Flow meter for AdBlue®
Flow meter for AdBlue
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de [email protected]
®
RCDL series Plastic model with LCR register The Recordall® series is a positive displacement meter. The series is best suited for metering fluids up to a viscosity of 700 mPas and at an operating temperature of 50°C up to 120°C.
AdBlue®
Features • • • • •
Magnetic coupling Compatible with many liquids Wide flow range Low pressure loss Low weight
The ultra pure 32,5% urea solution, also known under the name of AdBlue®, is the basis for the reduction of toxic nitric oxides in exhaust gases from diesel operated goods vehicles. Those nitric oxides are getting reduced to water and nitrogen, which is one of air´s main element. AdBlue® is made synthetically. The high purity and quality are DIN V 70070 certified. AdBlue® is not an additive, it is carried along to a separate tank system in diesel vehicles equipped with SCR-technique. AdBlue® can be metered with a Recordall® RCDL M25 or M40, plastic version, PPO with Viton® or EPDM o-ring and can be combined with all Badger Meter registers.
LM OG-I-PVC Features
Oval gear meters The electronic register module contains a microprocessor board powered by a lithium battery with an expected life of 3 to 5 years depending on use. It can be programmed to dispense in pints, quarts, liters, or gallons and will totalize in liters or gallons. A calibration factor and unit of measure are programmed during factory test. Unlike mechanical meters, these units can be electronically recalibrated in the field when necessary. A 5digit liquid crystal display, accurate to the second decimal place, shows the exact amount of fluid dispensed. The entire register module is protected from the wear and tear of normal shop use by a rugged, glass filled, shock resistant, nylon housing.
• • • • • • • • • • • • • •
Leakproof, magnetic drive Large LCD Display Two decimal point precision Push button calibration Totalization in gallons or liters Delivery in pints, quarts, liters or gallons Only two parts to reduce maintenance costs Accuracy to ±0,5 Minimum three year battery life Low battery indicator Replaceable battery Battery shelf life – 10 years Humidity and moisure resistant register Not for use in Ex-zone
IND_RCDL_AdBlue_DB_02_0809.doc Reprint of texts or text extracts requires prior written authorization of Badger Meter Europa GmbH. Misuse of texts, pictures or company logo will be prosecuted.
LM OG-TI-PVC Features • • • •
Does not require external power Rugged, corrosion resistant plastic enclosure Watertight, NEMA 4X housing Compatible with most flow controllers and counters with scaling capabilities • Humidity and moisture resistant transmitter • Maximum operating pressure – 10 bar (145 psi) • For use in Ex-zone 1 (with suitable driven)
Pulse transmitter The transmitter, mounted on the meter, can be wired to batch controllers, remote counters and other electronically operated instruments that can accept pulses from a reed switch, and have scaling capabilities. The oval gear transmitter is contained in a glass filled plastic housing with a NEMA 4X rating. Type Size DN Nominal pressure PN Max. temperature (PPO) Max. temperature (Vectra) Flow range l/min (PPO) Accuracy (1:10) Accuracy (flow range) Weight Materials Housing Measuring chamber O -rings Retainer strap (PPO) Bottom (PPO) Bottom / axial Magnet Crossbar Thrust roller Roller insert Internal gears
M 25
M 40
LM OG-I-PVC
LM OG-TI PVC
Plastic 15 / 20 16 50°C 1 – 100
Plastic 25 16 50°C 2 – 160
10 50°C 0.5 - 35
10 50°C 0,5 - 35
1,2 kg
1,8 kg
1.0 kg
Nylon PPO
Polykarbonat PPO
PVC -
±0,5 % ±1,5 %
±0,5 %
Viton Nylon Nylon -
0.9 kg
PVC Glass filled nylon Viton
Polykarbonat -
Barium ferrit Nylon Nylon Stainless steel 316 S/S -
SCR technology
IND_RCDL_AdBlue_DB_02_0809.doc Reprint of texts or text extracts requires prior written authorization of Badger Meter Europa GmbH. Misuse of texts, pictures or company logo will be prosecuted.
SS 1.4301 LCP – Plastic (Vectra)
LCP (Liquid Crystal Polymer)
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de [email protected]
®
RCDL series Plastic model with LCR register The Recordall® series is a positive displacement meter. The series is best suited for metering fluids up to a viscosity of 700 mPas and at an operating temperature of 50°C up to 120°C.
AdBlue®
Features • • • • •
Magnetic coupling Compatible with many liquids Wide flow range Low pressure loss Low weight
The ultra pure 32,5% urea solution, also known under the name of AdBlue®, is the basis for the reduction of toxic nitric oxides in exhaust gases from diesel operated goods vehicles. Those nitric oxides are getting reduced to water and nitrogen, which is one of air´s main element. AdBlue® is made synthetically. The high purity and quality are DIN V 70070 certified. AdBlue® is not an additive, it is carried along to a separate tank system in diesel vehicles equipped with SCR-technique. AdBlue® can be metered with a Recordall® RCDL M25 or M40, plastic version, PPO with Viton® or EPDM o-ring and can be combined with all Badger Meter registers.
LM OG-I-PVC Features
Oval gear meters The electronic register module contains a microprocessor board powered by a lithium battery with an expected life of 3 to 5 years depending on use. It can be programmed to dispense in pints, quarts, liters, or gallons and will totalize in liters or gallons. A calibration factor and unit of measure are programmed during factory test. Unlike mechanical meters, these units can be electronically recalibrated in the field when necessary. A 5digit liquid crystal display, accurate to the second decimal place, shows the exact amount of fluid dispensed. The entire register module is protected from the wear and tear of normal shop use by a rugged, glass filled, shock resistant, nylon housing.
• • • • • • • • • • • • • •
Leakproof, magnetic drive Large LCD Display Two decimal point precision Push button calibration Totalization in gallons or liters Delivery in pints, quarts, liters or gallons Only two parts to reduce maintenance costs Accuracy to ±0,5 Minimum three year battery life Low battery indicator Replaceable battery Battery shelf life – 10 years Humidity and moisure resistant register Not for use in Ex-zone
IND_RCDL_AdBlue_DB_02_0809.doc Reprint of texts or text extracts requires prior written authorization of Badger Meter Europa GmbH. Misuse of texts, pictures or company logo will be prosecuted.
LM OG-TI-PVC Features • • • •
Does not require external power Rugged, corrosion resistant plastic enclosure Watertight, NEMA 4X housing Compatible with most flow controllers and counters with scaling capabilities • Humidity and moisture resistant transmitter • Maximum operating pressure – 10 bar (145 psi) • For use in Ex-zone 1 (with suitable driven)
Pulse transmitter The transmitter, mounted on the meter, can be wired to batch controllers, remote counters and other electronically operated instruments that can accept pulses from a reed switch, and have scaling capabilities. The oval gear transmitter is contained in a glass filled plastic housing with a NEMA 4X rating. Type Size DN Nominal pressure PN Max. temperature (PPO) Max. temperature (Vectra) Flow range l/min (PPO) Accuracy (1:10) Accuracy (flow range) Weight Materials Housing Measuring chamber O -rings Retainer strap (PPO) Bottom (PPO) Bottom / axial Magnet Crossbar Thrust roller Roller insert Internal gears
M 25
M 40
LM OG-I-PVC
LM OG-TI PVC
Plastic 15 / 20 16 50°C 1 – 100
Plastic 25 16 50°C 2 – 160
10 50°C 0.5 - 35
10 50°C 0,5 - 35
1,2 kg
1,8 kg
1.0 kg
Nylon PPO
Polykarbonat PPO
PVC -
±0,5 % ±1,5 %
±0,5 %
Viton Nylon Nylon -
0.9 kg
PVC Glass filled nylon Viton
Polykarbonat -
Barium ferrit Nylon Nylon Stainless steel 316 S/S -
SCR technology
IND_RCDL_AdBlue_DB_02_0809.doc Reprint of texts or text extracts requires prior written authorization of Badger Meter Europa GmbH. Misuse of texts, pictures or company logo will be prosecuted.
SS 1.4301 LCP – Plastic (Vectra)
LCP (Liquid Crystal Polymer)
