geo therm
geo
Ultrasound Surveys
geo
therm
Thermal Imaging Surveys & Condition Monitoring Services
therm
We install and configure Partial Discharge (PD) sensors mounted to HV switchboards monitor for PD remotely from anywhere in
‘Ultrasound - the high frequency noise in HV systems indicating partial discharge’
the world. We utilise handheld ultrasonic probes to detect high
Geo Therm Ltd is a UK based inspection and services
frequency noise escaping from compressed air and hydro-carbon
company, founded in 2002. Since this time we
lines. We are also capable of detecting worn pump and motor
have supported numerous companies, SME’s and
bearings using this technology.
individuals, with the provision of our thermal imaging
Our ultrasonic devices detect: • Arcing, tracking and corona in HV electrical distribution switchgear
and ultrasound condition based monitoring (CBM) A G E O C E N T R I C C O M P A N Y services and inspections, including the supply and
Process
Offshore
installation of infrared inspection windows and
•E scaping gases, passing valves, cavitation, vacuum leaks, steam trap mal-functioning in industrial piping
the Delta T Alert™ temperature probe. Locating
• Poor lubrication and bearing issues in mechanical and reciprocating machinery.
mechanical, pneumatic and hydro-carbon systems
heat and sound deficiencies in LV/HV electrical, all non-invasively. We are ISO 9001, Safe Contractor accredited and FPAL registered.
Compressed Air Leak Detection We use the latest ultrasonic equipment to pin-point the smallest compressed air leaks, even in the nosiest environment. Compressed air is considered the forth utility, typically this vital resource is undermanaged and inefficient, representing a substantial energy cost component to any manufacturing or process facility.
www.geothermltd.co.uk Offices in Europe • North America Middle East - Africa • Asia Pacific
Follow us
The benefits of air leak detection include:
Renewables
T: +44 (0) 1502 723241 [email protected]
Facilities Management
• Immediate reduction of electricity costs upon leak identification and repair • Reduction in Carbon foot print • Improves workplace safety • Improves compressor reliability and longevity.
‘You can’t manage what you don’t measure’
‘Air is free - until it’s compressed’
Quality Services Without Compromise
Thermal Imaging Surveys
Infrared (IR) Window Installation
Geo Therm Ltd perform infrared (IR) thermographic
We retro-fit IR inspection windows to remove the hazards
surveys to detect and monitor extreme temperatures
relating to inspecting energised electrical distribution
in electrical distribution and mechanical equipment to
equipment. Installation allows safe viewing without
prevent downtime in industry, identifying hot spots in
opening panels and exposing personnel to the potential
vessel engine rooms and energy losses in commercial
of electrocution and arc flash. We supply and install all
and domestic buildings. Improving heating deficiencies,
types of IR windows (IRISS, CorDEX, FLIR and FLUKE),
effectively
because we know accessing LV and HV equipment for
directing
maintenance
strategies
to
successfully prevent asset downtime, safety and
regular PM needs come at a risk.
compliance with regular preventative maintenance (PM)
The benefits of IR windows include:
needs, vessel class prerequisites and insurance risk assessments against fire and consequential losses in: • Production and manufacturing facilities • Refineries, offshore oil & gas and maritime industries • The nuclear and energy sectors • The built environment: domestic and commercial buildings, coldstores and warehousing.
• Improved survey thoroughness, frequency and access on equipment that would otherwise have been missed • Installation removes the need to open or power down equipment
We supply, retro-fit and configure the
‘Heat is the early precursor to equipment failure, monitoring elevated temperatures in vital systems will direct maintenance attention fast’
Delta T Alert™ wireless system, the latest selfcontained remote temperature-monitoring sensor available to-date. The Delta T Alert™ monitors and alarms the end user to any pre-programmed
temperature
deviation,
indentifying the early onset of potential failure. Benefits of the Delta T Alert™ include: •A larm - audio, visual and email allowing immediate notification as issues arise • Reporting - up to 8 readings per day for trend analysis • On demand status reports •P rovides standalone, remote temperature monitoring of vital systems.
IR Gas Find Surveys We utilise the optical infrared gas-find camera to non-invasively monitor fugitive gas emissions within petrochemical refineries, offshore process
• Able to withstand 11kVA arc flash. IP65/IP67 rated for outdoor use
platforms and storage facilities. Scanning for
• Inexpensive, short installation time, clear view crystal or polymer lens, available in bespoke sizes
targeting high risk process systems to remove
• Installation removes high risk behaviours • Maintains closed and guarded condition, reduced manpower to survey • Successfully used in the processing and manufacturing industries, food sectors, offshore industries and utilities to help maintain operational efficiency and employee safety.
‘Installation of IR windows is the safest means to view inside electrical cabinets without having to shut the system down’
‘The human eye cannot see heat until a component is glowing cherry red’
Delta T Alert™
hydro-carbon leaks at a safe working distance; risks of polution and fire. IR Gas Find benefits include: •L ocating leaking gasket joints, valves and storage vessels holding volatile products • Improve upon site best practices •M aximise productivity and profits •N o disruption to operations •E nvironmental and regulatory compliance.
Quality Services Without Compromise
Ultrasound Surveys
geo
therm
Thermal Imaging Surveys & Condition Monitoring Services
therm
We install and configure Partial Discharge (PD) sensors mounted to HV switchboards monitor for PD remotely from anywhere in
‘Ultrasound - the high frequency noise in HV systems indicating partial discharge’
the world. We utilise handheld ultrasonic probes to detect high
Geo Therm Ltd is a UK based inspection and services
frequency noise escaping from compressed air and hydro-carbon
company, founded in 2002. Since this time we
lines. We are also capable of detecting worn pump and motor
have supported numerous companies, SME’s and
bearings using this technology.
individuals, with the provision of our thermal imaging
Our ultrasonic devices detect: • Arcing, tracking and corona in HV electrical distribution switchgear
and ultrasound condition based monitoring (CBM) A G E O C E N T R I C C O M P A N Y services and inspections, including the supply and
Process
Offshore
installation of infrared inspection windows and
•E scaping gases, passing valves, cavitation, vacuum leaks, steam trap mal-functioning in industrial piping
the Delta T Alert™ temperature probe. Locating
• Poor lubrication and bearing issues in mechanical and reciprocating machinery.
mechanical, pneumatic and hydro-carbon systems
heat and sound deficiencies in LV/HV electrical, all non-invasively. We are ISO 9001, Safe Contractor accredited and FPAL registered.
Compressed Air Leak Detection We use the latest ultrasonic equipment to pin-point the smallest compressed air leaks, even in the nosiest environment. Compressed air is considered the forth utility, typically this vital resource is undermanaged and inefficient, representing a substantial energy cost component to any manufacturing or process facility.
www.geothermltd.co.uk Offices in Europe • North America Middle East - Africa • Asia Pacific
Follow us
The benefits of air leak detection include:
Renewables
T: +44 (0) 1502 723241 [email protected]
Facilities Management
• Immediate reduction of electricity costs upon leak identification and repair • Reduction in Carbon foot print • Improves workplace safety • Improves compressor reliability and longevity.
‘You can’t manage what you don’t measure’
‘Air is free - until it’s compressed’
Quality Services Without Compromise
Thermal Imaging Surveys
Infrared (IR) Window Installation
Geo Therm Ltd perform infrared (IR) thermographic
We retro-fit IR inspection windows to remove the hazards
surveys to detect and monitor extreme temperatures
relating to inspecting energised electrical distribution
in electrical distribution and mechanical equipment to
equipment. Installation allows safe viewing without
prevent downtime in industry, identifying hot spots in
opening panels and exposing personnel to the potential
vessel engine rooms and energy losses in commercial
of electrocution and arc flash. We supply and install all
and domestic buildings. Improving heating deficiencies,
types of IR windows (IRISS, CorDEX, FLIR and FLUKE),
effectively
because we know accessing LV and HV equipment for
directing
maintenance
strategies
to
successfully prevent asset downtime, safety and
regular PM needs come at a risk.
compliance with regular preventative maintenance (PM)
The benefits of IR windows include:
needs, vessel class prerequisites and insurance risk assessments against fire and consequential losses in: • Production and manufacturing facilities • Refineries, offshore oil & gas and maritime industries • The nuclear and energy sectors • The built environment: domestic and commercial buildings, coldstores and warehousing.
• Improved survey thoroughness, frequency and access on equipment that would otherwise have been missed • Installation removes the need to open or power down equipment
We supply, retro-fit and configure the
‘Heat is the early precursor to equipment failure, monitoring elevated temperatures in vital systems will direct maintenance attention fast’
Delta T Alert™ wireless system, the latest selfcontained remote temperature-monitoring sensor available to-date. The Delta T Alert™ monitors and alarms the end user to any pre-programmed
temperature
deviation,
indentifying the early onset of potential failure. Benefits of the Delta T Alert™ include: •A larm - audio, visual and email allowing immediate notification as issues arise • Reporting - up to 8 readings per day for trend analysis • On demand status reports •P rovides standalone, remote temperature monitoring of vital systems.
IR Gas Find Surveys We utilise the optical infrared gas-find camera to non-invasively monitor fugitive gas emissions within petrochemical refineries, offshore process
• Able to withstand 11kVA arc flash. IP65/IP67 rated for outdoor use
platforms and storage facilities. Scanning for
• Inexpensive, short installation time, clear view crystal or polymer lens, available in bespoke sizes
targeting high risk process systems to remove
• Installation removes high risk behaviours • Maintains closed and guarded condition, reduced manpower to survey • Successfully used in the processing and manufacturing industries, food sectors, offshore industries and utilities to help maintain operational efficiency and employee safety.
‘Installation of IR windows is the safest means to view inside electrical cabinets without having to shut the system down’
‘The human eye cannot see heat until a component is glowing cherry red’
Delta T Alert™
hydro-carbon leaks at a safe working distance; risks of polution and fire. IR Gas Find benefits include: •L ocating leaking gasket joints, valves and storage vessels holding volatile products • Improve upon site best practices •M aximise productivity and profits •N o disruption to operations •E nvironmental and regulatory compliance.
Quality Services Without Compromise
