iPhone 6 Plus Logic Board Assembly Replacement

iPhone 6 Plus Logic Board Assembly Replacement

iPhone 6 Plus Logic Board Assembly Replacement Prereq only.

Written By: Walter Galan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

iPhone 6 Plus Logic Board Assembly Replacement

INTRODUCTION Prereq only.

TOOLS: Phillips #000 Screwdriver (1) Tweezers (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

iPhone 6 Plus Logic Board Assembly Replacement

Step 1 — Logic Board Assembly 

Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.



Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

iPhone 6 Plus Logic Board Assembly Replacement

Step 3



Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.

Step 4 

© iFixit — CC BY-NC-SA

www.iFixit.com

Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.

Page 4 of 5

iPhone 6 Plus Logic Board Assembly Replacement

Step 5



Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-20 01:58:41 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5