g3s10 chest press - GymStore.com
System dealers will provide service and maintenance training at our corporate facility upon request.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
equipment is used properly to avoid injury.
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
Cottage Grove WI 53527
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
1610 Landmark Drive
Fax 608.839.8687
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
Matrix Fitness Systems Corp.
www.matrixfitness.com
IMPORTANT SAFETY INFORMATION
Toll Free 866.693.4863
G3S10 CHEST PRESS
PART # MH0204509B Step 1
Step 5 Screw Arc-flat Washer Screw Lock Washer Flat Washer
G14
Belt Routing Detail
Sketch Qty 16 16 24 8
Item
Description
G12 G13 G14 D32
Flat Washer (M10) Lock Washer (M10) Cap Screw (M10X25L) Arc-Flat Washer
Lock Washer
Flat Washer Belt
G14
G3S10 CHEST PRESS
D32
G13
Allen Head Cap Screw
Attachment Plate
G12
Item
Description
Sketch Qty
F13 F18 F19 F03
Allen Head Cap Screw Flat Washer (M5) Lock Washer (M5) Attachment Plate
12 12 12 2
1) Attach the shorter belt (F02) and route as shown in the box below.
G3S10 - Chest Press
2) Attach the longer belt (F01) and route as shown in the box below.
UNPACKING G3S10 CHEST PRESS Thank you for purchasing a MATRIX Fitness product.Your MATRIX G3S10 Chest Press is inspected before it is packaged. Carefully unpack the unit from this box and dispose of the packing materials in accordance
Belt (F01)
with your local laws.
Belt (F02)
CAUTION The weight of the G3S10 Chest Press is 607 lbs. (275kg) not including the weight stack. To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Step 2 Input Detail
D20 x2
Screw
H16 x2
D30 x1
Flange Bushing
Input Arm
Flange Bushing
Flat Washer Screw D31
D16 x3 D17 x2 D22 x2
Item
Description
D16 D17 D20 D22 D24 D30 D31 H16
Flat Washer(M12) Lock Washer(M12) Wavy Washer Screw (M12X25L) Bushing Cover Bolt(M12X110L) Nylon Nut(M12) Flange Bushing
Sketch
Qty 3 2 2 2 2 1 1 2
D24 x2
2 3 4 5 6
TOOLS NEEDED DESCRIPTION 3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench Guide Rod Lubrication Hardware Bag
Step 6
SKETCH
Accessory Detail
QUANTITY 1 1 1 1 1 1 1 1 1 1
B21 x2
Upper Cover x2
B47
Item B21 B47 B43 B51 Q05 Q06 B24 B46 Q01 Q02
7 8
If any items are missing please contact your country's local Matrix dealer for assistance.
Upholstry Detail
Step 4
Item Description Sketch Qty G11 Screw (M10x25L) 11
Weight Stack Detail
G11 x11
K12 L14 F19 F18 K05 K18 L11 L09
Item B26 F18 K05 K07 K12 K18 L09 F19 L11 L14
Description Sketch Screw (M8x30L) Flat Washer (M5) Knurled Belt Securing Insert Rubber Stack Cushions E-Clipper Flat Washer Screw (M8xL20L) Lock Washer (M5) Lock Washer (M8) Allen Head Cap Screw
B26
Qty 2 4 1 2 4 2 2 2 4 4
Guide Sleeve
10
Guide Rod
Knurled Belt Securing Insert
Allen Head Cap Screw
25 40 55
Top Weight
70 85 100
10
115
Selector Pin
130 145 160 175 190 205 220 235 250 265 280 295
K07
Description panel Q05 x6
Q06 x6
9
Step 3
Towel / Water Bottle Holder
B51 x6 B43 x6
Description Screw (M8x30L) Screw (M8x30L) Screw (M4x12L) Internal Tooth Lock Washer (M4) Rubber Shield Spacer Rubber Tip Weight Shield Bolt Water Bottle Holder Description Panel Weight Shield Upper Cover
Sketch Qty 2 2 6 6 6 6 1 1 1 2
Weight Shield
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
equipment is used properly to avoid injury.
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
Cottage Grove WI 53527
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
1610 Landmark Drive
Fax 608.839.8687
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
Matrix Fitness Systems Corp.
www.matrixfitness.com
IMPORTANT SAFETY INFORMATION
Toll Free 866.693.4863
G3S10 CHEST PRESS
PART # MH0204509B Step 1
Step 5 Screw Arc-flat Washer Screw Lock Washer Flat Washer
G14
Belt Routing Detail
Sketch Qty 16 16 24 8
Item
Description
G12 G13 G14 D32
Flat Washer (M10) Lock Washer (M10) Cap Screw (M10X25L) Arc-Flat Washer
Lock Washer
Flat Washer Belt
G14
G3S10 CHEST PRESS
D32
G13
Allen Head Cap Screw
Attachment Plate
G12
Item
Description
Sketch Qty
F13 F18 F19 F03
Allen Head Cap Screw Flat Washer (M5) Lock Washer (M5) Attachment Plate
12 12 12 2
1) Attach the shorter belt (F02) and route as shown in the box below.
G3S10 - Chest Press
2) Attach the longer belt (F01) and route as shown in the box below.
UNPACKING G3S10 CHEST PRESS Thank you for purchasing a MATRIX Fitness product.Your MATRIX G3S10 Chest Press is inspected before it is packaged. Carefully unpack the unit from this box and dispose of the packing materials in accordance
Belt (F01)
with your local laws.
Belt (F02)
CAUTION The weight of the G3S10 Chest Press is 607 lbs. (275kg) not including the weight stack. To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Step 2 Input Detail
D20 x2
Screw
H16 x2
D30 x1
Flange Bushing
Input Arm
Flange Bushing
Flat Washer Screw D31
D16 x3 D17 x2 D22 x2
Item
Description
D16 D17 D20 D22 D24 D30 D31 H16
Flat Washer(M12) Lock Washer(M12) Wavy Washer Screw (M12X25L) Bushing Cover Bolt(M12X110L) Nylon Nut(M12) Flange Bushing
Sketch
Qty 3 2 2 2 2 1 1 2
D24 x2
2 3 4 5 6
TOOLS NEEDED DESCRIPTION 3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench Guide Rod Lubrication Hardware Bag
Step 6
SKETCH
Accessory Detail
QUANTITY 1 1 1 1 1 1 1 1 1 1
B21 x2
Upper Cover x2
B47
Item B21 B47 B43 B51 Q05 Q06 B24 B46 Q01 Q02
7 8
If any items are missing please contact your country's local Matrix dealer for assistance.
Upholstry Detail
Step 4
Item Description Sketch Qty G11 Screw (M10x25L) 11
Weight Stack Detail
G11 x11
K12 L14 F19 F18 K05 K18 L11 L09
Item B26 F18 K05 K07 K12 K18 L09 F19 L11 L14
Description Sketch Screw (M8x30L) Flat Washer (M5) Knurled Belt Securing Insert Rubber Stack Cushions E-Clipper Flat Washer Screw (M8xL20L) Lock Washer (M5) Lock Washer (M8) Allen Head Cap Screw
B26
Qty 2 4 1 2 4 2 2 2 4 4
Guide Sleeve
10
Guide Rod
Knurled Belt Securing Insert
Allen Head Cap Screw
25 40 55
Top Weight
70 85 100
10
115
Selector Pin
130 145 160 175 190 205 220 235 250 265 280 295
K07
Description panel Q05 x6
Q06 x6
9
Step 3
Towel / Water Bottle Holder
B51 x6 B43 x6
Description Screw (M8x30L) Screw (M8x30L) Screw (M4x12L) Internal Tooth Lock Washer (M4) Rubber Shield Spacer Rubber Tip Weight Shield Bolt Water Bottle Holder Description Panel Weight Shield Upper Cover
Sketch Qty 2 2 6 6 6 6 1 1 1 2
Weight Shield
