Glyder® dimmers and fan controls
Glyder dimmers and fan controls ®
2.86 in (73 mm) Product family features Slide adjusts light to your desired level
•
100% factory tested
•
Coordinating Fassada® wallplates only available separately
•
Custom engraving available for wallplates, see pg. 155
•
4.60 in (117 mm)
Traditional wallplate opening
Control types
Single-pole (one location) 3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
.23 in (5.8 mm) profile
Ceiling fans
Lighting load interfaces are not compatible with this family.
Shown actual size: Glyder dimmer and 1-gang Fassada wallplate in White (WH).
www.lutron.com | 1.800.523.9466 |
130
Traditional wallplate opening
Glyder dimmers and fan controls ®
Available finishes Use BOLD color code in model number (Example: GL-600P-IV) Gloss finishes*
WH White
IV Ivory
Dimmers and fan controls Dimmers with on/off switch
Slide-to-off fan controls
Button turns on/off
•
Slide up to brighten; down to dim
•
•
Slide up to on/increase speed; down to decrease/off
•
For use with multiple ceiling paddle fans or exhaust fans
Slide-to-off dimmers Slide up to on/brighten; down to dim/off
•
*Coordinating wallplates only available separately. For wallplate information, see pg. 166. www.lutron.com | 1.800.523.9466 |
131
Traditional wallplate opening
Glyder dimmers and fan controls ®
Connections overview
Dimmer, fan control and replacement knob model numbers Incandescent/halogen dimmers
Load connections*
Dimmers with on/off switch Incandescent/ Halogen
Magnetic Low-Voltage
Ceiling Fan
MLV Transformer (by others)
Single-pole 120 V 600 W Single-pole 120V 1000 W
GL-600P-CC3
3-way 120 V 600 W 3-way 120 V 1000 W
GL-603P-CC3
Fan Control
MLV Dimmer
GL-1000-CC3
Slide-to-off dimmer
Control types (for 2 or more locations) Dim from one location, switch from the others
3-way Dimmer
GL-600-CC3
Magnetic low-voltage dimmers Single-pole 120 V 600 VA (450 W)
Light Source
GL-103P-CC3
Slide-to-off dimmers Single-pole 120 V 600 W Single-pole 120 V 1000 W
Incandescent/ Halogen Dimmer
GL-10P-CC3
3-way Switch
GLV-600-CC3
The stated VA (Volt-Ampere) rating includes the magnetic transformer heat losses and the lamp load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20% transformer loss. Fan control Slide-to-off fan control—fully variable Single-pole fan control 120 V 5 A
Light Source
3-way Dimmer
4-way Switch (1 or more)
3-way Switch
GFS-5E-CC3
Knobs Slide-to-off Preset
GK-CC3 GKP-CC3
CC3: Gloss White (WH) and Ivory (IV), see pg. 131 (Wallplates not included, order separately, see pg. 168) *For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless otherwise noted, see pg. 170. 132
Glyder dimmers and fan controls ®
Accessories Wallplates
4.67 in (119 mm) Shown actual size: 2-gang Fassada® wallplate in White (WH). For more information about Traditional wallplates, see pg. 166.
4.60 in (117 mm)
Traditional wallplate opening
.23 in (5.8 mm) profile
Coordinated electrical devices For more information about coordinated Designer electrical devices, see pg. 163.
Tamper resistant GFCI receptacle
Customizable 6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack 133
®
4.67 in (119 mm) Shown actual size: Abella dimmers in a 2-gang Fassada wallplate in White (WH).
4.60 in (117 mm)
Wallplates and accessories | Traditional | Fassada
.23 in (5.8 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Abella®, Ceana®, Ariadni®, Glyder® and Rotary
•
All Lutron wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
Ganging and derating Traditional wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
•
Traditional wallplates can be paired with designer accessories to complete the look of any room
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 172
•
Customize your traditional wallplate with engraving, contact customer service to get started at 1.888.LUTRON1
•
www.lutron.com | 1.800.523.9466 |
166
Wallplates and accessories | Traditional | Fassada
®
Available finishes Use BOLD color code in model number (Example: FG-1-AL) Gloss finishes
WH White
LA Light Almond
AL Almond
IV Ivory
BL Black
Metal finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls. www.lutron.com | 1.800.523.9466 |
167
Wallplates and accessories | Traditional | Fassada
®
Wallplates for Abella®, Ceana®, Ariadni®, Glyder® and Rotary
1-gang Stainless Steel* W: 2.86 in (73 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
2-gang Stainless Steel* W: 4.67 in (119 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
FG-1-CC3 FW-1-SS
FG-2-CC3 FW-2-SS
Combination opening
3-gang Stainless Steel* W: 6.48 in (165 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
FG-3-CC3 FW-3-SS
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes. Controls must have heat-sink fins broken for multi-gang installations. Removing this metal reduces the amount of heat that the control can dissipate, thus reducing the wattage capacity of the control. Please derate dimmers and switches as required. Multi-gang dimmer installations may require derating, see pg. 170.
Rotate the wallplate for small/large or large/small opening applications. 2-gang (1 traditional, FG-2-TD-CC3 1 designer opening) Stainless Steel* FW-2-TD-SS W: 4.67 in (119 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
CC3: Gloss color codes, see pg. 167
www.lutron.com | 1.800.523.9466 |
Controls must have heat-sink fins broken for multi-gang installations. Multi-gang dimmer installations may require derating, see pg. 170. *Stainless Steel wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls. 168
Appendix | Multi-ganging derating Appendix | Ganging andand derating How to understand ganging and derating Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pgs. 172–173
Custom ganging for Architectural style controls For Architectural style dimmers and switches, it is possible to retain the maximum capacity of dimmers in multi-gang applications via custom architectural multi-gang: •
•
• •
•
May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls Visit www.lutron.com/customganging for additional information
Standard ganging for dimmers, switches and accessories New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo® Nova Tb®
Maestro® Maestro IR® Maestro Wireless® Spacer System® Diva® Lyneo® Lx Skylark® Skylark ContourTM
Abella® Ceana® Ariadni® Glyder® Rotary
Derating Table 1 pg. 172
Derating Table 2 pg. 173
Derating Table 1 pg. 172
Derating Table 1 pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken Full capacity
One Nova Tb® dimmer
=
Standard 1-gang backbox
+
=
Three Nova Tb dimmers “Fins Broken” ganging
Standard 1-gang architectural wallplate
+
Standard 2-gang backbox
One fin broken* Partial derating
Two Nova Tb dimmers “Fins Broken” ganging
+
+
Standard 2-gang architectural wallplate
+
Standard 3-gang backbox
Inside: Two fins broken* Full derating
Standard 3-gang architectural wallplate
Outside: One fin broken* Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers “No Fins Broken” ganging
+
+
No fins broken Full capacity
Backbox with chase nipple
Custom architectural wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily. www.lutron.com | 1.800.523.9466 |
171
Appendix | Multi-ganging derating Appendix | Ganging andand derating Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix and derating Appendix| |Multi-ganging Ganging and derating Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
173
Addendum | Advanced conceptual connections Glyder
®
Low Voltage dimming
Incandescent dimming
Ceiling fan
Magnetic Low Voltage
Incandescent/ Halogen
Ceiling Fan
MLV Transformer (by others)
MLV Dimmer
Incandescent/ Halogen Dimmer
Ceiling Fan Control
For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
A44
2.86 in (73 mm) Product family features Slide adjusts light to your desired level
•
100% factory tested
•
Coordinating Fassada® wallplates only available separately
•
Custom engraving available for wallplates, see pg. 155
•
4.60 in (117 mm)
Traditional wallplate opening
Control types
Single-pole (one location) 3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
.23 in (5.8 mm) profile
Ceiling fans
Lighting load interfaces are not compatible with this family.
Shown actual size: Glyder dimmer and 1-gang Fassada wallplate in White (WH).
www.lutron.com | 1.800.523.9466 |
130
Traditional wallplate opening
Glyder dimmers and fan controls ®
Available finishes Use BOLD color code in model number (Example: GL-600P-IV) Gloss finishes*
WH White
IV Ivory
Dimmers and fan controls Dimmers with on/off switch
Slide-to-off fan controls
Button turns on/off
•
Slide up to brighten; down to dim
•
•
Slide up to on/increase speed; down to decrease/off
•
For use with multiple ceiling paddle fans or exhaust fans
Slide-to-off dimmers Slide up to on/brighten; down to dim/off
•
*Coordinating wallplates only available separately. For wallplate information, see pg. 166. www.lutron.com | 1.800.523.9466 |
131
Traditional wallplate opening
Glyder dimmers and fan controls ®
Connections overview
Dimmer, fan control and replacement knob model numbers Incandescent/halogen dimmers
Load connections*
Dimmers with on/off switch Incandescent/ Halogen
Magnetic Low-Voltage
Ceiling Fan
MLV Transformer (by others)
Single-pole 120 V 600 W Single-pole 120V 1000 W
GL-600P-CC3
3-way 120 V 600 W 3-way 120 V 1000 W
GL-603P-CC3
Fan Control
MLV Dimmer
GL-1000-CC3
Slide-to-off dimmer
Control types (for 2 or more locations) Dim from one location, switch from the others
3-way Dimmer
GL-600-CC3
Magnetic low-voltage dimmers Single-pole 120 V 600 VA (450 W)
Light Source
GL-103P-CC3
Slide-to-off dimmers Single-pole 120 V 600 W Single-pole 120 V 1000 W
Incandescent/ Halogen Dimmer
GL-10P-CC3
3-way Switch
GLV-600-CC3
The stated VA (Volt-Ampere) rating includes the magnetic transformer heat losses and the lamp load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20% transformer loss. Fan control Slide-to-off fan control—fully variable Single-pole fan control 120 V 5 A
Light Source
3-way Dimmer
4-way Switch (1 or more)
3-way Switch
GFS-5E-CC3
Knobs Slide-to-off Preset
GK-CC3 GKP-CC3
CC3: Gloss White (WH) and Ivory (IV), see pg. 131 (Wallplates not included, order separately, see pg. 168) *For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless otherwise noted, see pg. 170. 132
Glyder dimmers and fan controls ®
Accessories Wallplates
4.67 in (119 mm) Shown actual size: 2-gang Fassada® wallplate in White (WH). For more information about Traditional wallplates, see pg. 166.
4.60 in (117 mm)
Traditional wallplate opening
.23 in (5.8 mm) profile
Coordinated electrical devices For more information about coordinated Designer electrical devices, see pg. 163.
Tamper resistant GFCI receptacle
Customizable 6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack 133
®
4.67 in (119 mm) Shown actual size: Abella dimmers in a 2-gang Fassada wallplate in White (WH).
4.60 in (117 mm)
Wallplates and accessories | Traditional | Fassada
.23 in (5.8 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Abella®, Ceana®, Ariadni®, Glyder® and Rotary
•
All Lutron wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
Ganging and derating Traditional wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
•
Traditional wallplates can be paired with designer accessories to complete the look of any room
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 172
•
Customize your traditional wallplate with engraving, contact customer service to get started at 1.888.LUTRON1
•
www.lutron.com | 1.800.523.9466 |
166
Wallplates and accessories | Traditional | Fassada
®
Available finishes Use BOLD color code in model number (Example: FG-1-AL) Gloss finishes
WH White
LA Light Almond
AL Almond
IV Ivory
BL Black
Metal finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls. www.lutron.com | 1.800.523.9466 |
167
Wallplates and accessories | Traditional | Fassada
®
Wallplates for Abella®, Ceana®, Ariadni®, Glyder® and Rotary
1-gang Stainless Steel* W: 2.86 in (73 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
2-gang Stainless Steel* W: 4.67 in (119 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
FG-1-CC3 FW-1-SS
FG-2-CC3 FW-2-SS
Combination opening
3-gang Stainless Steel* W: 6.48 in (165 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
FG-3-CC3 FW-3-SS
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes. Controls must have heat-sink fins broken for multi-gang installations. Removing this metal reduces the amount of heat that the control can dissipate, thus reducing the wattage capacity of the control. Please derate dimmers and switches as required. Multi-gang dimmer installations may require derating, see pg. 170.
Rotate the wallplate for small/large or large/small opening applications. 2-gang (1 traditional, FG-2-TD-CC3 1 designer opening) Stainless Steel* FW-2-TD-SS W: 4.67 in (119 mm); H: 4.60 in (117 mm); D: .23 in (5.8 mm)
CC3: Gloss color codes, see pg. 167
www.lutron.com | 1.800.523.9466 |
Controls must have heat-sink fins broken for multi-gang installations. Multi-gang dimmer installations may require derating, see pg. 170. *Stainless Steel wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls. 168
Appendix | Multi-ganging derating Appendix | Ganging andand derating How to understand ganging and derating Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pgs. 172–173
Custom ganging for Architectural style controls For Architectural style dimmers and switches, it is possible to retain the maximum capacity of dimmers in multi-gang applications via custom architectural multi-gang: •
•
• •
•
May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls Visit www.lutron.com/customganging for additional information
Standard ganging for dimmers, switches and accessories New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo® Nova Tb®
Maestro® Maestro IR® Maestro Wireless® Spacer System® Diva® Lyneo® Lx Skylark® Skylark ContourTM
Abella® Ceana® Ariadni® Glyder® Rotary
Derating Table 1 pg. 172
Derating Table 2 pg. 173
Derating Table 1 pg. 172
Derating Table 1 pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken Full capacity
One Nova Tb® dimmer
=
Standard 1-gang backbox
+
=
Three Nova Tb dimmers “Fins Broken” ganging
Standard 1-gang architectural wallplate
+
Standard 2-gang backbox
One fin broken* Partial derating
Two Nova Tb dimmers “Fins Broken” ganging
+
+
Standard 2-gang architectural wallplate
+
Standard 3-gang backbox
Inside: Two fins broken* Full derating
Standard 3-gang architectural wallplate
Outside: One fin broken* Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers “No Fins Broken” ganging
+
+
No fins broken Full capacity
Backbox with chase nipple
Custom architectural wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily. www.lutron.com | 1.800.523.9466 |
171
Appendix | Multi-ganging derating Appendix | Ganging andand derating Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix and derating Appendix| |Multi-ganging Ganging and derating Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
173
Addendum | Advanced conceptual connections Glyder
®
Low Voltage dimming
Incandescent dimming
Ceiling fan
Magnetic Low Voltage
Incandescent/ Halogen
Ceiling Fan
MLV Transformer (by others)
MLV Dimmer
Incandescent/ Halogen Dimmer
Ceiling Fan Control
For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
A44
