iRobot Roomba 4100 Filter Replacement
iRobot Roomba 4100 Filter Replacement
iRobot Roomba 4100 Filter Replacement This is a guide for either cleaning or replacement of the filter in the Red Roomba 4100.
Written By: Samantha Barrett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
iRobot Roomba 4100 Filter Replacement
INTRODUCTION This guide is fairly easy. It requires no tools and will only take about 5 minutes.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
iRobot Roomba 4100 Filter Replacement
Step 1 — Filter
Lay the Roomba on a flat surface with the red side up.
Step 2
Push in the red, gumdrop-shaped button with your thumb.
While holding in the button, slide the back piece away from the main body of the Roomba.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
iRobot Roomba 4100 Filter Replacement
Step 3
Flip the back piece over in your hand.
Using your other hand, grab the yellow tab and pull it away from the back piece.
Step 4
Pinch the black plastic of the filter and pull it away from the yellow filter holder.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 11:45:47 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
iRobot Roomba 4100 Filter Replacement This is a guide for either cleaning or replacement of the filter in the Red Roomba 4100.
Written By: Samantha Barrett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
iRobot Roomba 4100 Filter Replacement
INTRODUCTION This guide is fairly easy. It requires no tools and will only take about 5 minutes.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
iRobot Roomba 4100 Filter Replacement
Step 1 — Filter
Lay the Roomba on a flat surface with the red side up.
Step 2
Push in the red, gumdrop-shaped button with your thumb.
While holding in the button, slide the back piece away from the main body of the Roomba.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
iRobot Roomba 4100 Filter Replacement
Step 3
Flip the back piece over in your hand.
Using your other hand, grab the yellow tab and pull it away from the back piece.
Step 4
Pinch the black plastic of the filter and pull it away from the yellow filter holder.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 11:45:47 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
