How to access the 2006 Honda Shadow Spirit 750 toolbox
How to access the 2006 Honda Shadow Spirit 750 toolbox
How to access the 2006 Honda Shadow Spirit 750 toolbox Retrieving the tools located in the hidden toolbox on the motorbike.
Geschreven door: Dazarene Cascio
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 1 van 3
How to access the 2006 Honda Shadow Spirit 750 toolbox
INTRODUCTIE To perform maintenance on the motorbike, tools are required. There is a storage compartment located on the motorbike that will hold the necessary tools. You can also add to this arsenal by adding others. NOTE: The tool box is located on the left side of the bike (opposite the tail pipe)
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 2 van 3
How to access the 2006 Honda Shadow Spirit 750 toolbox
Stap 1 — Remove outer casing
Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
Stap 2 — Open toolbox
The tool box is located under the panel.
Using the key to the motorbike, unlock the tool box.
Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
To reassemble your device, follow these instructions in reverse order. Dit document is voor het laatst gegenereerd op 2017-09-03 03:29:29 PM.
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 3 van 3
How to access the 2006 Honda Shadow Spirit 750 toolbox Retrieving the tools located in the hidden toolbox on the motorbike.
Geschreven door: Dazarene Cascio
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 1 van 3
How to access the 2006 Honda Shadow Spirit 750 toolbox
INTRODUCTIE To perform maintenance on the motorbike, tools are required. There is a storage compartment located on the motorbike that will hold the necessary tools. You can also add to this arsenal by adding others. NOTE: The tool box is located on the left side of the bike (opposite the tail pipe)
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 2 van 3
How to access the 2006 Honda Shadow Spirit 750 toolbox
Stap 1 — Remove outer casing
Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
Stap 2 — Open toolbox
The tool box is located under the panel.
Using the key to the motorbike, unlock the tool box.
Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
To reassemble your device, follow these instructions in reverse order. Dit document is voor het laatst gegenereerd op 2017-09-03 03:29:29 PM.
© iFixit — CC BY-NC-SA
nl.iFixit.com
Pagina 3 van 3
