Fitting Instructions AWS
Fitting Instructions 1. Remove rubber seal from aluminium. Check width between outside faces of the doorframe rebate and cut aluminium section to this size (see illustration).
Aluminium Section Cut to this length
2. Cut rubber seal to length of aluminium and reinsert into groove. Pinch one end of seal groove to retain seal in place. 3. With door in closed position place the excluder flat against the face of the door with the seal touching floor to provide a weather tight seal. Mark fixing points and screw into place.
Lockside of Door Frame
Grey Fixing Button
4. Fix the grey button and screw provided to the lockside of the doorframe (see illustration above).
40mm 48mm
up to 25mm
Exitex Ltd Dundalk Ireland T: (+353 42) 9371244 Email: [email protected] www.exitex.com
Aluminium Section Cut to this length
2. Cut rubber seal to length of aluminium and reinsert into groove. Pinch one end of seal groove to retain seal in place. 3. With door in closed position place the excluder flat against the face of the door with the seal touching floor to provide a weather tight seal. Mark fixing points and screw into place.
Lockside of Door Frame
Grey Fixing Button
4. Fix the grey button and screw provided to the lockside of the doorframe (see illustration above).
40mm 48mm
up to 25mm
Exitex Ltd Dundalk Ireland T: (+353 42) 9371244 Email: [email protected] www.exitex.com
