HalogenMini - The Pond Guy
HalogenMini™
TROUBLESHOOTING SYMPTOM
3 Pack Light Kit
POSSIBLE SOLUTIONS
One or more lights flicker or fail to illuminate.
-Inspect connection between Transformer(DFHD) and Lights(DFFD) -Ensure bulb is properly seated in housing -Replace failing bulb(s)
All lights fail to illuminate.
-Make sure Transformer(A) is properly seated in electrical outlet -Make sure electrical outlet provides power -Inspect connection between Transformer(DFHD) and Lights(DFFD) -Ensure bulbs are properly seated in housing
Lights fill with water.
Installation & Maintenance For Models: • HalogenMini™ (Item #120814)
-Power off unit, unscrew light cover and inspect/reposition/replace unseated or broken o-ring seals. -Inspect light cover and housing for cracks or damage
REPLACEMENT PARTS MODEL
DESCRIPTION
ITEM NUMBER
HalogenMini™ HalogenMini™
10 Watt, MR11 Bulb 4 Pack Colored Filters
#190115 #190135
12V Transformer
MR11 Bulb
Colored Filters
WARRANTY
The Pond Guy® will repair or replace any HalogenMini™ found to be defective within 1 year of the original purchase date. This limited warranty is extended exclusively to the original purchaser beginning from the date of original receipt. The bulb is not covered by this warranty. Abuse or misuse of this product voids all warranty. In case of warranty claims, the product must be returned to place of purchase accompanied with the original receipt.
thePondguy®
thePondguy®
www.thepondguy.com
www.thepondguy.com
we know ponds™ 4
we know ponds™ 1-YEAR WARRANTY
065_12
HalogenMini™
3 Pack Light Kit Installation & Maintenance Instructions
TECHNICAL SPECS MODEL
# OF LIGHTS
WATTAGE
ITEM NUMBER
HalogenMini™
3
10 Watts
#120814
INSTALLATION
DO NOT TAMPER WITH POWER CORD. LIGHTS MAY BE PLACED IN OR OUT OF WATER.
!
WARNING
• This unit may get warm when used in an open air application, turn off power and allow unit to cool before servicing.
• Keep away from flammable materials and/or children.
• Operating the lights with missing or damaged covers can result in risk of fire or electrical shock.
• Use ONLY recommended MR11 12 volt, 10 watt halogen bulbs.
• Do not exceed the voltage and wattage indicated on the transformer.
• This light assembly has not been tested or designed for use in swimming pools and hot tubs.
1) Plug the two-pin Connector(D) on the end of the Lights(B) cord into the Transformer(A) and tighten plastic retaining nut. 2) Secure desired Lens(C) on each light. 3) Place Lights(B) in desired locations. 4) Plug the Transformer(A) into a standard 110 volt outlet with GFI. HalogenMini (B)
SAFETY WARNING: FOR YOUR PROTECTION, ALWAYS UNPLUG THE UNIT FROM THE POWER SOURCE BEFORE INSTALLING OR SERVICING. SHOULD THE UNIT APPEAR TO NOT BE WORKING, DO NOT ATTEMPT TO REACH, REMOVE, OR DISASSEMBLE BEFORE DISCONNECTING IT FROM THE POWER SOURCE. 1. ALWAYS use a properly grounded AC outlet. Do not immerse the HalogenMini™ plug in water or attempt to use a wet plug. 2. Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the receptacle or plug that prevents water from traveling along the cord in the direction of the receptacle. 3. Be sure that a ground fault circuit interrupter (GFCI) is installed in the branch circuit supplying the pond equipment. 4. NEVER remove the ground pin from the plug. 5. The HalogenMini™ is not suitable for use in swimming pools, swimming ponds, or other situations where humans may make bodily contact with the water. The HalogenMini™ may be used in or out of the water. 6. The power cable cannot be replaced. If the power cable becomes damaged, the HalogenMini™ should be discarded. 7. The HalogenMini™ must be used with a transformer which is included.
(A) (D)
3'
•(A) Transformer •(B) Light •(C) Lens •(D) Connector
3' 3' (C)
MAINTENANCE
Clean lenses regularly, algae may build up on the lenses and reduce light intensity. Change bulbs annually or when the lights stop working. To change bulbs unplug lights from the power source, let them dry and remove the retainer from the HalogenMini™ by pushing down and turning counter-clockwise. Remove the lens carefully and make sure the “O” ring stays in place and is not lost. Gently pull out socket, remove the MR11 bulb and replace with the new MR11 12 volt, 10 watt bulb by aligning the pins of the bulb into the socket. Gently push the bulb down, DO NOT force it. Re-install the lens and lens retainer ensuring the “O” ring remains in the correct groove of the HalogenMini™. To maintain a water tight seal, make sure the lens is flush with the front lip of the rubber seal.
IMPORTANT: The Pond Guy®, Inc. is not responsible for losses, injury or death resulting from a failure to follow these safety precautions, misuse or abuse of equipment.
2
3
TROUBLESHOOTING SYMPTOM
3 Pack Light Kit
POSSIBLE SOLUTIONS
One or more lights flicker or fail to illuminate.
-Inspect connection between Transformer(DFHD) and Lights(DFFD) -Ensure bulb is properly seated in housing -Replace failing bulb(s)
All lights fail to illuminate.
-Make sure Transformer(A) is properly seated in electrical outlet -Make sure electrical outlet provides power -Inspect connection between Transformer(DFHD) and Lights(DFFD) -Ensure bulbs are properly seated in housing
Lights fill with water.
Installation & Maintenance For Models: • HalogenMini™ (Item #120814)
-Power off unit, unscrew light cover and inspect/reposition/replace unseated or broken o-ring seals. -Inspect light cover and housing for cracks or damage
REPLACEMENT PARTS MODEL
DESCRIPTION
ITEM NUMBER
HalogenMini™ HalogenMini™
10 Watt, MR11 Bulb 4 Pack Colored Filters
#190115 #190135
12V Transformer
MR11 Bulb
Colored Filters
WARRANTY
The Pond Guy® will repair or replace any HalogenMini™ found to be defective within 1 year of the original purchase date. This limited warranty is extended exclusively to the original purchaser beginning from the date of original receipt. The bulb is not covered by this warranty. Abuse or misuse of this product voids all warranty. In case of warranty claims, the product must be returned to place of purchase accompanied with the original receipt.
thePondguy®
thePondguy®
www.thepondguy.com
www.thepondguy.com
we know ponds™ 4
we know ponds™ 1-YEAR WARRANTY
065_12
HalogenMini™
3 Pack Light Kit Installation & Maintenance Instructions
TECHNICAL SPECS MODEL
# OF LIGHTS
WATTAGE
ITEM NUMBER
HalogenMini™
3
10 Watts
#120814
INSTALLATION
DO NOT TAMPER WITH POWER CORD. LIGHTS MAY BE PLACED IN OR OUT OF WATER.
!
WARNING
• This unit may get warm when used in an open air application, turn off power and allow unit to cool before servicing.
• Keep away from flammable materials and/or children.
• Operating the lights with missing or damaged covers can result in risk of fire or electrical shock.
• Use ONLY recommended MR11 12 volt, 10 watt halogen bulbs.
• Do not exceed the voltage and wattage indicated on the transformer.
• This light assembly has not been tested or designed for use in swimming pools and hot tubs.
1) Plug the two-pin Connector(D) on the end of the Lights(B) cord into the Transformer(A) and tighten plastic retaining nut. 2) Secure desired Lens(C) on each light. 3) Place Lights(B) in desired locations. 4) Plug the Transformer(A) into a standard 110 volt outlet with GFI. HalogenMini (B)
SAFETY WARNING: FOR YOUR PROTECTION, ALWAYS UNPLUG THE UNIT FROM THE POWER SOURCE BEFORE INSTALLING OR SERVICING. SHOULD THE UNIT APPEAR TO NOT BE WORKING, DO NOT ATTEMPT TO REACH, REMOVE, OR DISASSEMBLE BEFORE DISCONNECTING IT FROM THE POWER SOURCE. 1. ALWAYS use a properly grounded AC outlet. Do not immerse the HalogenMini™ plug in water or attempt to use a wet plug. 2. Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the receptacle or plug that prevents water from traveling along the cord in the direction of the receptacle. 3. Be sure that a ground fault circuit interrupter (GFCI) is installed in the branch circuit supplying the pond equipment. 4. NEVER remove the ground pin from the plug. 5. The HalogenMini™ is not suitable for use in swimming pools, swimming ponds, or other situations where humans may make bodily contact with the water. The HalogenMini™ may be used in or out of the water. 6. The power cable cannot be replaced. If the power cable becomes damaged, the HalogenMini™ should be discarded. 7. The HalogenMini™ must be used with a transformer which is included.
(A) (D)
3'
•(A) Transformer •(B) Light •(C) Lens •(D) Connector
3' 3' (C)
MAINTENANCE
Clean lenses regularly, algae may build up on the lenses and reduce light intensity. Change bulbs annually or when the lights stop working. To change bulbs unplug lights from the power source, let them dry and remove the retainer from the HalogenMini™ by pushing down and turning counter-clockwise. Remove the lens carefully and make sure the “O” ring stays in place and is not lost. Gently pull out socket, remove the MR11 bulb and replace with the new MR11 12 volt, 10 watt bulb by aligning the pins of the bulb into the socket. Gently push the bulb down, DO NOT force it. Re-install the lens and lens retainer ensuring the “O” ring remains in the correct groove of the HalogenMini™. To maintain a water tight seal, make sure the lens is flush with the front lip of the rubber seal.
IMPORTANT: The Pond Guy®, Inc. is not responsible for losses, injury or death resulting from a failure to follow these safety precautions, misuse or abuse of equipment.
2
3
