JN-1 CUTSHEET:Layout 1.qxd
MODEL JN-1 JACK NUT TOOL KIT
JACKS NUTS PROVIDE A RELIABLE AND SECURE METHOD FOR MOUNTING MAGNETIC LOCKS IN METAL DOOR FRAMES THAT ARE 3/16” THICK OR LESS. DURING INSTALLATION THE BODY OF THE JACK-NUT COLLASPES ON THE BACK SIDE TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE.
THE JN-1 JACK NUT TOOL KIT CONTAINS
ONE - JACK NUT INSTALLATION TOOL ONE - 25/64” DRILL BIT ONE - 5M MANDREL INSTALLED IN INSTALLATION TOOL FIFTY - 5M JACK NUTS FIFTY - 5M x .75” FLAT HEAD PHILLIPS MACHINE SCREWS ONE EACH OF 3M, 4M & 6M MANDREL METAL TOOL BOX HOLDS ALL ITEMS
ALARM CONTROLS CORPORATION 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 WWW.ALARMCONTROLS.COM EMAIL: [email protected]
JACK NUT INSTALLATION KIT CONTENTS
MODEL JN-1
JACK NUT INSTALLATION TOOL
ONE JACK NUT INSTALLATION TOOL 1 - 5M MANDREL INSTALLED IN INSTALLATION TOOL 50 - 5M x .75 FLAT HEAD PHILLIPS MACHINE SCREW 50 - 5M JACK NUTS 1 - 3M MANDREL 1 - 4M MANDREL 1 - 6M MANDREL
TO REORDER ADDITIONAL JACK NUTS AND SCREWS USE P/N JN-50 PACKAGE CONSISTS OF 5O - 5M JACK NUTS 50 - 5M x .75 FLAT HEAD PHILLIPS MACHINE SCREWS
ALARM CONTROLS CORPORATION
“QUALITY SECURITY EQUIPMENT SINCE 1971” 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 PH: 800 645-5538 FAX: 631 586-4220 EMAIL: [email protected] WWW.ALARMCONTROLS.COM
ALARM CONTROLS CORPORATION
“QUALITY SECURITY EQUIPMENT SINCE 1971” 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 PH: 800 645-5538 FAX: 631 586-4220 EMAIL: [email protected] WWW.ALARMCONTROLS.COM
JACK NUT INSTALLATION TOOL MANDREL NOSEPIECE
JACK NUT INSTALLATION
MANDREL LOCKNUT
STEP 1 MANDREL STOP PIN HOLE
MANDREL
DOOR FRAME
STROKE ADJUSTMENT SCREW
THREAD JACK NUT ONTO THE MANDREL OF THE INSTALLATION TOOL. THEN PUSH THE JACK NUT ALL THE WAY INTO THE PRE-DRILLED HOLE,(25/64” DRILL), UNTIL THE FLANGE OF THE JACK NUT IS FIRMLY AGAINST DOOR FRAME.
JACK NUT RELEASE KNOB
STROKE ADJUSTMENT SCREW LOCKNUT
COLLAPSED JACK NUT
MANDREL STOP PIN STORAGE
STEP 2 SQUEEZE HANDLES OF INSTALLATION TOOL UNTIL JACK NUT IS FULLY COLLAPSED. THEN UN-SCREW MANDREL WITH THE JACK NUT RELEASE KNOB.
MANDREL WRENCH
TO CHANGE MANDREL
STEP 3
(JACK NUT TOOL HAS 5M MANDREL INSTALLED)
PASS FLAT HEAD 5M MACHINE SCREW THROUGH HEADER PLATE AND TIGHTEN SCREW UNTIL SNUG.
STEP 1 REMOVE STOP PIN FROM STORAGE COMPARTMENT. STEP 2 ROTATE JACK NUT RELEASE KNOB UNTIL THE STOP PIN HOLES LINE-UP AND INSERT STOP PIN. STEP 3 UN-SCREW MANDREL NOSEPIECE. REMOVE LOCK NUT FROM NOSEPIECE. STEP 4 USE MANDREL WRENCH TO UN-SCREW MANDREL. ROTATE WRENCH CLOCKWISE TO UN-SCREW. STEP 5 RE-ASSEMBLE NOSEPIECE WITH LOCK NUT INSTALLED.
HEADER PLATE
JACKS NUTS PROVIDE A RELIABLE AND SECURE METHOD FOR MOUNTING MAGNETIC LOCKS IN METAL DOOR FRAMES THAT ARE 3/16” THICK OR LESS. DURING INSTALLATION THE BODY OF THE JACK-NUT COLLASPES ON THE BACK SIDE TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE.
THE JN-1 JACK NUT TOOL KIT CONTAINS
ONE - JACK NUT INSTALLATION TOOL ONE - 25/64” DRILL BIT ONE - 5M MANDREL INSTALLED IN INSTALLATION TOOL FIFTY - 5M JACK NUTS FIFTY - 5M x .75” FLAT HEAD PHILLIPS MACHINE SCREWS ONE EACH OF 3M, 4M & 6M MANDREL METAL TOOL BOX HOLDS ALL ITEMS
ALARM CONTROLS CORPORATION 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 WWW.ALARMCONTROLS.COM EMAIL: [email protected]
JACK NUT INSTALLATION KIT CONTENTS
MODEL JN-1
JACK NUT INSTALLATION TOOL
ONE JACK NUT INSTALLATION TOOL 1 - 5M MANDREL INSTALLED IN INSTALLATION TOOL 50 - 5M x .75 FLAT HEAD PHILLIPS MACHINE SCREW 50 - 5M JACK NUTS 1 - 3M MANDREL 1 - 4M MANDREL 1 - 6M MANDREL
TO REORDER ADDITIONAL JACK NUTS AND SCREWS USE P/N JN-50 PACKAGE CONSISTS OF 5O - 5M JACK NUTS 50 - 5M x .75 FLAT HEAD PHILLIPS MACHINE SCREWS
ALARM CONTROLS CORPORATION
“QUALITY SECURITY EQUIPMENT SINCE 1971” 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 PH: 800 645-5538 FAX: 631 586-4220 EMAIL: [email protected] WWW.ALARMCONTROLS.COM
ALARM CONTROLS CORPORATION
“QUALITY SECURITY EQUIPMENT SINCE 1971” 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 PH: 800 645-5538 FAX: 631 586-4220 EMAIL: [email protected] WWW.ALARMCONTROLS.COM
JACK NUT INSTALLATION TOOL MANDREL NOSEPIECE
JACK NUT INSTALLATION
MANDREL LOCKNUT
STEP 1 MANDREL STOP PIN HOLE
MANDREL
DOOR FRAME
STROKE ADJUSTMENT SCREW
THREAD JACK NUT ONTO THE MANDREL OF THE INSTALLATION TOOL. THEN PUSH THE JACK NUT ALL THE WAY INTO THE PRE-DRILLED HOLE,(25/64” DRILL), UNTIL THE FLANGE OF THE JACK NUT IS FIRMLY AGAINST DOOR FRAME.
JACK NUT RELEASE KNOB
STROKE ADJUSTMENT SCREW LOCKNUT
COLLAPSED JACK NUT
MANDREL STOP PIN STORAGE
STEP 2 SQUEEZE HANDLES OF INSTALLATION TOOL UNTIL JACK NUT IS FULLY COLLAPSED. THEN UN-SCREW MANDREL WITH THE JACK NUT RELEASE KNOB.
MANDREL WRENCH
TO CHANGE MANDREL
STEP 3
(JACK NUT TOOL HAS 5M MANDREL INSTALLED)
PASS FLAT HEAD 5M MACHINE SCREW THROUGH HEADER PLATE AND TIGHTEN SCREW UNTIL SNUG.
STEP 1 REMOVE STOP PIN FROM STORAGE COMPARTMENT. STEP 2 ROTATE JACK NUT RELEASE KNOB UNTIL THE STOP PIN HOLES LINE-UP AND INSERT STOP PIN. STEP 3 UN-SCREW MANDREL NOSEPIECE. REMOVE LOCK NUT FROM NOSEPIECE. STEP 4 USE MANDREL WRENCH TO UN-SCREW MANDREL. ROTATE WRENCH CLOCKWISE TO UN-SCREW. STEP 5 RE-ASSEMBLE NOSEPIECE WITH LOCK NUT INSTALLED.
HEADER PLATE
