High-Speed Latching Continuity Tester
High-Speed Latching Continuity Tester ST-BL01Q The ENFORCER ST-BL01Q High-Speed Latching Continuity Tester allows testing of continuity over durations as low as 100ųs. Excellent for troubleshooting sensitive security systems, automotive electrical systems, and more.
Features:
Test N.O. and N.C. circuits Verify circuit continuity through beeper of visual indication Built-in LED light Three testing modes: - Real-time Tester will indicate whenever it is triggered - Auto-reset Tester will indicate continuously for 1 second after it is triggered - Latch mode Tester will indicate continuously after triggered, until the reset button is pressed 100ųs Sensitivity Optional belt clip included for easy transport Internal battery included
Specifications: Model Response time Continuity threshold Power Dimensions Weight
Sample Applications: ST-BL01Q 100ųs 3kΩ 9-Volt battery (included) 43/16”x3”x11/16” (105x75x27 mm) 3.5-oz (99g) 5.1-oz (144g) including 9-volt battery
Magnetic Contacts: When experiencing trouble with a magnetic contact, connect the tester to various points in the system using latch mode to help identify the trouble component. Vibration: To test components of a system exposed to frequent vibration or bending, connect the tester to various points in the system using latch mode. Shock/vibration sensors: Simplify installation and calibration by using the tester in place of an alarm panel or receiving device when adjusting sensitivity.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326 Website: www.seco-larm.com Email: [email protected]
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
PiST-BL01Q_1407.docx
Features:
Test N.O. and N.C. circuits Verify circuit continuity through beeper of visual indication Built-in LED light Three testing modes: - Real-time Tester will indicate whenever it is triggered - Auto-reset Tester will indicate continuously for 1 second after it is triggered - Latch mode Tester will indicate continuously after triggered, until the reset button is pressed 100ųs Sensitivity Optional belt clip included for easy transport Internal battery included
Specifications: Model Response time Continuity threshold Power Dimensions Weight
Sample Applications: ST-BL01Q 100ųs 3kΩ 9-Volt battery (included) 43/16”x3”x11/16” (105x75x27 mm) 3.5-oz (99g) 5.1-oz (144g) including 9-volt battery
Magnetic Contacts: When experiencing trouble with a magnetic contact, connect the tester to various points in the system using latch mode to help identify the trouble component. Vibration: To test components of a system exposed to frequent vibration or bending, connect the tester to various points in the system using latch mode. Shock/vibration sensors: Simplify installation and calibration by using the tester in place of an alarm panel or receiving device when adjusting sensitivity.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326 Website: www.seco-larm.com Email: [email protected]
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
PiST-BL01Q_1407.docx
