Install drivers for the Monoprice Drawing Tablet
Install drivers for the Monoprice Drawing Tablet
calpolyad Install drivers for the Monoprice Drawing Tablet Written By: Matt Corippo
© 2017
calpolyad.dozuki.com
Page 1 of 4
Install drivers for the Monoprice Drawing Tablet
INTRODUCTION Follow this guide to install drivers for the recommended Monoprice drawing tablet. Use the drivers from the CD that came with your tablet, or download them from the Art & Design file server while in the department, or see your instructor or IT support tech. Monoprice has different drivers for different models, so be sure you have the correct drivers for your tablet. These instructions are for the supported/recommended 8" x 6" Monoprice tablet. Install the drivers before connecting the tablet to your Mac.
© 2017
calpolyad.dozuki.com
Page 2 of 4
Install drivers for the Monoprice Drawing Tablet
Step 1 — Locate Tablet drivers If you don't have the original files, They are also located here: FileStorage/• Software & Tools/Monoprice 8 x 6 Tablet Mac Drivers
Log into any A&D lab computer to get access to FileStorage.
Copy the entire Monoprice 8 x 6 Tablet Mac Tools folder to your computer (flash drive, cloud storage, etc.)
Open Mac OS X Driver and Software Installer, then open Mac OS X, and then double click on TouchTablet Installer-Monoprice 1.0.pkg to run the driver installer.
Complete the installer, and the TouchTablet Application should open. Plug in your tablet USB cable to adjust settings.
Step 2 — Install Mac Tablet drivers
The TouchTablet Application can be found in the Applications folder.
If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy. This document was last generated on 2017-06-23 11:51:32 AM.
© 2017
calpolyad.dozuki.com
Page 3 of 4
Install drivers for the Monoprice Drawing Tablet
© 2017
calpolyad.dozuki.com
Page 4 of 4
calpolyad Install drivers for the Monoprice Drawing Tablet Written By: Matt Corippo
© 2017
calpolyad.dozuki.com
Page 1 of 4
Install drivers for the Monoprice Drawing Tablet
INTRODUCTION Follow this guide to install drivers for the recommended Monoprice drawing tablet. Use the drivers from the CD that came with your tablet, or download them from the Art & Design file server while in the department, or see your instructor or IT support tech. Monoprice has different drivers for different models, so be sure you have the correct drivers for your tablet. These instructions are for the supported/recommended 8" x 6" Monoprice tablet. Install the drivers before connecting the tablet to your Mac.
© 2017
calpolyad.dozuki.com
Page 2 of 4
Install drivers for the Monoprice Drawing Tablet
Step 1 — Locate Tablet drivers If you don't have the original files, They are also located here: FileStorage/• Software & Tools/Monoprice 8 x 6 Tablet Mac Drivers
Log into any A&D lab computer to get access to FileStorage.
Copy the entire Monoprice 8 x 6 Tablet Mac Tools folder to your computer (flash drive, cloud storage, etc.)
Open Mac OS X Driver and Software Installer, then open Mac OS X, and then double click on TouchTablet Installer-Monoprice 1.0.pkg to run the driver installer.
Complete the installer, and the TouchTablet Application should open. Plug in your tablet USB cable to adjust settings.
Step 2 — Install Mac Tablet drivers
The TouchTablet Application can be found in the Applications folder.
If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy. This document was last generated on 2017-06-23 11:51:32 AM.
© 2017
calpolyad.dozuki.com
Page 3 of 4
Install drivers for the Monoprice Drawing Tablet
© 2017
calpolyad.dozuki.com
Page 4 of 4
