ITEMS & TOOLS NEEDED TO INSTALL

ITEMS & TOOLS NEEDED TO INSTALL 1. CUTTING

UTILITY KNIFE

HAND CUTTING MACHINE

2. TOOLS

MEASUREMENT TAPE

LEVEL

PENCIL

SANDPAPER

3. PAINTING

PAINT

BRUSH

PAINT ROLLER

BUCKET

PAINT SPRAYER

4. INSTALLING

PUTTY KNIFT

JOINT COMPOUND

CAULKING GUN

PAINTABLE CAULKING

www.dhouzz.com

ADHESIVE

INSTALLATION INSTRUCTIONS Step 2: Measure the less than panel size area &

Step 1: Measurement the wall.

mark the total size on the panel with a pencil.

Step 3: Cut the panel by using a hand cutting machine or utility knife as follow the pencil line marked at the back of the panel.

Step 5: Apply adhesive to all sides of the back & other flat spaces of the panel.

Step 4: Sand the cut edge to a smooth finish.

Step 6: Put pressure to all corners of the panel when installing them. Allign with other panels & check using a level to confirm during installation.

www.dhouzz.com

Step 7: Fill joint seams with paintable joint compound or paintable caulking, smoothen the joints using your finger.

Step 8: Clean the surface with slightly damp rag or sandpaper.

Step 9: Apply the primer to installed panels (Spray, Brush or Roll).

Step 10: Paint the installed wall (Spray, Brush or Roll).

Step 11: Completed installation.

www.dhouzz.com