holemaking products
HOLEMAKING PRODUCTS Complete line of Holemaking Products and Accessories
HOLEMAKING PRODUCTS
I N T R O D U C I N G
Holemaking Products
Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related accessories, knockout punches, new levels, and a wider range of conduit cutting tools. Now Klein offers even more solutions for making holes in drywall and ceiling tile to help get the job done right. 2
HOLEMAKING PRODUCTS
High quality, long lasting products
that save time and effort on the job.
3
HOLEMAKING PRODUCTS
Flexible Drill Bits Flex Bit Augers
• Used to drill holes through wood within a wall. • Tapered back for easy bit retrieval. • Spring steel shaft resists deformation. • Screw point tip pulls the bit through wood. • Hole in tip allows for use with wire or cable pulling grip.
53719
53720
Cat. No.
Length
Weight (lbs.)
53719
53716 53717 53718 53719 53751 53720
3/8" x 54" 3/8" x 72" 9/16" x 54" 3/4" x 54" 3/4" x 72" 1" x 54"
1.00 1.00 1.00 2.00 2.00 2.00
53718
53716
Flex Bit Extensions 53722
• Connects to the end of a flex bit and extends the length. • For use with flex bits 3/4" and larger (Cat. No. 53722). • Connection diameter is 5/8" (Cat. No. 53722). • For use with flex bits 9/16" and smaller (Cat. No. 53723). • Connection diameter is 7/16" (Cat. No. 53723). Cat. No.
Length
Connection Diameter
Weight (lbs.)
53722 53723
54" 54"
5/8" 7/16"
1.00 1.00
Flex Bit Placement Tool olding design stores more • Fcompactly than standard tool. C ushion grip handle for • non-slip comfort. • For use with flexible drill bits. ositions flexible drill bits • Phorizontally or vertically
53715
within a wall.
Cat. No.
Weight (lbs.)
53715
1.00
All dimensions are in inches and (millimeters) unless otherwise specified.
4
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
Pulling Grips KPS050
KPS075
•
Clips to flex bit for pulling wire and cable up to 9/16" in diameter (Cat. No. KPS050); up to 1" (Cat. No. KPS075). Grip (Cat. No. KPS050) is used to pull up to 9/16" diameter wire, cable or fish tape through walls; grip (Cat. No. KPS075) up to 1". Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull. Swivel end helps reduce twisting.
• • •
Cat. No.
Capacity
Maximum Safe Load Weight (lbs.)
KPS050 KPS075
1/2" - 9/16" 3/4" - 1"
100 lb 185 lb
1.00 1.00
WARNING: Do not exceed maximum safe load as listed on the label attached to the product. WARNING: Always match proper size and type of grip to application.
HOLEMAKING PRODUCTS
Pulling Grips
WARNING: Always inspect equipment before use.
Flex Bit Kit Flex Bit Kit piece kit includes folding placement tool, 1/2"-9/16" O.D. • 3pulling grip and 9/16" x 54" flexible drill bit. E verything you need to pull up to 9/16" O.D. wire. • C omplete kit used for drilling and pulling wire and cable. • U se placement tool (Cat. No. 53715) to guide bit through walls. • F lexible drill bit (Cat. No. 53718) makes 9/16" holes in wood. • P ulling grip (Cat. KPS050) attaches to the flexible drill bit • after the hole hasNo. been made and pulls 1/2" – 9/16" wire and cable. Cat. No.
Kit Contains
Weight (lbs.)
53721
2.00 Cat. No. 53715
Description flex bit placement tool
53718
flex drill bit - 9/16" x 54"
KPS050
pulling grip - 1/2"–9/16"
53721 All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
5
HOLEMAKING PRODUCTS
Knockout Punches Knockout Punch Set
53727
53728
• Optimized design reduces wrench effort. • Slugs are split inside for easy removal. aximum capacity of 10 gauge mild steel. • M Also cuts aluminum, fiberglass and plastic. • Punches holes cleanly and accurately. • Set includes 1/2" or 3/4" punch and die with draw stud.
Cat. No.
Length
Conduit Size
Weight (lbs.)
53727 53728
4" 2-5/8"
3/4" (19 mm) 1/2" (12.5 mm)
1.00 1.00
Knockout Punch Set with Wrench includes: • S1"etratcheting wrench, knockout punches, dies and draw studs for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" conduit sizes. Cutting capacity 10 gauge mild steel; also cuts aluminum, fiberglass and plastic. Splits slugs for easy removal. Punches holes cleanly and accurately. Kit includes six different size knockout punches and dies, two draw studs and ratcheting box end wrench.
• • • •
53732
Cat. No.
Weight (lbs.)
53732
9.00 Description punch-die 1/2" punch-die 3/4" punch-die 1" punch-die 1-1/4" punch-die 1-1/2" punch-die 2" 1" ratcheting wrench
WARNING: Do NOT push or hammer wrench. WARNING: Do NOT extend handle length of wrench.
All dimensions are in inches and (millimeters) unless otherwise specified.
6
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
6" Electrician's Level
• Large, high visibility vials are easy to read. • Unique 3 point design holds securely to pipe. • Strong Rare Earth magnets firmly hold the level to ferrous metals. • For use in measuring bends in conduit. • Machined billet aluminum design. • High contrast laser etched markings for high visibility readings. Cat. No.
Overall Length
Weight (lbs.)
931-6RE
6"
1.00
931-6RE
9" Torpedo Level
• Large high visibility vials are easy to read. • Strong Rare Earth magnets firmly hold the level to ferrous metals. • Easy to read vials set for measurements at 0, 30, 45 and 90 degrees. • Machined billet aluminum design. • High contrast laser etched markings. Cat. No.
Overall Length
Weight (lbs.)
932-9RE
9"
1.00
HOLEMAKING PRODUCTS
Levels
932-9RE
Step Drill Bits Step Drills • Laser-etched hole sizes are easy to read and permanent. • Works in most metals, plastic and wood. • Self-starting Speedpoint™ tip starts six times faster. • Single-flute cutter for a true round hole every time. • Tri-lobe shank for firm grip in drill chuck. Cat. No. Quick Reference No. of Hole Size Range Number Sizes per Bit (Hole Diameter)
Pilot Hole Electric Depth Penetration Weight Required Drill Size for Each Step (lbs.)
59009
9
10 in 1/8" increments
1/4" to 1-3/8"
no
1/2" and larger
1/8"
.15
59014
14
12 in 1/16" increments
3/16" to 7/8"
no
3/8" and larger
1/8"
.60
59009
59014
Note: Read and follow safety instructions in power tool owner’s manual. SpeedpointTM is a registered trademark of Irwin Industrial Tools.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
7
HOLEMAKING PRODUCTS
Ship-Auger Bits Ship-Auger Bits with Screw Point 53441
• Bits drill through nails, wood, vinyl, plastics, and heavy timber. pecial bit steel with machine-ground flutes and polished edges for smooth, • Swobble-free boring. • Feed-screw pilot draws bit into wood. • Full length is heat-treated and tempered. • Deep, open-throat design clears chips for faster, cleaner cuts. • Shanks are 7/16" hex to fit 1/2" and larger three-jaw chucks. • Head and twist are ground to correct clearance for easy removal from hole. or heavy construction and repair work in mines, on docks and bridges, • Fand for electrical work. Cat. No.
Bit Size
Overall Length
Weight (lbs.)
53437 53439 53441
3/4" (19 mm) 7/8" (22 mm) 1" (25.4 mm)
18-1/2'' (470 mm) 18-1/2'' (470 mm) 18-3/4'' (476 mm)
2.00 2.00 2.00
Hole Saws Bi-Metal Recessed Light Hole Saw • For 6" recessed lights. • Makes precise holes in drywall and ceiling tile. • Recommended for most major brands of 6" recessed lighting fixtures. • For use in drywall, ceiling tile, steel, wood, plastic, stainless steel and cast iron. • Use with Klein Tools arbor Cat. No. 31670 or 31670-SEN (Sold separately). Cat. No.
Saw Diameter
For Use with Arbor No.
Weight (lbs.)
31600
6-3/8" (161 mm)
31670
2.00
31600
Hole Saw Arbor with Pins • 118° split point pilot bit. Use with Klein hole saws: 1-1/4" – 6-7/8". • Pins lock the saw to prevent over-tightening. • Hardened mandrel for long thread life. Cat. No.
Shank Style
Pins
31670
hexagonal threaded
Shank Size
Electric Drill Size
Thread Size
Weight (lbs.)
7/16" (11 mm)
1/2" & larger
5/8" - 18"
.55
All dimensions are in inches and (millimeters) unless otherwise specified.
8
WARNING: Always wear approved eye protection.
31670
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
Quick Cutter® Adjustable Hole Saw djustable saw cuts • A2-1/2" – 7" holes. arbide coated blades for longer • Cblade life. • Cuts holes in drywall and ceiling tile. ole saw blades adjust to cut holes • Hfrom 2 -1/2" to 7" in diameter. L ong-life carbide coated blades. • D ust shield included. • Cat. No.
Range
Weight (lbs.)
53731
2-1/2" - 7"
1.00
53731
Quick Cutter® is a registered trademark of Speare Tools.
Jab Saw
Jab Saw • Cuts drywall, wallboard, plywood, and plastic. • Triple ground teeth for a fast cut. • Blade cuts in both directions (push and pull). • Hardened, carbon steel blade for durability. • H ardened, beveled blade point for scoring and plunge cuts. • Comfort-cushion grip with thumb groove. • Handle structure designed for strength and durability. • Flat-end grip for palming or punching through drywall. Cat. No.
Blade Length
Overall Length
Weight (lbs.)
725
6" (152 mm)
12" (305 mm)
.90
725
HOLEMAKING PRODUCTS
Hole Saws
WARNING: Never use blade as a prying device as blades may break & cause injury.
Hole Saw Kit 8 Piece Hole Saw Kit • 8 piece set contains the most popular sizes for electrical work. aw diameters are 7/8" (22 mm), 1-1/8" (29 mm), • S1-3/8" (35 mm), 1-3/4" (44 mm), 2" (51 mm),
•
and 2-1/2" (64 mm). Packed in a rust-proof, plastic molded carrying case.
Cat. No. Kit Contains
Weight (lbs.)
31630
3.00 Cat. No. 31514
Size 7/8"
31518
1-1/8'
31522
1-3/8"
31528
1-3/4"
31532
2"
31540
2-1/2'
31660
arbor
31670
arbor 31630
WARNING: Always ensure that you and persons in the vicinity
wear approved eye protection.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
Set pilot drill point 1/8" beyond tooth points.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
9
HOLEMAKING PRODUCTS
Armored Cable Cutter BX and Armored Cable Cutter • Cuts BX and 3/8" armored cable. • Eliminates burrs. • Does not nick cable. asily cuts 3/8" flexible conduit and #10, 12, and 14 armored • Ecables with up to 4 wires with a couple of turns of the handle. • Depth of cut adjusts between standard MC and reduced diameter MC. • Extra blade storage in handle. se with Klein Tools replacement blade • UCat. No. 53726 or 53726-SEN. Cat. No.
Weight (lbs.)
53725
2.00
53725
BX Cutter Replacement Blade eplacement blade for use with • RKlein Tools cable cutter
Cat. No. 53725 or Cat. No. 53725-SEN.
Cat. No.
Weight (lbs.)
53726
.1
53726
Cable Cutter Utility Cable Cutter hear-type hook jaws grab and • Shold cable while shear-cutting
action makes clean cuts. Forged steel with black-oxide finish for long life. Beveled tips for positive mating. Hinge bolt with pin-set nut for proper blade tension. Not designed for cutting steel or ACSR. Maximum cable cutting 350 MCM copper and aluminum. Non-slip vinyl grips.
• • • • • •
63035
Cat. No. Overall Length
MCM Cable-Cutting Maximum Capacity
Handle Color
Weight (lbs.)
63035
350 copper, 350 aluminum
red
3.00
16-3/4" (425 mm)
Tubing Cutter Electrician’s Tubing Cutter atented cutting wheel cuts and • Pcleanly snaps the conduit without leaving a burr inside.
an be used to cut conduit with • Cwire – no wire damage. sed for cutting 1/2" and 3/4" • UEMT Conduit. E asy to use – tighten handle, • cut the circumference of the conduit, snap the conduit.
All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified.
10
WARNING: Always wear approved eye protection.
53730
Cat. No.
Length
Conduit Diameter
Weight (lbs.)
53730
7" - 8-1/4"
cuts 1/2" and 3/4" EMT conduit
2.00
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety in power circuits. tool owner's manual. WARNING: Never use on orinstructions near live electrical
PVC Cutter • Cuts up to 3/4" schedule 40 PVC. akes clean burr-free cuts in PVC • M and flexible pipe. • Reversible blade doubles life. • Cuts 1-3/8" O.D. flexible plastic pipe. • Steel construction for strength. • Guide helps cut pipe squarely. • Handle latch keeps tool closed. Cat. No.
PVC Capacity
Flexible Pipe Capacity
Weight (lbs.)
50506
3/4" schedule 40
1-3/8"
1.00
50506
WARNING: Do NOT use to cut metallic pipes or cable wire. WARNING: Do NOT cut cold PVC.
Fasteners
HOLEMAKING PRODUCTS
PVC Cutting
Conical Anchor Kit – 100 Fasteners it contains: • K100 #2 Phillips, #10 x 1" Screws,
•
and 100 wall anchors. Masonry drill bit also included.
Cat. No.
Anchor Size
Screw Size
Bit Size
Weight (lbs.)
53729
#10 - 12
#10 x 1"
1/4"
1.00
53729
All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety in power circuits. tool owner's manual. WARNING: Never use on orinstructions near live electrical
11
Introducing...Holemaking Products Klein carries an extensive selection of Holemaking tools and accessories. These top-of-the-line products provide accuracy, consistency, strength and long lasting performance to meet the needs of professionals. View a complete selection in our catalog or online @ kleintools.com.
F o r
P r o f e s s i o n a l s . . . S i n c e
1 8 5 7
®
www.kleintools.com Klein Tools, Inc. • 450 Bond Street • Lincolnshire, IL 60069-1418 Phone: 847-821-5500 • Toll free: 800-553-4676 • fax: 800-553-4876 © 2009 Klein Tools, Inc.
Printed in U.S.A.
99815
HOLEMAKING PRODUCTS
I N T R O D U C I N G
Holemaking Products
Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related accessories, knockout punches, new levels, and a wider range of conduit cutting tools. Now Klein offers even more solutions for making holes in drywall and ceiling tile to help get the job done right. 2
HOLEMAKING PRODUCTS
High quality, long lasting products
that save time and effort on the job.
3
HOLEMAKING PRODUCTS
Flexible Drill Bits Flex Bit Augers
• Used to drill holes through wood within a wall. • Tapered back for easy bit retrieval. • Spring steel shaft resists deformation. • Screw point tip pulls the bit through wood. • Hole in tip allows for use with wire or cable pulling grip.
53719
53720
Cat. No.
Length
Weight (lbs.)
53719
53716 53717 53718 53719 53751 53720
3/8" x 54" 3/8" x 72" 9/16" x 54" 3/4" x 54" 3/4" x 72" 1" x 54"
1.00 1.00 1.00 2.00 2.00 2.00
53718
53716
Flex Bit Extensions 53722
• Connects to the end of a flex bit and extends the length. • For use with flex bits 3/4" and larger (Cat. No. 53722). • Connection diameter is 5/8" (Cat. No. 53722). • For use with flex bits 9/16" and smaller (Cat. No. 53723). • Connection diameter is 7/16" (Cat. No. 53723). Cat. No.
Length
Connection Diameter
Weight (lbs.)
53722 53723
54" 54"
5/8" 7/16"
1.00 1.00
Flex Bit Placement Tool olding design stores more • Fcompactly than standard tool. C ushion grip handle for • non-slip comfort. • For use with flexible drill bits. ositions flexible drill bits • Phorizontally or vertically
53715
within a wall.
Cat. No.
Weight (lbs.)
53715
1.00
All dimensions are in inches and (millimeters) unless otherwise specified.
4
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
Pulling Grips KPS050
KPS075
•
Clips to flex bit for pulling wire and cable up to 9/16" in diameter (Cat. No. KPS050); up to 1" (Cat. No. KPS075). Grip (Cat. No. KPS050) is used to pull up to 9/16" diameter wire, cable or fish tape through walls; grip (Cat. No. KPS075) up to 1". Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull. Swivel end helps reduce twisting.
• • •
Cat. No.
Capacity
Maximum Safe Load Weight (lbs.)
KPS050 KPS075
1/2" - 9/16" 3/4" - 1"
100 lb 185 lb
1.00 1.00
WARNING: Do not exceed maximum safe load as listed on the label attached to the product. WARNING: Always match proper size and type of grip to application.
HOLEMAKING PRODUCTS
Pulling Grips
WARNING: Always inspect equipment before use.
Flex Bit Kit Flex Bit Kit piece kit includes folding placement tool, 1/2"-9/16" O.D. • 3pulling grip and 9/16" x 54" flexible drill bit. E verything you need to pull up to 9/16" O.D. wire. • C omplete kit used for drilling and pulling wire and cable. • U se placement tool (Cat. No. 53715) to guide bit through walls. • F lexible drill bit (Cat. No. 53718) makes 9/16" holes in wood. • P ulling grip (Cat. KPS050) attaches to the flexible drill bit • after the hole hasNo. been made and pulls 1/2" – 9/16" wire and cable. Cat. No.
Kit Contains
Weight (lbs.)
53721
2.00 Cat. No. 53715
Description flex bit placement tool
53718
flex drill bit - 9/16" x 54"
KPS050
pulling grip - 1/2"–9/16"
53721 All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
5
HOLEMAKING PRODUCTS
Knockout Punches Knockout Punch Set
53727
53728
• Optimized design reduces wrench effort. • Slugs are split inside for easy removal. aximum capacity of 10 gauge mild steel. • M Also cuts aluminum, fiberglass and plastic. • Punches holes cleanly and accurately. • Set includes 1/2" or 3/4" punch and die with draw stud.
Cat. No.
Length
Conduit Size
Weight (lbs.)
53727 53728
4" 2-5/8"
3/4" (19 mm) 1/2" (12.5 mm)
1.00 1.00
Knockout Punch Set with Wrench includes: • S1"etratcheting wrench, knockout punches, dies and draw studs for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" conduit sizes. Cutting capacity 10 gauge mild steel; also cuts aluminum, fiberglass and plastic. Splits slugs for easy removal. Punches holes cleanly and accurately. Kit includes six different size knockout punches and dies, two draw studs and ratcheting box end wrench.
• • • •
53732
Cat. No.
Weight (lbs.)
53732
9.00 Description punch-die 1/2" punch-die 3/4" punch-die 1" punch-die 1-1/4" punch-die 1-1/2" punch-die 2" 1" ratcheting wrench
WARNING: Do NOT push or hammer wrench. WARNING: Do NOT extend handle length of wrench.
All dimensions are in inches and (millimeters) unless otherwise specified.
6
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
6" Electrician's Level
• Large, high visibility vials are easy to read. • Unique 3 point design holds securely to pipe. • Strong Rare Earth magnets firmly hold the level to ferrous metals. • For use in measuring bends in conduit. • Machined billet aluminum design. • High contrast laser etched markings for high visibility readings. Cat. No.
Overall Length
Weight (lbs.)
931-6RE
6"
1.00
931-6RE
9" Torpedo Level
• Large high visibility vials are easy to read. • Strong Rare Earth magnets firmly hold the level to ferrous metals. • Easy to read vials set for measurements at 0, 30, 45 and 90 degrees. • Machined billet aluminum design. • High contrast laser etched markings. Cat. No.
Overall Length
Weight (lbs.)
932-9RE
9"
1.00
HOLEMAKING PRODUCTS
Levels
932-9RE
Step Drill Bits Step Drills • Laser-etched hole sizes are easy to read and permanent. • Works in most metals, plastic and wood. • Self-starting Speedpoint™ tip starts six times faster. • Single-flute cutter for a true round hole every time. • Tri-lobe shank for firm grip in drill chuck. Cat. No. Quick Reference No. of Hole Size Range Number Sizes per Bit (Hole Diameter)
Pilot Hole Electric Depth Penetration Weight Required Drill Size for Each Step (lbs.)
59009
9
10 in 1/8" increments
1/4" to 1-3/8"
no
1/2" and larger
1/8"
.15
59014
14
12 in 1/16" increments
3/16" to 7/8"
no
3/8" and larger
1/8"
.60
59009
59014
Note: Read and follow safety instructions in power tool owner’s manual. SpeedpointTM is a registered trademark of Irwin Industrial Tools.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
7
HOLEMAKING PRODUCTS
Ship-Auger Bits Ship-Auger Bits with Screw Point 53441
• Bits drill through nails, wood, vinyl, plastics, and heavy timber. pecial bit steel with machine-ground flutes and polished edges for smooth, • Swobble-free boring. • Feed-screw pilot draws bit into wood. • Full length is heat-treated and tempered. • Deep, open-throat design clears chips for faster, cleaner cuts. • Shanks are 7/16" hex to fit 1/2" and larger three-jaw chucks. • Head and twist are ground to correct clearance for easy removal from hole. or heavy construction and repair work in mines, on docks and bridges, • Fand for electrical work. Cat. No.
Bit Size
Overall Length
Weight (lbs.)
53437 53439 53441
3/4" (19 mm) 7/8" (22 mm) 1" (25.4 mm)
18-1/2'' (470 mm) 18-1/2'' (470 mm) 18-3/4'' (476 mm)
2.00 2.00 2.00
Hole Saws Bi-Metal Recessed Light Hole Saw • For 6" recessed lights. • Makes precise holes in drywall and ceiling tile. • Recommended for most major brands of 6" recessed lighting fixtures. • For use in drywall, ceiling tile, steel, wood, plastic, stainless steel and cast iron. • Use with Klein Tools arbor Cat. No. 31670 or 31670-SEN (Sold separately). Cat. No.
Saw Diameter
For Use with Arbor No.
Weight (lbs.)
31600
6-3/8" (161 mm)
31670
2.00
31600
Hole Saw Arbor with Pins • 118° split point pilot bit. Use with Klein hole saws: 1-1/4" – 6-7/8". • Pins lock the saw to prevent over-tightening. • Hardened mandrel for long thread life. Cat. No.
Shank Style
Pins
31670
hexagonal threaded
Shank Size
Electric Drill Size
Thread Size
Weight (lbs.)
7/16" (11 mm)
1/2" & larger
5/8" - 18"
.55
All dimensions are in inches and (millimeters) unless otherwise specified.
8
WARNING: Always wear approved eye protection.
31670
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
Quick Cutter® Adjustable Hole Saw djustable saw cuts • A2-1/2" – 7" holes. arbide coated blades for longer • Cblade life. • Cuts holes in drywall and ceiling tile. ole saw blades adjust to cut holes • Hfrom 2 -1/2" to 7" in diameter. L ong-life carbide coated blades. • D ust shield included. • Cat. No.
Range
Weight (lbs.)
53731
2-1/2" - 7"
1.00
53731
Quick Cutter® is a registered trademark of Speare Tools.
Jab Saw
Jab Saw • Cuts drywall, wallboard, plywood, and plastic. • Triple ground teeth for a fast cut. • Blade cuts in both directions (push and pull). • Hardened, carbon steel blade for durability. • H ardened, beveled blade point for scoring and plunge cuts. • Comfort-cushion grip with thumb groove. • Handle structure designed for strength and durability. • Flat-end grip for palming or punching through drywall. Cat. No.
Blade Length
Overall Length
Weight (lbs.)
725
6" (152 mm)
12" (305 mm)
.90
725
HOLEMAKING PRODUCTS
Hole Saws
WARNING: Never use blade as a prying device as blades may break & cause injury.
Hole Saw Kit 8 Piece Hole Saw Kit • 8 piece set contains the most popular sizes for electrical work. aw diameters are 7/8" (22 mm), 1-1/8" (29 mm), • S1-3/8" (35 mm), 1-3/4" (44 mm), 2" (51 mm),
•
and 2-1/2" (64 mm). Packed in a rust-proof, plastic molded carrying case.
Cat. No. Kit Contains
Weight (lbs.)
31630
3.00 Cat. No. 31514
Size 7/8"
31518
1-1/8'
31522
1-3/8"
31528
1-3/4"
31532
2"
31540
2-1/2'
31660
arbor
31670
arbor 31630
WARNING: Always ensure that you and persons in the vicinity
wear approved eye protection.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
Set pilot drill point 1/8" beyond tooth points.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety instructions in power tool owner's manual.
9
HOLEMAKING PRODUCTS
Armored Cable Cutter BX and Armored Cable Cutter • Cuts BX and 3/8" armored cable. • Eliminates burrs. • Does not nick cable. asily cuts 3/8" flexible conduit and #10, 12, and 14 armored • Ecables with up to 4 wires with a couple of turns of the handle. • Depth of cut adjusts between standard MC and reduced diameter MC. • Extra blade storage in handle. se with Klein Tools replacement blade • UCat. No. 53726 or 53726-SEN. Cat. No.
Weight (lbs.)
53725
2.00
53725
BX Cutter Replacement Blade eplacement blade for use with • RKlein Tools cable cutter
Cat. No. 53725 or Cat. No. 53725-SEN.
Cat. No.
Weight (lbs.)
53726
.1
53726
Cable Cutter Utility Cable Cutter hear-type hook jaws grab and • Shold cable while shear-cutting
action makes clean cuts. Forged steel with black-oxide finish for long life. Beveled tips for positive mating. Hinge bolt with pin-set nut for proper blade tension. Not designed for cutting steel or ACSR. Maximum cable cutting 350 MCM copper and aluminum. Non-slip vinyl grips.
• • • • • •
63035
Cat. No. Overall Length
MCM Cable-Cutting Maximum Capacity
Handle Color
Weight (lbs.)
63035
350 copper, 350 aluminum
red
3.00
16-3/4" (425 mm)
Tubing Cutter Electrician’s Tubing Cutter atented cutting wheel cuts and • Pcleanly snaps the conduit without leaving a burr inside.
an be used to cut conduit with • Cwire – no wire damage. sed for cutting 1/2" and 3/4" • UEMT Conduit. E asy to use – tighten handle, • cut the circumference of the conduit, snap the conduit.
All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified.
10
WARNING: Always wear approved eye protection.
53730
Cat. No.
Length
Conduit Diameter
Weight (lbs.)
53730
7" - 8-1/4"
cuts 1/2" and 3/4" EMT conduit
2.00
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety in power circuits. tool owner's manual. WARNING: Never use on orinstructions near live electrical
PVC Cutter • Cuts up to 3/4" schedule 40 PVC. akes clean burr-free cuts in PVC • M and flexible pipe. • Reversible blade doubles life. • Cuts 1-3/8" O.D. flexible plastic pipe. • Steel construction for strength. • Guide helps cut pipe squarely. • Handle latch keeps tool closed. Cat. No.
PVC Capacity
Flexible Pipe Capacity
Weight (lbs.)
50506
3/4" schedule 40
1-3/8"
1.00
50506
WARNING: Do NOT use to cut metallic pipes or cable wire. WARNING: Do NOT cut cold PVC.
Fasteners
HOLEMAKING PRODUCTS
PVC Cutting
Conical Anchor Kit – 100 Fasteners it contains: • K100 #2 Phillips, #10 x 1" Screws,
•
and 100 wall anchors. Masonry drill bit also included.
Cat. No.
Anchor Size
Screw Size
Bit Size
Weight (lbs.)
53729
#10 - 12
#10 x 1"
1/4"
1.00
53729
All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits. NOTE: Read and follow safety in power circuits. tool owner's manual. WARNING: Never use on orinstructions near live electrical
11
Introducing...Holemaking Products Klein carries an extensive selection of Holemaking tools and accessories. These top-of-the-line products provide accuracy, consistency, strength and long lasting performance to meet the needs of professionals. View a complete selection in our catalog or online @ kleintools.com.
F o r
P r o f e s s i o n a l s . . . S i n c e
1 8 5 7
®
www.kleintools.com Klein Tools, Inc. • 450 Bond Street • Lincolnshire, IL 60069-1418 Phone: 847-821-5500 • Toll free: 800-553-4676 • fax: 800-553-4876 © 2009 Klein Tools, Inc.
Printed in U.S.A.
99815
