
INSTALLATION in perforated brick with anchor sleeve
Type of Installation
▪ Pre-positioned installation
Installation information
▪ In solid building materials the drill hole must be cleaned thoroughly (blow out 2 x, brush out 2x, blow out 2 x).
in solid materials without anchor sleeve
TECHNICAL DATA Injection anchor sleeve, metal FIS H M Type
Art.-No.
ID
approval
DIBt
FIS H 16 x 75 M FIS H 16 x 100 M FIS H 20 x 75 M FIS H 20 x 100 M FIS H 20 x 200 M
58068 48270 15371 49001 48271
4 4 0 3 1
▯ ▯ ▯ ▯
drill-Ø
min. drill hole depth Min. anchorage depth anchor
Min. anchorage depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
16 16 20 20 20
90 105 90 105 210
82 102 82 102 200
75 95 75 95 200
No. of scale divisions on cartridge
fits
10 15 15 19 40
M8 - M10 M8 - M10 M12 - M14 M12 - M14 M12 - M14
qty. per box
pcs.
10 10 20 10 10
TECHNICAL DATA Injection anchor sleeve with net FIS H N Type
Art.-No.
50470 50472 50474
FIS H 16 x 85 N FIS H 18 x 85 N FIS H 20 x 85 N
ID
3 7 1
drill-Ø
min. drill hole Min. anchorage Min. anchorage depth depth anchor depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
16 18 20
95 95 95
90 90 90
85 85 85
No. of scale divisions on cartridge
fits
qty. per box
15 17 19
Ø8/M8 Ø10/M10/FIS 18/M8 I Ø12/M12/FIS 20/M10 I
20 20 20
No. of scale divisions on cartridge
fits
qty. per box
6 9 7 10 11 12
Ø4/M4 - Ø8/M8 Ø4/M4 - Ø8/M8 Ø6/M6 - Ø10/M10 Ø6/M6 - Ø10/M10 Ø8/M8 - Ø12/M12 Ø8/M8 - Ø12/M12
20 20 10 10 10 10
fits
qty. per box
pcs.
Injection anchor sleeve, plastic FIS H K Type
FIS H 12 x 60 K FIS H 12 x 80 K FIS H 14 x 70 K FIS H 14 x 90 K FIS H 16 x 80 K FIS H 16 x 100 K
Art.-No.
1) 1) 1)
50432 58045 50436 58046 50433 58047
ID
1 5 9 2 8 9
drill-Ø
min. drill hole Min. anchorage Min. anchorage depth depth anchor depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
12 12 14 14 16 16
70 90 80 100 90 110
60 80 70 90 80 100
60 80 70 90 80 100
pcs.
1) Anchor sleeve with up to 20mm plaster bridging.
Injection anchor sleeve, plastic FIS H K Type
FIS H 12 x 50 K FIS H 12 x 85 K FIS H 16 x 85 M FIS H 16 x 130 M FIS H 20 x 85 M
Art.-No.
41900 41901 41902 41903 41904
ID
7 4 1 8 5
drill-Ø
min. drill hole Min. anchorage Min. anchorage No. of depth depth anchor depth sleeve scale divisions on cartridge
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
12 12 16 16 20
60 95 95 140 95
-
-
pcs.
5 10 12 15 15
-
50 50 50 50 50
Injection anchor sleeve, 1 m length FIS H L Type
FIS H 12 x 1000 L FIS H 16 x 1000 L FIS H 22 x 1000 L
Art.-No.
50598 50599 45301
ID
4 1 8
drill-Ø
total length
do
l
[mm]
[mm]
12 16 22
1000 1000 1000
fits
qty. per box
pcs.
Ø6 / M 6 - Ø8 / M 8 Ø10/M10 Ø12/M12 - Ø16/M16
10 10 6
TECHNICAL DATA FIS brush Ø 14/20 mm
Type
FIS-brush Ø14/20 mm FIS-brush Ø20/30 mm
FIS brush Ø 20/30 mm
Art.-No.
ID
qty. per box
48980 48981
2 9
2 2
Internally threaded sockets FIS M I Type
Art.-No.
ID
approval ▯ DIBt
FIS 18/M8 I FIS 20/M10I
50480 50481
FIS E 11 x 75 M8 FIS E 15 x 75 M10 FIS E 15 x 75 M12
58069 16248 16249
2 9 1 4 1
▯ ▯ ▯ ▯ ▯
effect. anchorage depth
Internally threaded sockets FIS E min. bolt penetration
max. bolt penetration
internal thread ds
hef
e2
e1
[mm]
[mm]
[mm]
85 85 75 75 75
8 10 8 10 12
23 28 60 60 60
fits
qty. per box
pcs.
M8 M 10 M8 M 10 M 12
FIS H 18 x 85 N FIS H 20 x 85 N FIS H 20 x 75 M FIS H 20 x 75 M FIS H 20 x 75 M
20 20 20 20 20
CORRECT USE WITHOUT ANCHOR SLEEVE
Suitable for: Lightweight concrete, solid brick, solid sand-lime brick, solid pumice and other solid materials Type
Dimension Approval Usable length tfix [mm] Drill diameter d0 [mm] Drill depth td [mm] Suitable brush-∅ [mm] Anchoring depth hef [mm] No. of scale units
Approved for: Solid bricks ≧ Mz 12, solid sand-lime bricks ≧ KS 12.
Injection threaded rod FIS G M...
Internally threaded sockets FIS E...
8 x 100 8 x 125 8 x 125 10 x 95 10 x 110 10 x 145 12 x 105 12 x 130 12 x 150 11 x 75 15 x 75 15 x 75 M8 M10 M12 15 40 20 10 25 40 15 40 40 — — — 10 10 10 12 12 12 14 14 14 14 18 18 80 80 80 90 90 90 110 110 110 90 90 90 14 14 14 14 14 14 20 20 20 20 20 20 75 75 95 75 75 95 75 75 95 75 75 75 3 3 4 4 4 5 5 5 7 4 4 4
1) With detachable plaster bridging. Included in German approval.
Screw-inserts FIS E...K
5 x 45 12 x 100 6 x 75 1) 8 x 85 1) 10 x 95 1)
— 10 45 14 45 2
— 18 100 20 100 7
— 10 60 14 60 3
— 14 70 20 70 4
— 14 80 20 80 5
18
37
89
Medium
Kitchen fittings
Bathroom fittings
Door / window frames
Brackets / hooks
Radiators
Light shelving
UX universal plug
FUR universal plug
FBS concrete screw
Heavy
Load Application
Light
Recommended fischer products
Heavy shelving
Skirting boards
18
*SWL recommended safe working load in tension
Boilers
*SWL (Kg)
Dry Wall / stud batons
Examples of Suitable Applications
FIS V 360 S resin
HSS DRILL SET Ideal for drilling in: ▪ Bronze ▪ Hard brass ▪ Steel ▪ Stainless steel
OVERVIEW ▪ A straight shank, industrial quality twist drill. Gives good results in most metals, woods and plastics. A tough durable drill bit. Type
19 Piece HSS Drill Set
Art.-No.
contents x 1 each of the following sizes:
package type
14499
1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0
metal case
qty. per pack
1
Universal plug UX
The universal fixing for a perfect grip in all walls.
OVERVIEW Universal plug UX
Universal plug UX-R with collar
Wood screw
Chipboard screw
Suitable for: ▪ Concrete ▪ Prestressed hollow-core concrete slabs ▪ Natural stone with dense structure ▪ Solid brick ▪ Solid sand-lime brick ▪ Solid block made from lightweight concrete ▪ Aerated concrete ▪ Solid panel made from gypsum ▪ Vertically perforated brick ▪ Perforated sand-lime brick ▪ Hollow block made from lightweight concrete ▪ Slabs made of perforated bricks ▪ Hollow concrete blocks etc.
▪ Gypsum plasterboard and gypsum fibreboards ▪ Chip boards For fixing of: ▪ Pictures ▪ Motion detectors ▪ Lamps ▪ Skirting ▪ Electric switches ▪ Small wall-mounted shelves ▪ Towel rails ▪ Lightweight mirror cabinets ▪ Letter boxes ▪ Hanging baskets ▪ Curtain rails
DESCRIPTION ▪ Nylon universal fixing ▪ Expansion in solid building materials, reliable knot formation in all cavities. ▪ Use UX 6 long versions with fischer spacing screws for maximum load-bearing capacity in perforated materials, double-skinned plasterboard and for bridging non-loadbearing layers.
Advantages/Benefits
▪ The unique design enables use in almost all building materials. ▪ Diagonal connection ridges for optimum screw guidance. ▪ New saw-tooth anti-rotation lock prevents the fixing rotating in the drill hole. ▪ Low turning and high tightening torque - the first universal fixing that really “holds“.
▪ Can be used with wood and chipboard screws between 4 and 12 mm. ▪ Integral drive-in lock enables optimal push-through installation. If pre-assembled with screw. ▪ The collar of the UX R prevents it slipping into the drill hole.
INSTALLATION
Type of installation
Pre-positioned installation
▪ Pre-positioned and push-through installation.
Installation information
▪ With push-through installation, use the largest possible screw diameter. Push-through installation ▪ Drill only in a rotary motion (switch off hammer) in perforated and hollow brick and aerated concrete, and use a metal bit for plasterboard. ▪ If using hook screws and eye screws in cavity bricks, it is essential that they have a collar, so that the screw can be tightened enough to collapse the plug fully. ▪ The required screw length is given by the fixing length + thickness of the item being attached + 1 x screw diameter.
TECHNICAL DATA UX - without collar
Type
Art.-No.
UX 5 UX 5 R UX 6 x 35 UX 6 x 35 R UX 6 x 50 UX 6 x 50 R UX 8 x 50 UX 8 x 50 R UX 10 x 60 UX 10 x 60 R UX 12 x 70 UX 14 x 75
94721 94722 62754 62756 72094 72095 77869 77870 77871 77872 62758 62757
UX 6 x 35R S/20 UX 6 x 50R S/20 UX 8 x 50R S/15 UX 8 x 50R S/25 UX 10 x 60 S/20
94758 94759 94762 94760 94761
ID
UX R - with collar
drill-Ø
anchor length
usable length
chipboard screw
do
t
dp
l
da
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[Ø mm]
pcs.
5 5 6 6 6 6 8 8 10 10 12 14 6 6 8 8 10
40 40 45 45 60 60 60 60 75 75 85 95 60 75 70 80 85
9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 12,5 12,5 9,5 9,5 9,5 9,5 12,5
30 30 35 35 50 50 50 50 60 60 70 75 35 50 50 50 60
20 20 15 25 20
3-4 3-4 4-5 4-5 4-5 4-5 4,5 - 6 4,5 - 6 6-8 6-8 8 - 10 10 - 12 4.5 x 60 4,5 x 75 5 x 70 5 x 80 6 x 85
100 100 100 100 100 100 100 100 50 50 25 20 25 25 25 25 10
0 7 9 3 3 0 2 8 5 2 7 0 6 3 3 9 6
min. drill hole depth min. panel thickness
UX RS- with chipboard screw qty. per box
1 x screw-ø
LOADS Recom. loads Nrec [kN] and mean ultimate loads Nu [kN]. These values apply to the use of wood screws with the given screw diameter. When use chipboard screws these values should be reduced by 30%. Fixing type Wood screw diameter [mm] Substrate Concrete ≧ C12/C55 Solid brick ≧ Mz12 (DIN 105) Vertical perforated brick ≧ Hlz12 (ρ ≧ 1.0 kg/dm3, DIN 105) Sand-lime perforated brick ≧ KSL12 (DIN 106) Aerated concrete ≧ PB2 Aerated concrete ≧ PB4 Plasterboard 12,5 mm Plasterboard 2 x 12.5 mm Gypsum fibre board (Fermacell)
UX 6 x 35 5 Nrec Nu 0.4 2.4 0.2 2.0 0.2 0.9 0.4 2.6 0.05 0.4 0.2 1.0 0.1 0.5 0.15 0.7 0.2 1.5
UX 6 x 50 (R) 6 Nrec Nu 0.6 2.5 0.3 2.1 0.2 0.9 0.4 2.8 0.1 0.5 0.2 1.3 0.1 0.5 0.15 0.8 0.2 1.5
UX 8 x 50 5 Nrec Nu 0.6 2.5 0.3 2.1 0.2 1.0 0.5 3.2 0.15 0.7 0.3 1.7 0.1 0.6 0.15 0.8 0.2 1.7
UX 10 x 60 8 Nrec Nu 1.0 5.8 0.5 3.7 0.2 1.4 0.6 4.4 0.2 1.1 0.4 2.7 0.1 0.6 0.15 1.1 0.25 1.9
UX 12 x 70 10 Nrec Nu 1.5 8.8 0.7 8.0 0.3 2.1 0.8 5.0 0.2 1.6 0.6 3.7 – – – – – –
UX 14 x 75 12 Nrec Nu 1.8 13.2 0.8 8.0 0.4 3.2 0.8 5.0 0.2 1.7 0.7 3.9 – – – – – –
Universal frame fixing FUR The high-performance facade fixing - locks in each building material.
OVERVIEW FUR-T - fischer safety screw with countersunk head FUR 8-SS and FUR 10-SS fischer safety screw with hexagon-head FUR 10 and FUR 14 F US fischer safety screw with hexagon-head
Approved for: ▪ ▪ ▪ ▪ ▪
Concrete Solid brick Solid sand-lime brick Vertically perforated brick Perforated sand-lime block ▪ Hollow block made from lightweight concrete ▪ No-fines lightweight concrete ▪ Multilayer composite concrete wall
Also suitable for:
▪ Natural stone with dense structure ▪ Solid block made from lightweight concrete ▪ Solid panel made from gypsum ▪ Aerated concrete
DESCRIPTION ▪ Universal frame fixing. ▪ Anchorage in solid materials by means of friction locking. ▪ The asymmetrical close set teeth expand and formlock in hollow materials. ▪ Fixing sets with A4 stainless steel safety screws can for applications in damp conditions.
Advantages/benefits ▪ Universal for all building materials. ▪ All the fixings with preinstalled screw.
▪ Patented asymmetrical teeth guarantee high load-bearing capacity in solid and perforated brick. ▪ Integral hammer-in stop prevents the fixing from spreading prematurely during installation. ▪ The FUR-FUS version does not require additional washers and prevents contact corrosion. ▪ Large range for wood and metal constructions (internal and exterior) for many applications.
INSTALLATION
Type of installation
▪ Push-through installation
Installation tips
▪ We advise countersunk-head screws for fixing wooden structures, and fixings with a flat edge and hexagon-head bolts for metal structures. ▪ The hexagon-head with integral washer also has an integral g̃ -socket. ▪ With vertically perforated bricks only use rotary drilling (no impact drilling).
For fixing of:
▪ Facade and roof substructures made of wood and metal ▪ Gates ▪ Door frames ▪ Fire protection doors ▪ Windows ▪ Kitchen cabinets ▪ Wardrobes ▪ Squared timbers ▪ Facings
Universal frame fixing FUR TECHNICAL DATA FUR-T - fischer safety screw with countersunk head Type
Art.-No.
ID approvals
DIBt
FUR 8 x 80 T FUR 8 x 100 T FUR 8 x 120 T FUR 10 x 80 T FUR 10 x 100 T FUR 10 x 115 T FUR 10 x 135 T FUR 10 x 160 T FUR 10 x 185 T FUR 10 x 200 T FUR 10 x 230 T FUR 14 x 100 T FUR 14 x 140 T FUR 14 x 165 T FUR 14 x 180 T FUR 14 x 210 T FUR 14 x 240 T FUR 14 x 270 T FUR 14 x 300 T FUR 14 x 330 T FUR 14 x 360 T FUR 8 x 80 T A4 FUR 8 x 100 T A4 FUR 8 x 120 T A4 FUR 10 x 80 T A4 FUR 10 x 100 T A4 FUR 10 x 115 T A4 FUR 10 x 135 T A4 FUR 10 x 160 T A4 FUR 10 x 185 T A4 FUR 10 x 200 T A4 FUR 10 x 230 T A4 FUR 14 x 140 T A4 FUR 14 x 165 T A4 FUR 14 x 180 T A4 FUR 14 x 210 T A4
70110 70111 70112 88756 88757 88760 88758 88759 88761 88764 88762 48711 48712 48713 48714 48844 48715 48716 90759 90760 90761 70120 70121 70122 88784 88785 88791 88786 88787 88788 88789 88790 48719 48720 48721 48845
2 9 6 1 8 8 5 2 5 6 2 2 9 6 3 7 0 7 7 3 0 1 8 5 4 1 2 8 5 2 9 5 8 4 1 4
For matching cover caps ADT, see page 158.
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
FUR-T A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
fischer safety screw
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10 10 10 10 14 14 14 14 14 14 14 14 14 14 8 8 8 10 10 10 10 10 10 10 10 14 14 14 14
90 110 130 90 110 125 145 170 195 210 240 115 155 180 195 225 255 285 315 345 375 90 110 130 90 110 125 145 170 195 210 240 155 180 195 225
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 120 80 100 115 135 160 185 200 230 100 140 165 180 210 240 270 300 330 360 80 100 120 80 100 115 135 160 185 200 230 140 165 180 210
10 30 50 10 30 45 65 90 115 130 160 30 70 95 110 140 170 200 230 260 290 10 30 50 10 30 45 65 90 115 130 160 70 95 110 140
6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280 10 x 310 10 x 340 10 x 370 6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 10 x 150 10 x 175 10 x 190 10 x 220
drive
qty. per box
pcs.
T30 T30 T30 T40 T40 T40 T40 T40 T40 T40 T40 T50 T50 T50 T50 T50 T50 T50 T50 T50 T50 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40 T40 T50 T50 T50 T50
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
TECHNICAL DATA FUR 8-SS and FUR 10-SS - fischer safety screw with hexagon-head Type
Art.-No.
ID approvals
DIBt
70130 70131 70132 88776 88777 88783 88778 88779 88780 88781 88782 70140 70141 88792 88793 88799 88794 88795 88796 88797 88798
FUR 8 x 80 SS FUR 8 x 100 SS FUR 8 x 120 SS FUR 10 x 80 SS FUR 10 x 100 SS FUR 10 x 115 SS FUR 10 x 135 SS FUR 10 x 160 SS FUR 10 x 185 SS FUR 10 x 200 SS FUR 10 x 230 SS FUR 8 x 80 SS A4 FUR 8 x 100 SS A4 FUR 10 x 80 SS A4 FUR 10 x 100 SS A4 FUR 10 x 115 SS A4 FUR 10 x 135 SS A4 FUR 10 x 160 SS A4 FUR 10 x 185 SS A4 FUR 10 x 200 SS A4 FUR 10 x 230 SS A4
0 7 4 9 6 7 3 0 6 3 0 9 6 9 6 8 3 0 7 4 1
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
FUR-SS A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10
90 110 130 90 110 125 145 170 195 210 240 90 110 90 110 125 145 170 195 210 240
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 120 80 100 115 135 160 185 200 230 80 100 80 100 115 135 160 185 200 230
10 30 50 10 30 45 65 90 115 130 160 10 30 10 30 45 65 90 115 130 160
6 x 85 6 x 105 6 x 125 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235 6 x 85 6 x 105 7 x 85 7 x 105 7 x 120 7 x 140 7 x 165 7 x 190 7 x 205 7 x 235
FUR 14 FUS - fischer safety screw with hexagon-head Type
Art.-No.
ID approvals
DIBt
FUR 10 x 80 FUS FUR 10 x 100 FUS FUR 14 x 80 FUS FUR 14 x 100 FUS FUR 14 x 140 FUS FUR 14 x 165 FUS FUR 14 x 180 FUS FUR 14 x 210 FUS FUR 14 x 240 FUS FUR 14 x 270 FUS FUR 14 x 300 US FUR 14 x 330 US FUR 14 x 360 US FUR 10 x 80 FUS A4 FUR 14 x 80 FUS A4 FUR 14 x 100 FUS A4 FUR 14 x 140 FUS A4 FUR 14 x 165 FUS A4 FUR 14 x 180 FUS A4 FUR 14 x 210 FUS A4 FUR 14 x 240 FUS A4 FUR 14 x 270 FUS A4
3) 4) 3) 4) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 3) 4) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2) 1) 2)
93527 97797 48724 48725 48726 48727 48728 48842 48729 48730 90762 90763 90764 93528 48731 48732 48733 48734 48735 48843 48736 48737
9 2 2 9 6 3 0 3 7 3 7 4 1 6 0 7 4 1 8 0 5 2
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
1) Collar: Ø 26 x 3 mm. 2) Additional Bit T50 is integrated into the hexagon head. 3) Collar: Ø 18 x 2 mm. 4) Additional Bit T40 is integrated into the hexagon head.
fischer safety width across nut qty. per box screw
drill-Ø
SW pcs.
SW10 SW10 SW10 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW10 SW10 SW13 SW13 SW13 SW13 SW13 SW13 SW13 SW13
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
FUR-FUS A4 - with stainless steel A4 fischer safety screw
min. drill-hole effect. anchorage anchor length depth for through depth fixings
max. usable length
fischer safety width across nut qty. per box screw
do
td
hef
l
t fix
ds x ls
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
10 10 14 14 14 14 14 14 14 14 14 14 14 10 14 14 14 14 14 14 14 14
90 80 95 115 155 180 195 225 255 285 315 345 375 90 95 115 155 180 195 225 255 285
70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70
80 100 80 100 140 165 180 210 240 270 300 330 360 80 80 100 140 165 180 210 240 270
10 30 10 30 70 95 110 140 170 200 225 255 285 10 10 30 70 95 110 140 170 200
7 x 85 7 x 105 10 x 90 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280 10 x 305 10 x 335 10 x 365 7 x 85 10 x 90 10 x 110 10 x 150 10 x 175 10 x 190 10 x 220 10 x 250 10 x 280
SW pcs.
SW13 SW13 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW13 SW17 SW17 SW17 SW17 SW17 SW17 SW17 SW17
50 50 50 50 50 50 50 50 50 50 20 20 20 50 50 50 50 50 50 50 50 50
LOADS Recommended loads Nrec 1) [kN] and mean ultimate loads Nu [kN] with large axial spacing and edge distance Fixing type Substrate Concrete ≧ C12/15 Solid brick ≧ Mz12 (DIN 105) Solid sand lime brick ≧ KS12 (DIN 106) Vertical perforated brick ≧ Hlz12 (ρ≧1.0 kg/dm³, DIN 105) Perforated sand lime brick ≧ KSL12 (DIN 106) Hollow block ≧ Hbl2 (lightweight concrete, DIN 18151) 3) Solid block ≧ V2 (lightweight concrete, DIN 18152)
FUR 8 [kN] [kN] [kN] [kN] [kN] [kN] [kN]
Nrec1) 1.2 0.7 1.1 0.13 0.63 0.17 0.56
FUR 10 Nu 8.1 5.0 7.8 0.9 4.4 1.2 3.9
Nrec1) 2.1 1.4 1.6 0.37 0.48 0.46 0.71
FUR 14 Nu 10.0 10.0 12.8 2.6 3.3 3.2 5.0
1) Safety factor for the material (γM) and for the load (γL) included. 2) Due to large range of scatter of test results not suitable, the failure of the substrate varies so greatly that no reproducible values can be given. 3) The expanding part of the fixing must anchor in the wall of the brick.
Nrec1) 3.1 1.8 2.8 0.5 0.6 0.31 0.5
Nu 21.9 12.5 19.7 2) 2)
2.2 2)
Concrete screw FBS
The simple and time-saving threaded concrete screw for the cracked or tension zone.
OVERVIEW Concrete screw FBS-P, panhead
Concrete screw FBS-SK, countersunk head Concrete screw FBS-US, hexagon head with integrated washer Concrete screw FBS-S, hexagon head Concrete screw FBS-M8, outside diameter M8 Concrete screw FBS-M8/M10, internal thread M8/M10
FBS M12 Concrete screw with thread and hexagon drive, stainless steel
DESCRIPTION ▪ Self-tapping concrete screw for push-through and prior insertion installation ▪ When the concrete screw is screwed into the hole, the thread taps into the concrete and creates a positive fit anchorage. ▪ A4 stainless steel version for outdoor use or in damp conditions.
Advantages/benefits
▪ Setting and installation in one working operation saves time. ▪ Completely removable anchor, therefore particularly suitable for temporary fixings (e.g. shuttering supports). ▪ Virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances. ▪ Serrations on the thread makes the screws easy to screw in. ▪ Re-usability of the screws reduces costs. ▪ Fixing with different head designs for different areas of
Approved for: ▪ Cracked and non-cracked concrete C20/25 to C50/60 ▪ Lightweight ceilings and suspended ceilings according to DIN 18168 ▪ Statically comparable fixings Also suitable for: ▪ Concrete C12/15 ▪ Natural stone with dense structure ▪ Solid brick, ▪ Solid sand-lime brick For fixing of: ▪ Handrails ▪ Consoles ▪ Ladders ▪ Cable trays ▪ Machines ▪ Gates ▪ Facades ▪ Window elements ▪ Battens
▪ ▪ ▪ ▪ ▪ ▪ ▪
Metal profiles Wire hangers Chains Cables Punched tapes Ventilation pipes Substructures made of wood and metal ▪ Ceilings
INSTALLATION
Type of installation
▪ Pre-positioned installation ▪ Push-through installation
Installation tips
▪ We recommend use of an impact wrench with tangential impact (see the table for power output).
Performance details of impact wrench Concrete screw FBS 5 FBS 6 FBS 8 FBS 10
recommended installation torque 100 [Nm] 200 [Nm] 300 [Nm]
Use nuts (black) which fit percussion power screwdrivers!
TECHNICAL DATA Concrete screw FBS-P panhead, zinc-plated steel Type
Art.-No.
ID
approval DIBt
FBS 5/5 P FBS 6/5 SK FBS 6/5 P FBS 6/25 P
66774 66935 66939 66948
3 8 6 8
▯ ▯ ▯ ▯
drill-Ø
drill-hole diameter in object
Concrete screw FBS-SK countersunk head, zinc-plated steel screw diameter
drill hole depth anchorage depth
do
df
ds
h0
hef
t fix
[mm]
[Ø mm]
[mm]
[mm]
[mm]
[mm]
5 6 6 6
7 8 8 8
6,5 7,6 7,6 7,6
65 65 65 65
55 55 55 55
5 5 5 25
Concrete screw FBS-M8, outside diameter M8, zinc-plated steel Type
Art.-No.
ID
approval
DIBt
FBS 6 M8 FBS 6 M8/M10I
66949 66950
5 1
▯ ▯
drill-Ø
Art.-No.
ID
approval
drill-hole diameter in object
screw diameter
min. drill-hole anchorage depth depth for through fixings
do
df
ds
td
hef
[mm]
[Ø mm]
[mm]
[mm]
[mm]
6 6
8 8
7,6 7,6
60 60
55 55
DIBt
FBS 8/5 US FBS 8/25 US FBS 8/15 S FBS 10/5 S FBS 10/15 S FBS 10/25 S
66956 66957 66958 67062 67063 67168
FBS 10/10 S A4 FBS 10/20 S A4
67169 98336
3 0 7 0 7 9 6 2
▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
drill-Ø
actuation
qty. per box
T30 T30 T30 T30
100 100 100 100
pcs.
Concrete screw FBS-M8/M10, internal thread M8/M10, zinc-plated steel
Concrete screw FBS-US, hexagon head with integrated washe Type
max. usable length
drill-hole diameter in object
thread
width across nut qty. per box
M
SW
M8 M8
SW10 SW13
pcs.
100 100
Concrete screw FBS-S, hexagon head screw diameter
drill hole depth anchorage depth
max. usable length
do
df
ds
h0
hef
t fix
[mm]
[Ø mm]
[mm]
[mm]
[mm]
[mm]
8 8 8 10 10 10 10 10
12 12 12 14 14 14 14 14
10,5 10,5 10,5 12,5 12,5 12,5 12,5 12,5
90 110 100 100 110 120 105 115
75 75 75 85 85 85 85 85
5 25 15 5 15 25 10 20
actuation
qty. per box
T40/SW13 T40/SW13 SW 16 SW 18 SW 18 SW 18 SW 17 SW 17
100 100 100 50 50 50 50 50
pcs.
Concrete screw FBS TECHNICAL DATA FBS M12 Concrete screw with thread and hexagon drive, zinc-plated steel Type
FBS 10 M12/30 FBS 10 M12/53 FBS 10 M12/40 A4 FBS 10 M12/60 A4
1) 1) 1) 1)
Art.-No. ID approval
drill-Ø
DIBt
do [mm] 10 10 10 10
3 9 9 9
98339 98340 98337 98338
▯ ▯ ▯ ▯
drill-hole screw diameter in diameter object df ds [Ø mm] [mm] 14 12,5 14 12,5 14 12,5 14 12,5
FBS M12 A4 Concrete screw with thread and hexagon drive, stainless steel drill hole anchorage max. usable depth depth length h0 [mm] 125 148 135 155
hef [mm] 85 85 85 85
t fix [mm] 30 53 40 60
thread
width qty. per box across nut
M
SW
M 12 M 12 M 12 M 12
9 9 9 9
pcs. 50 50 50 50
1) Including nuts and washer, not pre-assembled.
LOADS Design resistant and recommended loads for single anchors of fischer Concrete screw FBS with large axial spacing and edge distance Anchor size Effective anchorage depth Drill hole depth Screw in depth Drill hole diameter Design resistant loads NRd and VRd [kN]
hef h0 ≧ hnom ≧ d0
[mm] [mm] [mm] [mm]
Non-cracked concrete FBS 8 FBS 10 50 60 85 95 75 85 8 10
FBS 5* 55 60 55 5
Cracked concrete FBS 6* FBS 8* 55 50 60 85 55 75 6 8
FBS 10 60 95 85 10
gvz A4 gvz [kN] A4
7.2 – 10.3 –
9.0 9.0 16.9 19.0
0.4 – – –
1.1 – – –
3.4 – 10.4 –
5.4 5.4 16.9 17.6
gvz A4 gvz [kN] A4
5.1 – 7.4 –
6.4 6.4 12.1 13.6
0.3 – – –
0.8 – – –
2.4 – 7.4 –
3.9 3.9 12.1 12.6
gvz 19.0 A4 – Component dimensions, minimum axial spacings and edge distances Min. axial spacing1) smin [mm] 50 Min. edge distance1) cmin [mm] 70 Min. structural component thickness hmin [mm] 120
40.0 36.8
– –
8.0 –
19.0 –
40.0 36.8
60 65 130
50 100 110
50 100 110
50 70 120
60 65 130
Tensile
0°
NRd [kN]
Shear
90°
VRd
Tensile
0°
Nrec [kN]
Shear
90°
Vrec
Recommended loads Nrec and Vrec [kN]
Recommended bending moment Mrec [Nm] Mrec [Nm]
* For the fixing of lightweight suspended ceiling constructions only. 1) For min. axial spacing and min. edge distance the above described loads have to be reduced! (See design software “CC-Compufix”) All load values apply for concrete C20/25 without edge or spacing influence. Design resistant loads: material safety factor γM is included. Material safety factor γM depends on type of anchor. Recommended loads: material safety factor γM and safety factor for load γL = 1.4 are included. The conditions of application differ from those given in the German Approval. For further detailed information about approvals please contact your local fischer representative.
Injection mortar FIS V
The high-performance hybrid mortar in the shuttle cartridge.
OVERVIEW Injection mortar FIS V 360 S, styrene free
Static mixer FIS S
Injection mortar FIS VS 150C, styrene free
Can be extruded using a standard silicone gun
Approvals: ▪ European Technical Approval Option 7 in conjunction with Threaded rods FIS A resp. RG M for non-cracked concrete. ▪ German approval (DIBt) in conjunction with injection anchor sleeve FIS H M and injection anchor parts FIS G and FIS E for solid and hollow bricks (solid brick also without anchor sleeve). ▪ German approval (DIBt) for aerated cement in conjunction with cone drill PBB, centering sleeve PBZ and Threaded rod FIS G. ▪ German approval (DIBt) for reinforcement bars. ▪ German approval (DIBt) for Remedial wall tie VBS 8. ▪ German approval (DIBt) for Weather facing renovation system FWS. ▪ ICC-Approval for threaded rods and rebars
For fixing of: ▪ Steel constructions ▪ Railings ▪ Hand-rails ▪ Consoles ▪ Ladders ▪ Machines ▪ Cable trays ▪ Staircases ▪ Gates ▪ Facades ▪ Window elements ▪ High racks ▪ Canopies ▪ Stand-off installations
DESCRIPTION ▪ Styrene-free, quick-curing high-performance hybrid mortar (contains vinyl ester resin and cement). ▪ Resin and cement as well as water and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer. ▪ Partially-used cartridges can easily be reused by changing the static mixer.
Advantages/Benefits
▪ High-performance hybrid mortar for highest loads in almost all building materials. ▪ Universal fixing system for a broad range of applications on building sites. ▪ Expansion-free anchoring allows low axial spacings and edge distances. ▪ Extensive range of accessories for a wide variety of applications. ▪ Ergonomic injection guns for quick and easy installation. ▪ A variety of approvals cover many applications in nearly all building material and guarantee maximum safety. ▪ First injection system world-wide with approvals for concrete, reinforcement bars, solid bricks, perforated bricks and aircrete.
Accessories / Recommended loads ▪ ▪ ▪ ▪ ▪
For fixing in concrete For fixing in masonry For fixing in aerated concrete For reinforcement bars Appropriate injection guns
TECHNICAL DATA Injection mortar FIS V 360 S, styrene free Type
Art.-No. ID
approvals
contents
languages on the lable
shelf life
qty. per box
months
pcs.
-
18
6
-
18
6
-
-
10
DIBt ■ ETA
FIS V 360 S
94405 9
FIS VS 150C
45303 2
FIS S
61223 1
▯
■
1 cartridge 360 ml + 2 static mixers 1 cartridge 154ml + 2 static mixers 10 static mixer FIS V 360 S
CURING TIME Gelling and curing time of fischer FIS V Cartridge temperature (mortar)
+ 5°C — + 10°C + 10°C — + 20°C + 20°C — + 30°C + 30°C — + 40°C
Gelling time
13 min. 5 min. 4 min. 2 min.
Temperature at anchoring base - 5°C — ± 0°C ± 0°C — + 5°C + 5°C — + 10°C + 10°C — + 20°C + 20°C — + 30°C + 30°C — + 40°C
Curing time 24 hrs. 3 hrs. 90 min. 60 min. 45 min. 35 min.
The above times apply from the moment of contact between resin and hardener in the static mixer. For installation, the cartridge temperature must be at least +5°C. For longer installation times, i.e. when interruptions occur in work, the mixer should be replaced.
Resin Accessories OVERVIEW Internally threaded sockets FIS E Internally threaded sockets FIS M I
Approval:
▪ German approval (DIBt) in conjunction with Injection mortar FIS V, and FIS G FIS E for solid and hollow material
With anchor sleeve suitable for: Injection anchor sleeve, plastic FIS H K
Injection anchor sleeve with net FIS H N Injection anchor sleeve, 1 m length FIS H L
▪ ▪ ▪ ▪ ▪ ▪ ▪
Vertically perforated bricks Perforated sand-lime brick Hollow blocks Solid brick Solid sand-lime brick Hollow pumice plank Slabs made of perforated bricks and other perforated blocks
Without anchor sleeve suitable for: ▪ ▪ ▪ ▪
Lightweight concrete Solid bick Solid sand-lime bricks Full pumice stone and other solid building materials ▪ Aerated concrete
For fixing of: ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Machines Gratings Gates Hand-rails Consoles Pipelines Sanitary equipment Cable trays Facades Awnings Canopies Wooden constructions
DESCRIPTION ▪ Injection anchor sleeves, threaded rods and internallythreaded sockets, specially for use with Injection mortars FIS V, FIS VS, FIS VT or FIS P in masonry materials. ▪ The anchor sleeve saves mortar in hollow materials and centres the anchor in the drill hole. ▪ In solid building materials the anchor sleeves are not required. ▪ In solid building materials, the injection mortar bonds the entire surface of the anchor rod / internally-threaded sockets to the wall of the drilled hole. ▪ With hollow materials the mortar adapts to the anchoring substrate and bears the load primarily through a mechanical interlock. ▪ Threaded rod FIS G made of A4 stainless steel for outdoor use and in damp conditions.
▪ Expansion-free fixing allows small axial spacings and edge distances. ▪ Extensive range for various cost-efficient applications. ▪ The mortar largely seals the drill-hole.
Advantages/Benefits
▪ High-performance mortars allow high loads in all building materials. ▪ Approval covers common masonry materials for maximum safety.
INSTALLATION in perforated brick with anchor sleeve
Type of Installation
▪ Pre-positioned installation
Installation information
▪ In solid building materials the drill hole must be cleaned thoroughly (blow out 2 x, brush out 2x, blow out 2 x).
in solid materials without anchor sleeve
TECHNICAL DATA Injection anchor sleeve, metal FIS H M Type
Art.-No.
ID
approval
DIBt
FIS H 16 x 75 M FIS H 16 x 100 M FIS H 20 x 75 M FIS H 20 x 100 M FIS H 20 x 200 M
58068 48270 15371 49001 48271
4 4 0 3 1
▯ ▯ ▯ ▯
drill-Ø
min. drill hole depth Min. anchorage depth anchor
Min. anchorage depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
16 16 20 20 20
90 105 90 105 210
82 102 82 102 200
75 95 75 95 200
No. of scale divisions on cartridge
fits
10 15 15 19 40
M8 - M10 M8 - M10 M12 - M14 M12 - M14 M12 - M14
qty. per box
pcs.
10 10 20 10 10
TECHNICAL DATA Injection anchor sleeve with net FIS H N Type
Art.-No.
50470 50472 50474
FIS H 16 x 85 N FIS H 18 x 85 N FIS H 20 x 85 N
ID
3 7 1
drill-Ø
min. drill hole Min. anchorage Min. anchorage depth depth anchor depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
16 18 20
95 95 95
90 90 90
85 85 85
No. of scale divisions on cartridge
fits
qty. per box
15 17 19
Ø8/M8 Ø10/M10/FIS 18/M8 I Ø12/M12/FIS 20/M10 I
20 20 20
No. of scale divisions on cartridge
fits
qty. per box
6 9 7 10 11 12
Ø4/M4 - Ø8/M8 Ø4/M4 - Ø8/M8 Ø6/M6 - Ø10/M10 Ø6/M6 - Ø10/M10 Ø8/M8 - Ø12/M12 Ø8/M8 - Ø12/M12
20 20 10 10 10 10
fits
qty. per box
pcs.
Injection anchor sleeve, plastic FIS H K Type
FIS H 12 x 60 K FIS H 12 x 80 K FIS H 14 x 70 K FIS H 14 x 90 K FIS H 16 x 80 K FIS H 16 x 100 K
Art.-No.
1) 1) 1)
50432 58045 50436 58046 50433 58047
ID
1 5 9 2 8 9
drill-Ø
min. drill hole Min. anchorage Min. anchorage depth depth anchor depth sleeve
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
12 12 14 14 16 16
70 90 80 100 90 110
60 80 70 90 80 100
60 80 70 90 80 100
pcs.
1) Anchor sleeve with up to 20mm plaster bridging.
Injection anchor sleeve, plastic FIS H K Type
FIS H 12 x 50 K FIS H 12 x 85 K FIS H 16 x 85 M FIS H 16 x 130 M FIS H 20 x 85 M
Art.-No.
41900 41901 41902 41903 41904
ID
7 4 1 8 5
drill-Ø
min. drill hole Min. anchorage Min. anchorage No. of depth depth anchor depth sleeve scale divisions on cartridge
do
t
hv
hv
[mm]
[mm]
[mm]
[mm]
12 12 16 16 20
60 95 95 140 95
-
-
pcs.
5 10 12 15 15
-
50 50 50 50 50
Injection anchor sleeve, 1 m length FIS H L Type
FIS H 12 x 1000 L FIS H 16 x 1000 L FIS H 22 x 1000 L
Art.-No.
50598 50599 45301
ID
4 1 8
drill-Ø
total length
do
l
[mm]
[mm]
12 16 22
1000 1000 1000
fits
qty. per box
pcs.
Ø6 / M 6 - Ø8 / M 8 Ø10/M10 Ø12/M12 - Ø16/M16
10 10 6
TECHNICAL DATA FIS brush Ø 14/20 mm
Type
FIS-brush Ø14/20 mm FIS-brush Ø20/30 mm
FIS brush Ø 20/30 mm
Art.-No.
ID
qty. per box
48980 48981
2 9
2 2
Internally threaded sockets FIS M I Type
Art.-No.
ID
approval ▯ DIBt
FIS 18/M8 I FIS 20/M10I
50480 50481
FIS E 11 x 75 M8 FIS E 15 x 75 M10 FIS E 15 x 75 M12
58069 16248 16249
2 9 1 4 1
▯ ▯ ▯ ▯ ▯
effect. anchorage depth
Internally threaded sockets FIS E min. bolt penetration
max. bolt penetration
internal thread ds
hef
e2
e1
[mm]
[mm]
[mm]
85 85 75 75 75
8 10 8 10 12
23 28 60 60 60
fits
qty. per box
pcs.
M8 M 10 M8 M 10 M 12
FIS H 18 x 85 N FIS H 20 x 85 N FIS H 20 x 75 M FIS H 20 x 75 M FIS H 20 x 75 M
20 20 20 20 20
CORRECT USE WITHOUT ANCHOR SLEEVE
Suitable for: Lightweight concrete, solid brick, solid sand-lime brick, solid pumice and other solid materials Type
Dimension Approval Usable length tfix [mm] Drill diameter d0 [mm] Drill depth td [mm] Suitable brush-∅ [mm] Anchoring depth hef [mm] No. of scale units
Approved for: Solid bricks ≧ Mz 12, solid sand-lime bricks ≧ KS 12.
Injection threaded rod FIS G M...
Internally threaded sockets FIS E...
8 x 100 8 x 125 8 x 125 10 x 95 10 x 110 10 x 145 12 x 105 12 x 130 12 x 150 11 x 75 15 x 75 15 x 75 M8 M10 M12 15 40 20 10 25 40 15 40 40 — — — 10 10 10 12 12 12 14 14 14 14 18 18 80 80 80 90 90 90 110 110 110 90 90 90 14 14 14 14 14 14 20 20 20 20 20 20 75 75 95 75 75 95 75 75 95 75 75 75 3 3 4 4 4 5 5 5 7 4 4 4
1) With detachable plaster bridging. Included in German approval.
Screw-inserts FIS E...K
5 x 45 12 x 100 6 x 75 1) 8 x 85 1) 10 x 95 1)
— 10 45 14 45 2
— 18 100 20 100 7
— 10 60 14 60 3
— 14 70 20 70 4
— 14 80 20 80 5
