Improve Accuracy in 3D Flow
Improve Accuracy in 3D Flow
© 2014 Autodesk
Mesh Guidelines 1) When increasing layers decrease global edge length. Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 2) Refine surface mesh at gate location for Direct injection Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 3) More elements through thickness for gates closer to the edge or on the edge of the part Bad Preferred
© 2014 Autodesk
Mesh Guidelines 4) Refine side walls for gates closer to the edge or on the edge of the part Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 5) Avoid larger elements next to smaller elements Bad
© 2014 Autodesk
Preferred
Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2014 Autodesk, Inc. All rights reserved.
© 2014 Autodesk
Mesh Guidelines 1) When increasing layers decrease global edge length. Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 2) Refine surface mesh at gate location for Direct injection Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 3) More elements through thickness for gates closer to the edge or on the edge of the part Bad Preferred
© 2014 Autodesk
Mesh Guidelines 4) Refine side walls for gates closer to the edge or on the edge of the part Bad
© 2014 Autodesk
Preferred
Mesh Guidelines 5) Avoid larger elements next to smaller elements Bad
© 2014 Autodesk
Preferred
Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2014 Autodesk, Inc. All rights reserved.
