Flush Mounted Enclosures
166
Flush Mounted Enclosures
type 4 flush mounted enclosures
Type 4
Applications Designed to house electrical controls, terminals and instruments; providing protection from dust, dirt, oil and water. Construction • Fabricated from 14 gauge carbon steel, type 304 or 316 stainless steel. • Strong and rigid construction. • All seams continuously welded. • No holes or knockouts provided. • Rolled lip around all sides of enclosure opening to increase strength and help keep dirt and liquids out when the door is open. • A 14 gauge carbon steel, 14 gauge type 304 stainless steel, or 12 gauge type 316 stainless steel frame with mounting holes extends completely around enclosure. • Collar studs provided for mounting optional sub panels. • Door is secured with concealed liftoff hinges and slotted 1⁄4 turn latches.
Finish Standard ANSI-61 gray finish on interior and exterior of enclosures. Recoatable, smooth, white or RAL 7035 texture polyester powder coat available at no charge. Standard RAL and custom match finishes available for an additional charge, please contact Milbank for further assistance. All powder coat finishes applied over cleaned phosphatized surfaces. Carbon steel sub panels have a white polyester powder coat finish. Stainless steel enclosures have a polished #4 finish. Options Milbank can modify standard enclosures or custom design enclosures according to your specifications. Holes, cutouts, sizes, materials, and many more options are available. Quotations upon request.
Catalog Number
Industry Standards • UL 50 Listed • CUL 50 Listed • Type 4
316 Stainless Steel # MSDFMXZ16126
Enclosure Size HxWxD (inches)
Ship. Wt. (lbs)
Sub Panel Part Number
Sub Panel Size HxW (inches)
MSDFM16126
304 Stainless Steel # MSDFMXS16126
16.00 x 12.00 x 6.00
27
A-M16P12
14.2 x 10.2
MSDFM20166
MSDFMXS20166
MSDFMXZ20166
20.00 x 16.00 x 6.00
38
A-M20P16
18.2 x 14.2
MSDFM20206
MSDFMXS20206
MSDFMXZ20206
20.00 x 20.00 x 6.00
44
A-M20P20
18.2 x 18.2
MSDFM24206
MSDFMXS24206
MSDFMXZ24206
24.00 x 20.00 x 6.00
50
A-M24P20
22.2 x 18.2
MSDFM24248
MSDFMXS24248
MSDFMXZ24248
24.00 x 24.00 x 8.00
61
A-M24P24
22.2 x 22.2
MSDFM30248
MSDFMXS30248
MSDFMXZ30248
30.00 x 24.00 x 8.00
73
A-M30P24
28.2 x 22.2
Carbon Steel #
Notes: 1. Print pocket = 6” x 6” when H and W are 24” or less. Print pocket = 9” x 9” when H and W are greater than 24”. 2. Panels have formed flanges on all four sides when either height or width is equal to or greater than 22.2". 3. When height and width are less than 23" enclosure will have one slotted quarter-turn latch. 4. When height and width are greater than 23" enclosure will have two slotted quarter-turn latches. 5. When height is equal to or greater than 42" enclosure will have one 3 point slotted quarter-turn latch.
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements before ordering or installing equipment. Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 660.463.0805 | milbankworks.com
167
Flush Mounted Enclosures
Type 4 flush mounted enclosures
Type 4 Ø .281 4 holes
2.750
Quaterturn Latch will be centered when latch quantity is one
5.000
W - 1.8
Subpanel
(sold separately)
H - 1.8
H + 3.852 H + 2.852
H - 1.648 Opening
2.632
H+1
Ø .281 W - 1.53 4 holes Opening
H
D
Latch will be centeredW PrintQuaterturn Pocket latch quantity is one (sizewhen per table) W + 3.852
D + 1.071
Lid Removed 5.000
Quaterturn Latch W will - 1.8be centered when latch quantity is one
W - 1.5
.750
Subpanel
(sold separately)
H - 1.8
5.000
.750 D - 0.181
H + 3.852 1.000
H + 2.852
648 ing
H Ø .500 4 holes
W
H+1
W+1
H
32
W - 1.53 Opening W
Lid Removed
H - 1.5
D
W
Print Pocket (size per table)
D + 1.071
W + 3.852
Back
D D + 1.071
W + 3.852
D - 0.181 1.000 D - 0.181
W W+1
1.000
H+1
W W+1
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements before ordering or installing equipment. Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 660.463.0805 | milbankworks.com
Flush Mounted Enclosures
type 4 flush mounted enclosures
Type 4
Applications Designed to house electrical controls, terminals and instruments; providing protection from dust, dirt, oil and water. Construction • Fabricated from 14 gauge carbon steel, type 304 or 316 stainless steel. • Strong and rigid construction. • All seams continuously welded. • No holes or knockouts provided. • Rolled lip around all sides of enclosure opening to increase strength and help keep dirt and liquids out when the door is open. • A 14 gauge carbon steel, 14 gauge type 304 stainless steel, or 12 gauge type 316 stainless steel frame with mounting holes extends completely around enclosure. • Collar studs provided for mounting optional sub panels. • Door is secured with concealed liftoff hinges and slotted 1⁄4 turn latches.
Finish Standard ANSI-61 gray finish on interior and exterior of enclosures. Recoatable, smooth, white or RAL 7035 texture polyester powder coat available at no charge. Standard RAL and custom match finishes available for an additional charge, please contact Milbank for further assistance. All powder coat finishes applied over cleaned phosphatized surfaces. Carbon steel sub panels have a white polyester powder coat finish. Stainless steel enclosures have a polished #4 finish. Options Milbank can modify standard enclosures or custom design enclosures according to your specifications. Holes, cutouts, sizes, materials, and many more options are available. Quotations upon request.
Catalog Number
Industry Standards • UL 50 Listed • CUL 50 Listed • Type 4
316 Stainless Steel # MSDFMXZ16126
Enclosure Size HxWxD (inches)
Ship. Wt. (lbs)
Sub Panel Part Number
Sub Panel Size HxW (inches)
MSDFM16126
304 Stainless Steel # MSDFMXS16126
16.00 x 12.00 x 6.00
27
A-M16P12
14.2 x 10.2
MSDFM20166
MSDFMXS20166
MSDFMXZ20166
20.00 x 16.00 x 6.00
38
A-M20P16
18.2 x 14.2
MSDFM20206
MSDFMXS20206
MSDFMXZ20206
20.00 x 20.00 x 6.00
44
A-M20P20
18.2 x 18.2
MSDFM24206
MSDFMXS24206
MSDFMXZ24206
24.00 x 20.00 x 6.00
50
A-M24P20
22.2 x 18.2
MSDFM24248
MSDFMXS24248
MSDFMXZ24248
24.00 x 24.00 x 8.00
61
A-M24P24
22.2 x 22.2
MSDFM30248
MSDFMXS30248
MSDFMXZ30248
30.00 x 24.00 x 8.00
73
A-M30P24
28.2 x 22.2
Carbon Steel #
Notes: 1. Print pocket = 6” x 6” when H and W are 24” or less. Print pocket = 9” x 9” when H and W are greater than 24”. 2. Panels have formed flanges on all four sides when either height or width is equal to or greater than 22.2". 3. When height and width are less than 23" enclosure will have one slotted quarter-turn latch. 4. When height and width are greater than 23" enclosure will have two slotted quarter-turn latches. 5. When height is equal to or greater than 42" enclosure will have one 3 point slotted quarter-turn latch.
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements before ordering or installing equipment. Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 660.463.0805 | milbankworks.com
167
Flush Mounted Enclosures
Type 4 flush mounted enclosures
Type 4 Ø .281 4 holes
2.750
Quaterturn Latch will be centered when latch quantity is one
5.000
W - 1.8
Subpanel
(sold separately)
H - 1.8
H + 3.852 H + 2.852
H - 1.648 Opening
2.632
H+1
Ø .281 W - 1.53 4 holes Opening
H
D
Latch will be centeredW PrintQuaterturn Pocket latch quantity is one (sizewhen per table) W + 3.852
D + 1.071
Lid Removed 5.000
Quaterturn Latch W will - 1.8be centered when latch quantity is one
W - 1.5
.750
Subpanel
(sold separately)
H - 1.8
5.000
.750 D - 0.181
H + 3.852 1.000
H + 2.852
648 ing
H Ø .500 4 holes
W
H+1
W+1
H
32
W - 1.53 Opening W
Lid Removed
H - 1.5
D
W
Print Pocket (size per table)
D + 1.071
W + 3.852
Back
D D + 1.071
W + 3.852
D - 0.181 1.000 D - 0.181
W W+1
1.000
H+1
W W+1
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements before ordering or installing equipment. Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 660.463.0805 | milbankworks.com
