GoPro Hero3+ Silver Edition Battery Replacement

GoPro Hero3+ Silver Edition Battery Replacement

GoPro Hero3+ Silver Edition Battery Replacement This guide shows how you can access and remove the battery from your GoPro Hero3+ Sliver Edition Camera.

Written By: Blake Ehlers

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

GoPro Hero3+ Silver Edition Battery Replacement

INTRODUCTION Is your GoPro is not charging properly? Your battery might need to be replaced. This guide will show you how to not only access the battery but how to remove it as well.

PARTS: GoPro Hero3/3+ Replacement Battery (1) GoPro Hero3/3+ AHDBT-301 Battery (1) GoPro Hero3/3+ AHDBT-302 Battery (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

GoPro Hero3+ Silver Edition Battery Replacement

Step 1 — Battery



Push the tab on the back of the device left to remove the plate covering the battery.

Step 2 

Use the strip of tape on the battery to remove the battery from the housing.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-11 07:53:49 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

GoPro Hero3+ Silver Edition Battery Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4