HF Mid Range Reader ID ISC.MR200-W/-EP
HF Mid Range Reader ID ISC.MR200-W/-EP FEATURES
Variable interfaces (RS232, LAN, WLAN)
Transmitting power of up to 1.75 W enables read ranges of up to 70 cm
Robust plastic housing (protection class IP 54)
Anti-collision function 4 different operation modes
SHORT DESCRIPTION
TECHNICAL DATA
ID ISC.MR200-EP/-W is designed for contactless data exchange with common passive ISO 15693 transponders. Due to its robust plastic housing (IP54) the reader is also suitable for industrial applications. Transmitting power of up to 1.75 W enables read ranges of up to 70 cm.
Dimensions (W x H x D) Weight Housing Protection class Color Operating frequency Transmitting power Degree of modulation Supply voltage Power consumption Antenna connection Outputs - 2 optokouplers - 1 relay (changeover contact) Inputs - 2 optokouplers Interfaces - ID ISC.MR200-EP - ID ISC.MR200-W
The reader has several I/O´s as well as a so-called antenna diagnosis function that indicates whether an antenna is not adjusted as required. The reader version ID ISC.MR200-EP has a serial interface (RS232) and a LAN interface. The version ID ISC.MR200-W offers a RS232 and a WLAN interface.
Signal generator, optical Supported transponders Protocol modes
Others
Temperature range Operation Storage Relative humidity *
200 mm x 110 mm x 60 mm 450 g ABS plastic, lockable hinged cover IP 54 RAL 7035 13.56 MHz 1 W / 1.75 W ± 2 dB 20% +/- 5% absolute 12…24 V DC +/- 5% maximum 13 VA 1 x SMA socket (50 Ω) 24 V DC / 30 mA 24 V DC / 2 A maximum 24 V DC / 20 mA RS232 and LAN (802.3) RS232 and WLAN (802.11b) 5 LED ISO 15693 (ISO 18000-3 MODE 1)* ISO Host Mode, Scan Mode, Notification Mode, Buffered Read Mode (BRM) short-circuit detection temperature monitoring
–20 °C up to 60 °C –25 °C up to 85 °C 5…95 % (not condensing)
e.g. EM HF ISO Chips, Fujitsu HF ISO Chips, IDS Sensor Chips, Infineon my-d, KSW Sensor Chips, NXP I-Code, STM ISO Chips, TI Tag-it
STANDARD CONFORMITY
ORDER DESCRIPTIONS ID ISC.MR200-EP
HF Mid Range Reader (RS232/LAN)
ID ISC.MR200-W
HF Mid Range Reader (RS232/WLAN)
Accessories: ID ISC.FW.HF.MR200-UID/OTP Firmware License
Radio licence Europe USA Canada EMC Safety Low Voltage Human Exposure Vibration Shock
EN 300 330 FCC 47 CFR Part 15 IC RSS-GEN, RSS-210 EN 301 489 EN 60950 EN 50364 EN 60068-2-6 10…150 Hz: 0,075 mm / 1 g EN 60068-2-27 acceleration: 30 g
FEIG ELECTRONIC reserves the right to change specification without notice at any time. State of information: June 2011.
HF Mid Range Reader ID ISC.MR200-W/-EP FEATURES
Variable interfaces (RS232, LAN, WLAN)
Transmitting power of up to 1.75 W enables read ranges of up to 70 cm
Robust plastic housing (protection class IP 54)
Anti-collision function 4 different operation modes
SHORT DESCRIPTION
TECHNICAL DATA
ID ISC.MR200-EP/-W is designed for contactless data exchange with common passive ISO 15693 transponders. Due to its robust plastic housing (IP54) the reader is also suitable for industrial applications. Transmitting power of up to 1.75 W enables read ranges of up to 70 cm.
Dimensions (W x H x D) Weight Housing Protection class Color Operating frequency Transmitting power Degree of modulation Supply voltage Power consumption Antenna connection Outputs - 2 optokouplers - 1 relay (changeover contact) Inputs - 2 optokouplers Interfaces - ID ISC.MR200-EP - ID ISC.MR200-W
The reader has several I/O´s as well as a so-called antenna diagnosis function that indicates whether an antenna is not adjusted as required. The reader version ID ISC.MR200-EP has a serial interface (RS232) and a LAN interface. The version ID ISC.MR200-W offers a RS232 and a WLAN interface.
Signal generator, optical Supported transponders Protocol modes
Others
Temperature range Operation Storage Relative humidity *
200 mm x 110 mm x 60 mm 450 g ABS plastic, lockable hinged cover IP 54 RAL 7035 13.56 MHz 1 W / 1.75 W ± 2 dB 20% +/- 5% absolute 12…24 V DC +/- 5% maximum 13 VA 1 x SMA socket (50 Ω) 24 V DC / 30 mA 24 V DC / 2 A maximum 24 V DC / 20 mA RS232 and LAN (802.3) RS232 and WLAN (802.11b) 5 LED ISO 15693 (ISO 18000-3 MODE 1)* ISO Host Mode, Scan Mode, Notification Mode, Buffered Read Mode (BRM) short-circuit detection temperature monitoring
–20 °C up to 60 °C –25 °C up to 85 °C 5…95 % (not condensing)
e.g. EM HF ISO Chips, Fujitsu HF ISO Chips, IDS Sensor Chips, Infineon my-d, KSW Sensor Chips, NXP I-Code, STM ISO Chips, TI Tag-it
STANDARD CONFORMITY
ORDER DESCRIPTIONS ID ISC.MR200-EP
HF Mid Range Reader (RS232/LAN)
ID ISC.MR200-W
HF Mid Range Reader (RS232/WLAN)
Accessories: ID ISC.FW.HF.MR200-UID/OTP Firmware License
Radio licence Europe USA Canada EMC Safety Low Voltage Human Exposure Vibration Shock
EN 300 330 FCC 47 CFR Part 15 IC RSS-GEN, RSS-210 EN 301 489 EN 60950 EN 50364 EN 60068-2-6 10…150 Hz: 0,075 mm / 1 g EN 60068-2-27 acceleration: 30 g
FEIG ELECTRONIC reserves the right to change specification without notice at any time. State of information: June 2011.
