iRobot Roomba 770 Filter Replacement

Report 2 Downloads 168 Views
iRobot Roomba 770 Filter Replacement

iRobot Roomba 770 Filter Replacement This guide shows you how to replace the filters on your iRobot Roomba 770.

Written By: Andrew Horvath

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

iRobot Roomba 770 Filter Replacement

INTRODUCTION If used regularly, the filters of this device should be changed every 2 months. This guide will teach you how to replace the filters on your iRobot Roomba 770.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

iRobot Roomba 770 Filter Replacement

Step 1 — Filter 

Orient the Roomba so that the "Clean Button" is up, and so that the words are right side up.



Push down on the large button on the part of the Roomba that is closest to you. Pull the back of the Roomba (the dust bin) out.

Step 2



Take the dust bin and orient it so that the curved part is facing away and the clear side is facing up.



Push the small yellow tab inward, and swing it out toward you.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

iRobot Roomba 770 Filter Replacement

Step 3



Push up on the yellow tabs on the yellow filters, and pull both filters out.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 12:27:48 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4