Glazed Porcelain Wall Tile - Florida Tile
Glazed Porcelain Wall Tile
Shown: IP00 12x22 Arles
ImperoHDP glazed porcelain wall tile by Florida Tile is the new wall tile collection inspired by the elegance of Travertino Romano used in the ancient Roman monuments. The surface of ImperoHDP is stacked in the design creating a break of levels that reproduces shades of Travertino, from milky white to walnut, through yellow to pink. Thanks to high technical and aesthetic characteristics, this product allows a lot of versatility and delivers an uncompromising level of color and variation using our HDP – High Definition Porcelain® printing technology. These combined style and technology can be used in any design, ImperoHDP is a perfect product for covering internal and external walls of public, commercial and residential environments of contemporary and architecture of the past. Sized 12x22 permit the laying interlocking turn by creating uniform walls and aesthetical continuity. Frost, light and spots resistant, this product is unalterable in time, simple to lay and to clean and it doesn’t require any additional treatments or maintenance. This porcelain wall tile product line is appropriate for all interior and exterior wall and backsplash applications, is made of 40% pre-consumer recycled content and is GREENGUARD® and Porcelain Tile Certified.
Shown on Front: IP10 12x22 Chester
TODI
Shown: IP30 12x22 Todi
IP30 12x22 Todi
IP30OC12x6 Todi Outside Corners (Set of 4, includes 2 Male and 2 Female) (Available in all three colors)
CHESTER Shown: IP10 12x22 Chester, AT45 39x39 THINNER Aventis Nut
IP10 12x22 Chester IP10OC12x6 Chester Outside Corners (Set of 4, includes 2 Male and 2 Female) (Not shown)
ARLES
Shown: IP00 12x22 Arles, 28338 8x36 MagnoliaHDP Fir
IP00 12x22 Arles IP00OC12x6 Arles Outside Corners (Set of 4, includes 2 Male and 2 Female) (Not shown)
Shown: IP30 12x22 Todi
Typical Uses ImperoHDP glazed porcelain wall tile is appropriate for all residential and commercial wall and backsplash applications.
Field Tile Nominal Size¹
Metric (cm)
Pcs./Sq Ft2
Thickness3
12” x 22”
30 x 56
.54
10mm
1
Notice: Not all flooring products are suitable for wet areas, specialized applications or commercial use. Please refer to the American National Standard Specifications for Ceramic Tile (ANSI A137.1) for ceramic, stone and glass installation for specific usage and installation information. This Florida Tile product will contribute to USGBC LEED points and the ANSI approved NAHB Green Building Points.
2 3
These values may vary from lot to lot. These values are based on actual sizes including the grout joint. May not apply to textured surfaces or tiles with uneven back patterns.
Trim
Shape
SKU
Nominal Size
Metric (cm)
Outside Corner (female)
OC12x6*
6” x 12”
15 x 30
Outside Corner (male)
OC12x6*
6” x 12”
15 x 30
*
Set of 4, (2) male and (2) female.
Properties (Wall)
ASTM
ANSI
Results¹
Color Variations
DCOF AcuTest2
A137.1
≥0.42
N/A
Durability Classification
C-1027
As Reported3
N/A
Color reproductions in this printed piece may vary from actual tile colors. Final selection should be made from actual tile samples.
Glaze Hardness
Mohs Scale
N/A
7 Mohs
Break Strength
C-648
250 lbs.
Pass
Water Absorption
C-373
Shown: IP00 12x22 Arles
ImperoHDP glazed porcelain wall tile by Florida Tile is the new wall tile collection inspired by the elegance of Travertino Romano used in the ancient Roman monuments. The surface of ImperoHDP is stacked in the design creating a break of levels that reproduces shades of Travertino, from milky white to walnut, through yellow to pink. Thanks to high technical and aesthetic characteristics, this product allows a lot of versatility and delivers an uncompromising level of color and variation using our HDP – High Definition Porcelain® printing technology. These combined style and technology can be used in any design, ImperoHDP is a perfect product for covering internal and external walls of public, commercial and residential environments of contemporary and architecture of the past. Sized 12x22 permit the laying interlocking turn by creating uniform walls and aesthetical continuity. Frost, light and spots resistant, this product is unalterable in time, simple to lay and to clean and it doesn’t require any additional treatments or maintenance. This porcelain wall tile product line is appropriate for all interior and exterior wall and backsplash applications, is made of 40% pre-consumer recycled content and is GREENGUARD® and Porcelain Tile Certified.
Shown on Front: IP10 12x22 Chester
TODI
Shown: IP30 12x22 Todi
IP30 12x22 Todi
IP30OC12x6 Todi Outside Corners (Set of 4, includes 2 Male and 2 Female) (Available in all three colors)
CHESTER Shown: IP10 12x22 Chester, AT45 39x39 THINNER Aventis Nut
IP10 12x22 Chester IP10OC12x6 Chester Outside Corners (Set of 4, includes 2 Male and 2 Female) (Not shown)
ARLES
Shown: IP00 12x22 Arles, 28338 8x36 MagnoliaHDP Fir
IP00 12x22 Arles IP00OC12x6 Arles Outside Corners (Set of 4, includes 2 Male and 2 Female) (Not shown)
Shown: IP30 12x22 Todi
Typical Uses ImperoHDP glazed porcelain wall tile is appropriate for all residential and commercial wall and backsplash applications.
Field Tile Nominal Size¹
Metric (cm)
Pcs./Sq Ft2
Thickness3
12” x 22”
30 x 56
.54
10mm
1
Notice: Not all flooring products are suitable for wet areas, specialized applications or commercial use. Please refer to the American National Standard Specifications for Ceramic Tile (ANSI A137.1) for ceramic, stone and glass installation for specific usage and installation information. This Florida Tile product will contribute to USGBC LEED points and the ANSI approved NAHB Green Building Points.
2 3
These values may vary from lot to lot. These values are based on actual sizes including the grout joint. May not apply to textured surfaces or tiles with uneven back patterns.
Trim
Shape
SKU
Nominal Size
Metric (cm)
Outside Corner (female)
OC12x6*
6” x 12”
15 x 30
Outside Corner (male)
OC12x6*
6” x 12”
15 x 30
*
Set of 4, (2) male and (2) female.
Properties (Wall)
ASTM
ANSI
Results¹
Color Variations
DCOF AcuTest2
A137.1
≥0.42
N/A
Durability Classification
C-1027
As Reported3
N/A
Color reproductions in this printed piece may vary from actual tile colors. Final selection should be made from actual tile samples.
Glaze Hardness
Mohs Scale
N/A
7 Mohs
Break Strength
C-648
250 lbs.
Pass
Water Absorption
C-373
