installation instructions ea100 exit annunciator - Access Hardware ...
801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS EA100 EXIT ANNUNCIATOR
The SDC Exit Annunuciator is a highly visible multi-color signal device that interfaces with Delayed Egress or standard EMLocks plus many other manufactures electromagnetic locks. It can also be wall ,ceiling or frame mounted. The EA100 may also be connected to other devices to serve as an external visual indicator . TM
Specifications:
Features: Easy to install Suitable for retrofit or new construction Multi color LED technology
Externally selectable color modes of RED, Green, Blue, White, Yellow and Purple. Externally selectable Solid or Flashing modes.
Dimensions: 8-3/4” X 1-1/2” X 3/4” Electrical: 12/24VDC @ 80/100mA Max. Power Long life LED output: 3 Primary colors, Red, Blue, Green (solid or chasing)
Operation: Applying 12vdc or 24vdc power and activating a control wire will turn on the associated primary color (Red, Green, Blue). Activating two colors at the same time will produce secondary colors (Violet, Yellow ,Blue/Green) . Activating all three colors will produce White. Activating the Chase wire will cause the color(s) that are selected to flash.
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected] P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 1
APPLICATIONS Ceiling Mount
Frame Mount
Lock Mount
Wall Mount
OPTIONAL MOUNTING
Single Gang Box Single Gang Plate
Drill hole into junction area for power wire routing and all LED connections Use double sided tape or screws to mount bracket in your selected location or on an magnetic lock. Snap EA100 circuit board onto mounting bracket. Connect wiring then install lens cover.
Base Circuit Board Lens Cover
P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 2
Electric Lock
Lock Status Sensor(s) [BAS, BPS+DPS,etc)
Secure
Not Secure
BLK RED GRN ORG WHT
12VDC OR 24VDC POWER SUPPLY +
BLU
RED - The door is locked and secure. GRN – Door not secure or access control has granted access.
+ -
Solenoid or coil
EA100 Access Control (N/C)
Fig. 1
Electric Strike (with monitoring)
DOOR OPEN
KEEPER OR CAM MONITOR
COM
DOOR CLOSED
RED - The door is locked and secure. GRN – Door not secure or access control has granted access.
Door Position Switch
Secure
Not Secure
MOV
12VDC OR 24VDC POWER + SUPPLY
BLU
+ -
BLK RED GRN ORG WHT
Solenoid or coil
EA100
[n/c]
[n/o]
Access Control (Fail Safe)
Access Control (Fail Secure)
Fig. 2 Chase
White
Blue
Blue
Green
Green
Red
Orange
Connecting a control wire to negative (-) of the power supply will turn on the associated color. Connecting the white wire to negative will cause the selected color(s) to flash.
Black Red
Pigtail
12VDC OR 24VDC POWER SUPPLY +
EA100
Fig. 3 P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 3
Typical Delayed Egress Applications J7
[ PWR ]
[EXT SPKR]
[ FP ]
[GRN RLY]
[ LOCK ]
[RED RLY]
[RM TRIG]
[RESET]
[REX]
[IBO]
[
NO C
NO C
NO C
NO C
DPS
]
[
BAS
]
J6 J2 -
+
C NC
-
NO C
+
NC NO
NO C
C NC
NC NO
C NC
+
BLK RED GRN ORG WHT
12VDC OR 24VDC POWER SUPPLY
BLU
1511S
EA100
J1B
Fig. 4
O F F 1 3
J1A
2 4
ROCKER DOWN
1581S
DPS OUT
EA100 Operation
ORG BRN YEL RED BLK
Red -
BLK RED
GRN
ORG
BLU WHT
Amber - The unit is in the alarmed countdown cycle.
MAIN CABLE
+
Green - The door is locked and secure.
The unit is in alarm and the door is unlocked.
12VDC OR 24VDC POWER SUPPLY
EA100
Fig. 5 Note: Both the Orange and White wire can be wired to the same connection for enhanced visibility.
101-DE / 101-KDE PWR LOCK RED RLY GRN RLY - +
- + NO C NCNO C NC C NO C NO C NO
WHT BLU
ORG GRN
BLK
+ RED
12VDC OR 24VDC POWER SUPPLY
TRIG REX RESET
EA100
Fig. 6 P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 4
INSTALLATION INSTRUCTIONS EA100 EXIT ANNUNCIATOR
The SDC Exit Annunuciator is a highly visible multi-color signal device that interfaces with Delayed Egress or standard EMLocks plus many other manufactures electromagnetic locks. It can also be wall ,ceiling or frame mounted. The EA100 may also be connected to other devices to serve as an external visual indicator . TM
Specifications:
Features: Easy to install Suitable for retrofit or new construction Multi color LED technology
Externally selectable color modes of RED, Green, Blue, White, Yellow and Purple. Externally selectable Solid or Flashing modes.
Dimensions: 8-3/4” X 1-1/2” X 3/4” Electrical: 12/24VDC @ 80/100mA Max. Power Long life LED output: 3 Primary colors, Red, Blue, Green (solid or chasing)
Operation: Applying 12vdc or 24vdc power and activating a control wire will turn on the associated primary color (Red, Green, Blue). Activating two colors at the same time will produce secondary colors (Violet, Yellow ,Blue/Green) . Activating all three colors will produce White. Activating the Chase wire will cause the color(s) that are selected to flash.
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected] P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 1
APPLICATIONS Ceiling Mount
Frame Mount
Lock Mount
Wall Mount
OPTIONAL MOUNTING
Single Gang Box Single Gang Plate
Drill hole into junction area for power wire routing and all LED connections Use double sided tape or screws to mount bracket in your selected location or on an magnetic lock. Snap EA100 circuit board onto mounting bracket. Connect wiring then install lens cover.
Base Circuit Board Lens Cover
P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 2
Electric Lock
Lock Status Sensor(s) [BAS, BPS+DPS,etc)
Secure
Not Secure
BLK RED GRN ORG WHT
12VDC OR 24VDC POWER SUPPLY +
BLU
RED - The door is locked and secure. GRN – Door not secure or access control has granted access.
+ -
Solenoid or coil
EA100 Access Control (N/C)
Fig. 1
Electric Strike (with monitoring)
DOOR OPEN
KEEPER OR CAM MONITOR
COM
DOOR CLOSED
RED - The door is locked and secure. GRN – Door not secure or access control has granted access.
Door Position Switch
Secure
Not Secure
MOV
12VDC OR 24VDC POWER + SUPPLY
BLU
+ -
BLK RED GRN ORG WHT
Solenoid or coil
EA100
[n/c]
[n/o]
Access Control (Fail Safe)
Access Control (Fail Secure)
Fig. 2 Chase
White
Blue
Blue
Green
Green
Red
Orange
Connecting a control wire to negative (-) of the power supply will turn on the associated color. Connecting the white wire to negative will cause the selected color(s) to flash.
Black Red
Pigtail
12VDC OR 24VDC POWER SUPPLY +
EA100
Fig. 3 P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 3
Typical Delayed Egress Applications J7
[ PWR ]
[EXT SPKR]
[ FP ]
[GRN RLY]
[ LOCK ]
[RED RLY]
[RM TRIG]
[RESET]
[REX]
[IBO]
[
NO C
NO C
NO C
NO C
DPS
]
[
BAS
]
J6 J2 -
+
C NC
-
NO C
+
NC NO
NO C
C NC
NC NO
C NC
+
BLK RED GRN ORG WHT
12VDC OR 24VDC POWER SUPPLY
BLU
1511S
EA100
J1B
Fig. 4
O F F 1 3
J1A
2 4
ROCKER DOWN
1581S
DPS OUT
EA100 Operation
ORG BRN YEL RED BLK
Red -
BLK RED
GRN
ORG
BLU WHT
Amber - The unit is in the alarmed countdown cycle.
MAIN CABLE
+
Green - The door is locked and secure.
The unit is in alarm and the door is unlocked.
12VDC OR 24VDC POWER SUPPLY
EA100
Fig. 5 Note: Both the Orange and White wire can be wired to the same connection for enhanced visibility.
101-DE / 101-KDE PWR LOCK RED RLY GRN RLY - +
- + NO C NCNO C NC C NO C NO C NO
WHT BLU
ORG GRN
BLK
+ RED
12VDC OR 24VDC POWER SUPPLY
TRIG REX RESET
EA100
Fig. 6 P:\INSTALLATION INST\ACCESSORIES\INST-EA100.vsd
REV -
12-13
Page 4
