K30-10x0 - FD Supply
PREMIUM PLUMBING PRODUCTS
PROJECT NAME: _______________________________________
®
LOCATION: _____________________________________________ SPECIFIER ITEM NO. ____________________QTY: _________
1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110 www.encoreplumbing.com • www.componenthardware.com
ENCORE PART NO. _____________________________________
Encore® Dipperwell Assembly
Corrosion resistant stainless steel construction
K30-10x0
Commercial Quality Features • Type 18-8 stainless steel inner and outer shell • Stainless steel basket drain • Available with or without faucet
K30-1000 KL30-1010
Dipperwell only Dipperwell with faucet
SPECIFICATIONS: Dipperwell assembly to be Encore K30-10x0 Series to be in the following configuration: ____ K30-1000 Dipperwell only ____ KL30-1010 Dipperwell with KL22-3100 faucet* Assembly to be 18-8 stainless steel. Basket drain to be stainless steel and 1-1/2” OD x 4”. Brass NPT tailpiece to be included. Handle to be solid unbreakable chrome plated brass. Assembly to fit into 6” dia. opening.
7” (178mm)
*KL22-3100 faucet body to be constructed of polished chrome plated brass with total lead content less than 0.25% by weighted average. Faucet to have unbreakable solid chrome plated brass handle. Standard flow rate 1.33gpm @ 45 PSI. For .4gpm specify “–SB”.
DIPPERWELL ASSY
7-1/16” (180mm) 3-1/4” (83mm)
1-7/8” (47mm)
2-1/2” (64mm)
3/8” (9mm)
6-1/4” (162mm)
6-9/16” 6-3/4” (166mm) (171mm) 11-3/4” (299mm)
2-1/4” (57mm)
1-5/8” S/S 1-1/2" DRAIN (42mm) 6” (152mm)
CHROME PLATED BRASS TAILPIECE
Dimensions shown in inches (mm) are for reference only and are subject to change.
KL22-3100 faucet: 1/4” Union Tailpiece 1/2” NPS Male Inlet
Approximate shipping weight - 3.5 lbs Warranty - 2 years parts
COMPLIES WITH: ASME A112.18.1-2005 CSA B125.1-05 NSF/ANSI 61/9, ANNEX G SECTION 116875 OF THE CALIFORNIA HEALTH & SAFETY CODE (COMMONLY KNOW AS AB1953) VERMONT ACT 193 UNIFORM PLUMBING CODE
Encore is a registered trademark of Component Hardware, registered in the US Specifications subject to change without notice © Component Hardware
LOW LEAD PLUMBING
C
US
NSF 61/9 UP CODE
Certified To NSF/ANSI 61 Section 9-G
SPC-K30-10x0 Rev. 11/2013
PROJECT NAME: _______________________________________
®
LOCATION: _____________________________________________ SPECIFIER ITEM NO. ____________________QTY: _________
1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110 www.encoreplumbing.com • www.componenthardware.com
ENCORE PART NO. _____________________________________
Encore® Dipperwell Assembly
Corrosion resistant stainless steel construction
K30-10x0
Commercial Quality Features • Type 18-8 stainless steel inner and outer shell • Stainless steel basket drain • Available with or without faucet
K30-1000 KL30-1010
Dipperwell only Dipperwell with faucet
SPECIFICATIONS: Dipperwell assembly to be Encore K30-10x0 Series to be in the following configuration: ____ K30-1000 Dipperwell only ____ KL30-1010 Dipperwell with KL22-3100 faucet* Assembly to be 18-8 stainless steel. Basket drain to be stainless steel and 1-1/2” OD x 4”. Brass NPT tailpiece to be included. Handle to be solid unbreakable chrome plated brass. Assembly to fit into 6” dia. opening.
7” (178mm)
*KL22-3100 faucet body to be constructed of polished chrome plated brass with total lead content less than 0.25% by weighted average. Faucet to have unbreakable solid chrome plated brass handle. Standard flow rate 1.33gpm @ 45 PSI. For .4gpm specify “–SB”.
DIPPERWELL ASSY
7-1/16” (180mm) 3-1/4” (83mm)
1-7/8” (47mm)
2-1/2” (64mm)
3/8” (9mm)
6-1/4” (162mm)
6-9/16” 6-3/4” (166mm) (171mm) 11-3/4” (299mm)
2-1/4” (57mm)
1-5/8” S/S 1-1/2" DRAIN (42mm) 6” (152mm)
CHROME PLATED BRASS TAILPIECE
Dimensions shown in inches (mm) are for reference only and are subject to change.
KL22-3100 faucet: 1/4” Union Tailpiece 1/2” NPS Male Inlet
Approximate shipping weight - 3.5 lbs Warranty - 2 years parts
COMPLIES WITH: ASME A112.18.1-2005 CSA B125.1-05 NSF/ANSI 61/9, ANNEX G SECTION 116875 OF THE CALIFORNIA HEALTH & SAFETY CODE (COMMONLY KNOW AS AB1953) VERMONT ACT 193 UNIFORM PLUMBING CODE
Encore is a registered trademark of Component Hardware, registered in the US Specifications subject to change without notice © Component Hardware
LOW LEAD PLUMBING
C
US
NSF 61/9 UP CODE
Certified To NSF/ANSI 61 Section 9-G
SPC-K30-10x0 Rev. 11/2013
