FREEDOM HF 12 V
Smart choice for power™
NEW
FREEDOM HF
12 V
I N V E RT E R / C H A R G E R S
FREEDOM HF REDEFINED. No Messy Wiring. Quick Installation. Minimal Battery Drain The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market. The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminal on both AC input and output enables incredibly installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.
1000 W 20 A
1000 W 55 A
1800 W 40 A
The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV’s and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger. Multistage charging helps ensure that batteries are recharged quickly and efficiently. All models are equipped with a built-in automatic transfer switch and dual GFCI receptacle. Detachable digital remote control panel display provides precise system information and can be mounted at a convenient location for remote monitoring. Quick-connect, UL-approved, strain-relief AC terminal block on both input & output sides enables incredibly easy installation
Certified to CSA Standard C22.2 No. 107.1 UL 458 with marine supplement FCC Class B
Product Features Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Xantrex Technology Inc. Ignition lockout feature helps to minimize battery drain Digital, detachable remote panel pre-attached with 25’ extension cable for remote system monitoring Automatic three-stage battery charger 3700 Gilmore Way Designed to be hardwired using quick-connect AC terminals or by connecting AC through GFCI Burnaby, British Columbia receptacles (included) Canada V5A 4B5 Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power 800 670 0707 Toll Free 604 420 1591 Fax
Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL certified to UL458 for use in mobile RV, marine and commercial applications
www.xantrex.com
541 Roske Drive, Suite A Elkhart, Indiana USA 46516 800 446 6180 Toll Free 574 294 5989 Fax
Smart choice for power™
Freedom HF 1000, 1055 & 1800 Inverter/Chargers Electrical Specifications - Inverter Models
HF 1000
HF 1055
HF 1800
Output power (continuous)
1000 W
1000 W
1800 W
Surge power
2000 W
2000 W
3600 W
Output frequency regulation
60 Hz
60 Hz
60 Hz
Inverter voltage regulation
115 +/-10 Vrms
115 +/-10 Vrms
115 +/-10 Vrms
Output wave form
Modified sine wave
Modified sine wave
Modified sine wave
Efficiency (full load)
> 80%
> 80%
> 80%
Peak efficiency
> 87%
> 87%
> 87%
No-load input power (producing output voltage)
< 10 W
< 10 W
< 10 W
Off mode current draw (display off)
< 1 mA
< 1 mA
< 1 mA
Charge rate
20 A
55A
40 A
AC input voltage range
90 – 130 Vac
90 – 130 Vac
90 – 130 Vac
AC transfer relay
30 A
30 A
30 A
Battery voltage (nominal)
12 Vdc
12 Vdc
12 Vdc
Operating voltage range
10.5 – 15.5 Vdc
10.5 – 15.5 Vdc
10.5 – 15.5 Vdc
Low battery cut-out (low limit / high limit)
10.5 Vdc / 11.8 Vdc
10.5 Vdc / 11.8 Vdc
10.5 Vdc / 11.8 Vdc
AC input (max. charge)
5 Aac
10 Aac
7.5 Aac
Default bulk charge voltage setting
14.2 Vdc
14.2 Vdc
14.2 Vdc
Default float charge voltage setting
13.5 Vdc
13.5 Vdc
13.5 Vdc
Battery charge outputs
One
One
One
Charge control
Three-stage
Three-stage
Three-stage
Battery type settings
Flooded / Gel / AGM / Fixed 13.5 Vdc
Flooded / Gel / AGM / Fixed 13.5 Vdc
Flooded / Gel / AGM / Fixed 13.5 Vdc
Equalization
No
No
No
Internal temperature-sensitive charging
Yes
Yes
Yes
Optimal operating temperature range
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
Optional remotes
Detachable display
Detachable display
Detachable display
Unit weight
10 lb (4.5 kg)
10 lb (4.5 kg)
12.8 lb (5.8 kg)
Unit dimensions (H x W x L)
4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm)
4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm)
4.2 x 9.5 x 18.0“ (106 x 241 x 457 mm)
Warranty
Two year
Two year
Two year
Part number
806-1020
806-1055
806-1840
Electrical Specifications - Charger
General Specifications
Regulatory & Environmental Compliance ETL Certified to CSA Standard C22.2 No. 107.1, UL458 with marine supplement (drip shield, part # 808-9531).
For product and purchasing inquiries contact:
www.ecodirect.com
Copyright © 2012 Xantrex Technology Inc. All rights reserved. Xantrex and Smart choice for power are trademarks of Schneider Electric Services International sprl, registered in the United States and other countries.
www.xantrex.com
NEW
FREEDOM HF
12 V
I N V E RT E R / C H A R G E R S
FREEDOM HF REDEFINED. No Messy Wiring. Quick Installation. Minimal Battery Drain The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market. The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminal on both AC input and output enables incredibly installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.
1000 W 20 A
1000 W 55 A
1800 W 40 A
The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV’s and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger. Multistage charging helps ensure that batteries are recharged quickly and efficiently. All models are equipped with a built-in automatic transfer switch and dual GFCI receptacle. Detachable digital remote control panel display provides precise system information and can be mounted at a convenient location for remote monitoring. Quick-connect, UL-approved, strain-relief AC terminal block on both input & output sides enables incredibly easy installation
Certified to CSA Standard C22.2 No. 107.1 UL 458 with marine supplement FCC Class B
Product Features Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Xantrex Technology Inc. Ignition lockout feature helps to minimize battery drain Digital, detachable remote panel pre-attached with 25’ extension cable for remote system monitoring Automatic three-stage battery charger 3700 Gilmore Way Designed to be hardwired using quick-connect AC terminals or by connecting AC through GFCI Burnaby, British Columbia receptacles (included) Canada V5A 4B5 Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power 800 670 0707 Toll Free 604 420 1591 Fax
Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL certified to UL458 for use in mobile RV, marine and commercial applications
www.xantrex.com
541 Roske Drive, Suite A Elkhart, Indiana USA 46516 800 446 6180 Toll Free 574 294 5989 Fax
Smart choice for power™
Freedom HF 1000, 1055 & 1800 Inverter/Chargers Electrical Specifications - Inverter Models
HF 1000
HF 1055
HF 1800
Output power (continuous)
1000 W
1000 W
1800 W
Surge power
2000 W
2000 W
3600 W
Output frequency regulation
60 Hz
60 Hz
60 Hz
Inverter voltage regulation
115 +/-10 Vrms
115 +/-10 Vrms
115 +/-10 Vrms
Output wave form
Modified sine wave
Modified sine wave
Modified sine wave
Efficiency (full load)
> 80%
> 80%
> 80%
Peak efficiency
> 87%
> 87%
> 87%
No-load input power (producing output voltage)
< 10 W
< 10 W
< 10 W
Off mode current draw (display off)
< 1 mA
< 1 mA
< 1 mA
Charge rate
20 A
55A
40 A
AC input voltage range
90 – 130 Vac
90 – 130 Vac
90 – 130 Vac
AC transfer relay
30 A
30 A
30 A
Battery voltage (nominal)
12 Vdc
12 Vdc
12 Vdc
Operating voltage range
10.5 – 15.5 Vdc
10.5 – 15.5 Vdc
10.5 – 15.5 Vdc
Low battery cut-out (low limit / high limit)
10.5 Vdc / 11.8 Vdc
10.5 Vdc / 11.8 Vdc
10.5 Vdc / 11.8 Vdc
AC input (max. charge)
5 Aac
10 Aac
7.5 Aac
Default bulk charge voltage setting
14.2 Vdc
14.2 Vdc
14.2 Vdc
Default float charge voltage setting
13.5 Vdc
13.5 Vdc
13.5 Vdc
Battery charge outputs
One
One
One
Charge control
Three-stage
Three-stage
Three-stage
Battery type settings
Flooded / Gel / AGM / Fixed 13.5 Vdc
Flooded / Gel / AGM / Fixed 13.5 Vdc
Flooded / Gel / AGM / Fixed 13.5 Vdc
Equalization
No
No
No
Internal temperature-sensitive charging
Yes
Yes
Yes
Optimal operating temperature range
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
Optional remotes
Detachable display
Detachable display
Detachable display
Unit weight
10 lb (4.5 kg)
10 lb (4.5 kg)
12.8 lb (5.8 kg)
Unit dimensions (H x W x L)
4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm)
4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm)
4.2 x 9.5 x 18.0“ (106 x 241 x 457 mm)
Warranty
Two year
Two year
Two year
Part number
806-1020
806-1055
806-1840
Electrical Specifications - Charger
General Specifications
Regulatory & Environmental Compliance ETL Certified to CSA Standard C22.2 No. 107.1, UL458 with marine supplement (drip shield, part # 808-9531).
For product and purchasing inquiries contact:
www.ecodirect.com
Copyright © 2012 Xantrex Technology Inc. All rights reserved. Xantrex and Smart choice for power are trademarks of Schneider Electric Services International sprl, registered in the United States and other countries.
www.xantrex.com
