Kiswel Welding Products Interactive Catalog
MIG Wires Mild Steel High Tensile Steel Stainless Steel
WELDING PRODUCTS Supplier... For The Highest Demands 35
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
KC-25M
KC-26
Typical Applications
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Characteristics Of Usage
1. Suitable for high speed welding of steel sheet by short circuiting transfer in all positions. 2. Stable arc and low spatter loss. 3. Applicable to mixture gas(Ar+20% C02).
1. Wide range of operability depending on applications and procedures. Can be used in all positions with pulse equipment. 2. Stable arc and low spatter loss.
1. Wide range of operability depending on applications and procedures. Can be used in all positions with pulse equipment. 2. Stable arc and low spatter loss. 3. Suitable for high speed welding of thick plates.
Weld Metal Composition
Carbon
0.07 %
Carbon
0.07 %
Carbon
0.06 %
Silicon
0.67 %
Silicon
0.67 %
Silicon
0.80 %
Manganese
1.20 %
Manganese
1.20 %
Manganese
1.53 %
Phosphorus
0.015 %
Phosphorus
0.015 %
Phosphorus
0.014 %
Sulphur
0.011 %
Sulphur
0.011 %
Sulphur
0.010 %
SG
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
KC-25C
AWS ER70S-3
Mechanical Properties
Mild Steel
AWS ER70S-3
CO2
Y-P (psi) 62,366
AWS ER70S-G
Ar+20 % C02
SG
Ar+20 % C02
SG
63,817
Y-P (psi)
63,817
Y-P (psi) 71,068
75,420 84,122
CO2
Ar+20 % C02
T-S (psi)
75,4201
78,320
T-S (psi)
78,320
T-S (psi) 81,221
El
33 %
30 %
El
30 %
El
29 %
V-notch
66 ft/lb @ 0 °F 74 ft/lb @ 0° F
V-notch
74 ft/lb @ 0 °F
V-notch
81 ft/lb @ 0 °F 89 ft/lb @ 0 °F
Dia in (mm)
F
.030 (0.8) .035 (0.9) .040 (1.0) .045 (1.2) .052 (1.4) 1/16 (1.6)
Amp
50-120 50-140 80-250 100 -350 140-400 200-450
V&OH
Dia in (mm)
50-100 50-120 60-150 70-200 100-250 120-300
.030 .035 .040 .045 .052 1/16
Detailed Packaging Information All position with proper equipment and procedures.
Amp F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
50-200 70-250 100-350 140-400 200-550
Detailed Packaging Information All position with proper equipment and procedures.
ABS, CWB, DNV, KR, LR, NK, JIS, KS
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
30 %
Amp F
50-200 70-250 100-350 140-400 200-550
V&OH
50-120 50-150 50-180 100-250 120-300
Detailed Packaging Information All position with proper equipment and procedures.
ABS, BV, DNV, GL, KR, LR, NK, JIS, KS
Supplier... For The Highest Demands WELDING PRODUCTS
36
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Mild Steel
Butt and Fillet welding of vehicles, building, ships, machinery and bridges in all positions.
Butt and Fillet welding of vehicles, cars, ships, machinery and bridges.
1. Good arc characteristics in all positions due to triple deoxidizing alloy content. 2. Surface tension is conducive to all position welding especially in open root pipe or plate welding.
1. Arc is very stable and can be used for welding steels which have a rusty or scaling surface oxide(AI, Ti, Zr). 2. Excellent for all position welding, particularly in pipe welding root passes in Mig or Tig . Weld bead wets out with good surface tension to support open root welds.
0.07 %
Carbon
0.07 %
Silicon
0.62 %
Silicon
0.86 %
Manganese
1.18 %
Manganese
1.53 %
Phosphorus
0.014%
Phosphorus
0.012 %
Sulphur
0.010%
Sulphur
0.007 %
Carbon Silicon Manganese Titanium Aluminum Zirconium
Butt and Fillet welding of vehicles, steel frames, bridges, machinery and shipbuilding.
1. Stable arc, low spatter loss and less slag formation. 2. Deposited weld metal has excellent notch toughness. 3. Excellent bead appearance when used with argon Co2 gas shielding.
Carbon
SG
Ar+20 % C02
SG
Y-P (psi)
71,068
T-S (psi)
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
KC-70S2
Characteristics Of Usage
KC-28C
Weld Metal Composition
KC-27
AWS ER70S-6
Mechanical Properties
AWS ER70S-G
AWS ER70S-2
Ar+20 % C02
SG
Y-P (psi) 65,267
69,618
Y-P (psi) 71,068
79,771
81,221
T-S (psi) 79,771
84,122
T-S (psi) 79,771
88,473
El
31 %
El
30 %
28 %
El
V-notch
118 ft/lb @ 0 °F
V-notch
52 ft/lb @ -20 °F 52 ft/lb @ -20 °F V-notch 59 ft/lb @ -20 °F 37 ft/lb @ -20 °F
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp F
V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information
CO2
0.07 % 0.54 % 1.18 % 0.07 % 0.08 % 0.05 %
Dia in (mm) .030 .035 .040 .045 .052 1/16
F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp V&OH
50-200 70-250 100-350 140-400
50-120 50-150 50-180 100-250
200-550 120-300
Detailed Packaging Information
All position with proper equipment and procedures.
All position with proper equipment and procedures.
ABS, DNV, NK, JIS
ABS, BV, CCS, CWB, DNV, GL, LR, KR, NK, TUV, JIS, KS
Supplier... For The Highest Demands WELDING PRODUCTS
37
CO2
Ar+20 % C02
29 %
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
26 %
Amp F
50-200 70-250 100-350 140-400 200-550
V&OH
50-120 50-150 50-180 100-250 -
Detailed Packaging Information All position with proper equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
Mild Steel
AWS ER70S-G
ZO-55
ZO-60
Butt and Fillet welding of mild steel and 768 ksi class high tensile strength steel. Construction equipment, bridges and buildings.
Construction machinery, bridges and storage tanks. Butt and H-fillet welding of 839 ksi class high tensile strength steel.
1. Excellent mechanical properties obtained under high heat input and interpass temp. 2. Excellent productivity in both fillet and groove welding in both low and high heat inputs.
1. Arc is very stable, spatter is less and weldability is excellent even in high welding current range. 2. High working efficiency is obtained by automatic and semi-automatic welding due to high deposition rate and deep penetration.
Carbon
0.07 %
Carbon
0.07 %
Silicon
0.92 %
Silicon
0.84 %
Manganese
1.92 %
Manganese
1.95 %
Titanium
0.18 %
Molybdenum
0.31 %
Titanium
0.17 %
SG Y-P (psi) T-S (psi) El IV Welding Dia in (mm) .030 .035 .040 .045 .052 1/16
AWS ER80S-G
CO2 CO2 84,122 68,168 92,824 81,221 27 % 29 % 170(17) 32 °F 120(12) 32 °F 18KJ/cm,302 °F 40KJ/cm,662 °F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
F
Amp V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
SG
CO2
Ar+20% C02
Y-P (psi) 79,771
84,122
T-S (psi) 92,824
95,725 28 %
27 %
El
V-notch 81 ft/lb @ 0 °F 103 ft/lb @ 0 °F Dia in (mm) .030 .035 .040 .045 .052 1/16
Amp F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position with proper equipment and procedures.
Supplier... For The Highest Demands WELDING PRODUCTS
V&OH
120-350 80-180 150-400 100-250 200-500 120-300
NK, JIS
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Mechanical Properties
Weld Metal Composition
Characteristics Of Usage
Typical Applications
MIG Wires
38
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
High Tensile Steel
KC-90SB3
1.25%Cr-0.5 Mo heat resistant steels.
2.25%Cr-1% Mo heat resistant steels.
1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations.
1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations.
0.08 %
Carbon
0.09 %
Carbon
0.09 %
Silicon
0.58 %
Silicon
0.54 %
Silicon
0.47 %
Manganese
1.85 %
Manganese
0.51 %
Manganese
0.66 %
Molybdenum
0.46 %
Chromium
1.26 %
Chromium
2.31 %
Molybdenum
0.45 %
Molybdenum
1.0 %
Butt and Fillet welding of construction equipment, boiler, low alloy steels and 0.5%Mo alloy steel.
1. Used for welding steels employed at elevated temperatures up to 932 °F. 2. Where joint thickness is critical, it is important to apply the correct preheating and interpass temperatures.
Carbon
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
Y-P (psi)
88,473
Y-P (psi)
72,519
Y-P (psi)
82,672
T-S (psi)
100,076
T-S (psi)
84,122
T-S (psi)
95,725
El
23 %
El
25 %
El
24 %
V-Notch
44 ft/lb @ -20 °F
V-Notch
59 ft/lb @ 32 °F
V-Notch
59 ft/lb @ 0 °F
Dia in (mm)
F
Dia in (mm)
F
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp F
V&OH
50-180 80-250 120-350 140 -400
50-120 60-150 70-200 100-250 220-450 120-250
Detailed Packaging Information All position with proper equipment and procedures.
.030 .035 .040 .045 .052 1/16
Amp
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
KC-80SB2
Characteristics Of Usage
AWS ER90S-B3
Weld Metal Composition
KC-80D2
AWS ER80S-B2
Mechanical Properties
AWS ER80S-D2
Supplier... For The Highest Demands WELDING PRODUCTS
39
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
AWS ER2209
M-2209
AWS ER308
M-308
M-308H
Welding of 18%Cr-8%Ni stainless steels (AISI 301, 302, 304). It provides better weldability together with excellent corrosion resistance.
Welding of high carbon 18%Cr-8%Ni stainless steels (AISI 304H). It provides better weldability together with excellent corrosion resistance.
1. Designed for welding types 301, 302, 304, 304L, 308 and 308L grades of austenitic grades of stainless steels 2. Can also be used to weld grades 321 and 347 when service temperatures do
1. Product is designed primarily for welding of type 304H and and 347H austenitic stainless steels when high temperature services are required.
Carbon
0.04 %
Carbon
0.05 %
Silicon
0.38 %
Silicon
0.42 %
Manganese
1.90 %
Manganese
2.06 %
Nickel
9.80 %
Nickel
9.70 %
Typical Applications Characteristics Of Usage
1. 2209 is a duplex stainless steel for welding type 2205 duplex stainless. 2. Has a high resistance to corrosive medias such as chlorides and hydrogen sulfides 3. Good resistance to intergranular, pitting and stress corrosion cracking.
Weld Metal Composition
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
121,832
T-S (psi)
88,473
T-S (psi)
85,572
El
28 %
El
40 %
El
44 %
IV (J)
-51°F:110
IV (J)
RT:110
IV (J)
0.01 % 0.40 % 1.75 % 8.70 % 22.70 % 3.20 %
not exceed 600°F.
Chromium
19.80 %
Chromium
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
19.90 %
-
-40°F:82
-321°F:50
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
All position welding is possible with the use of proper welding equipment and procedures.
All position welding is possible with the use of proper welding equipment and procedures.
All position welding is possible with the use of proper welding equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Welding of 23%Cr-9%Ni-3%Mo stainless steels (UNS S31803, STS 329J1/329J2L). Various applications of chemical engineering, shipbuilding and nuclear plant industries, etc.
Mechanical Properties
AWS ER308H
Supplier... For The Highest Demands WELDING PRODUCTS
40
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Stainless Steel
M-309LMo
Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L, 308L). The high silicon content improves the welding properties, such as wetting.
Suitable for dissimilar metal joint and underlaying on ferritic steels for overlaying stainless steel weld metals.
1. Designed for use for most austenitic grades that normally use the 308 grade, but with added silicon that greatly enhances wetting of the weld bead. This enhances the cosmetics of the bead appearance when required .
1. Primarily for welding type 316 stainless clad steels on the root pass and some dissimilar metals with additions of Mo. 2. Also used for welding of austenitic stainless alloys to carbon steels. 3. Service temperatures should not exceed 750°F.
0.02 %
Carbon
0.02 %
Silicon
0.38 %
Silicon
0.75 %
Manganese
1.90 %
Manganese
1.95 %
Nickel
9.80 %
Nickel
10.40 %
Chromium
19.70 %
Carbon Silicon Manganese Nickel Chromium Molybdenum
Typical Applications
M-308LSi
Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L, 308L). It provides better weldability together with excellent corrosion resistance.
Characteristics Of Usage
AWS ER309LMo
1. Designed for welding types 301, 302, 304, 304L, 308 and 308L grades of austenitic grades of stainless steels. 2. Can also be used to weld grades 321 and 347 when service temperatures do not exceed 600°F.
Weld Metal Composition
M-308L
AWS ER308LSi
Carbon
Mechanical Properties
AWS ER308L
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
82,672
T-S (psi)
85,572
T-S (psi)
95,725
El
44 %
El
42 %
El
33 %
32 °F:90
IV (J)
32 °F:110
IV (J)
32 °F:92
Chromium
IV (J)
19.80 %
-321 °F:60
-40 °F:89
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
-321 °F:82
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
CWB, TUV
Supplier... For The Highest Demands WELDING PRODUCTS
41
0.02 % 0.75 % 1.45 % 14.5 % 23.20 % 2.61 %
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-312
Welding of heat-resistant austenitic steels of the 25%Cr-20%Ni types(STS310S). It has good general oxidation resistance, especially at high temperature.
Welding of stainless steel of the 29%Cr-9%Ni types. Wire is widely used for joining of dissimilar metals such as carbon steel to stainless steel.
1. Developed primarily for welding type 310 stainless. 2. Can also be used to join types 410 and 430 stainless when preheating and heat treatment are not practical.
1. Type 312 was originally designed to join high temperature heat resistant alloys as well as strength high alloy steels to themselves and some dissimilar metals 2. 312 can also be used to join some abrasion resistant steels.
0.02 %
Carbon
0.10 %
Carbon
0.10 %
Silicon
0.75 %
Silicon
0.10 %
Silicon
0.43 %
Manganese
2.28 %
Manganese
1.73 %
Manganese
1.72 % 8.70 %
Welding of austenitic stainless alloys of the 22%Cr-12%Ni low carbon types and for joining stainless steels to non-alloy or low-alloy steels. The high silicon content improves the welding properties, such as wetting. 1. Designed primarily for the joining of 309 stainless where good wetting and bead appearance are important. 2. The additional silicon aids in smooth bead contour and superior wetting into the adjacent base metal. 3. Service temperatures below 750°F. Carbon
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
85,572
T-S (psi)
87,023
T-S (psi)
105,878
El
40 %
El
40 %
El
30 %
IV (J)
32 °F:90
IV (J)
32 °F:110
IV (J)
Nickel
13.70 %
Nickel
20.90 %
Nickel
Chromium
23.20 %
Chromium
26.60 %
Chromium
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
-
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Approved
Packaging
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
30.40 %
Welding Positions
Available Sizes / Rec. Parameters
Typical Applications
M-310
Characteristics Of Usage
AWS ER312
Weld Metal Composition
M-309LSi
AWS ER310
Mechanical Properties
AWS ER309LSi
Supplier... For The Highest Demands WELDING PRODUCTS
42
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Stainless Steel
AWS ER316
M-316
AWS ER316L
M-316L
AWS ER316LSi
Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types. The alloy has particularly good corrosion-resistance and heat-resistance.
Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types. The high silicon content improves the welding properties, such as wetting.
Designed for use on type 316 L and 316 grade austenitic stainless steels.
Carbon Silicon Manganese Nickel Chromium Molybdenum
Typical Applications Characteristics Of Usage
Designed for use on type 316 austenitic stainless steels.
Weld Metal Composition
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
84,122
T-S (psi)
84,122
T-S (psi)
82,672
El
38 %
El
38 %
El
30 %
IV (J)
32°F:100
IV (J)
32°F:90
IV (J)
0.04 % 0.40 % 1.62 % 12.10 % 18.40 % 2.30 %
0.02 % 0.39 % 1.89 % 11.80 % 18.60 % 2.20 %
1. Designed for use for type 316L grade stainless steel. 2 The additional silicon greatly enhances wetting of the weld bead that enhances the cosmetics of the bead appearance when required.
Carbon Silicon Manganese Chromium Nickel Molybdenum
385 °F:62
385 °F:50 Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
BV, DNV, KR
ABS, TUV
Approved
Packaging
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
32°F:110 -321 °F:40
Dia in (mm) (0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
0.02 % 0.76 % 1.85 % 12.20 % 18.70 % 2.30 %
Welding Positions
Available Sizes / Rec. Parameters
Welding of stainless steel of 18%Cr-12%Ni-Mo types (STS316). The low ferrite content improves the crack-resistance and corrosion resistance.
Mechanical Properties
M-316LSi
Supplier... For The Highest Demands WELDING PRODUCTS
43
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-409Nb
Welding of stainless alloys of the 18%Cr-9%Ni-Nb(Ti) types (STS 321, 347). Nb component improves the resistance to intergranular corrosion of the weld metal.
Welding of ferrite stainless alloys of the 13%Cr types (AISI409). It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange.
1. Designed for welding of grades 347 and 321 stabilized austenitic stainless steels. 2. Operating temperatures should not
1. This product was designed for welding Niobium stabilized stainless. 2. The added Nb helps to form stable carbides that promote improved resistance to corrosion with stronger properties at elevated temperatures.
Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum
Welding of stainless alloys of the 19%Cr-12%Ni-3.5%Mo low carbon types (STS317, 317L). Various applications of chemical engineering, shipbuilding and nuclear plant industries, etc.
1. Recommended for welding type 317 and 317L stainless steels with up to .04 % carbon in the weld deposit. 2. The higher Molybdenum content increases the resistance to pitting corrosion.
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
92,824
T-S (psi)
92,824
T-S (psi)
4,438 (1562°F)
El
40 %
El
41 %
El
56 %
IV (J)
0.02 % 0.48 % 1.09 % 13.10 % 18.90 % 3.40 %
-
exceed 750 °F.
IV (J)
0.05 % 0.46 % 2.24 % 9.30 % 19.30 % 0.60 %
-
Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum
IV (J)
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
M-347
Characteristics Of Usage
AWS ER409Nb
Weld Metal Composition
M-317L
AWS ER347
Mechanical Properties
AWS ER317L
Supplier... For The Highest Demands WELDING PRODUCTS
44
0.01 % 0.45 % 0.46 % 0.23 % 11.40 % 0.36 %
-
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-430
Welding of martensite stainless alloys of the 13%Cr types (STS 420). The alloy is suitable for the first layer of corrosion resistant weld claddings.
Welding of ferrite stainless alloys of the 17%Cr types (AISI 430, dissimilar steels). It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange.
1. Type 420 is a martensitic stainless steel that provides corrosion resistance similar to Type 410 plus increased strength and hardness 2. Typical uses include cutlery, surgical and dental instruments, scissors, tapes and straight edges.
1. Alloy 430 is a ferritic stainless which provides good ductility in heat-treated condition. 2. Used in the application of welding similar alloys as well as for overlays and thermal spraying. 3. A minimum of 300ºF before welding.
Carbon Silicon Manganese Nickel Chromium
Carbon Silicon Manganese Nickel Chromium
Welding of martensite stainless alloys of the 13%Cr types (STS 403, 410). The alloy is suitable for the first layer of corrosion resistant weld claddings.
1. Alloy 410 is used to weld Types 403, 405, 410 and 416. 2. Alloy 410 is also used for welding overlay on carbon steels to resist corrosion, erosion, or abrasion.
Carbon Silicon Manganese Nickel Chromium
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
78,320
T-S (psi)
-
T-S (psi)
73,969
El
35 %
El
-
El
35 %
Remark
PWHT:1373 °F x 1hr
5%H2SO4
-
Remark
PWHT:1373 °F x 1hr
0.02 % 0.34 % 0.39 % 12.80 %
0.33 % 0.41 % 0.37 % 12.70 %
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
M-420
Characteristics Of Usage
AWS ER430
Weld Metal Composition
M-410
AWS ER420
Mechanical Properties
AWS ER410
Supplier... For The Highest Demands WELDING PRODUCTS
45
0.02 % 0.33 % 0.44 % 16.60 %
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
WELDING PRODUCTS Supplier... For The Highest Demands 35
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
KC-25M
KC-26
Typical Applications
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Used in virtually all areas of steel construction from automotive to pressure vessel shops, transportation bridges, buildings, railcar and shipbuilding.
Characteristics Of Usage
1. Suitable for high speed welding of steel sheet by short circuiting transfer in all positions. 2. Stable arc and low spatter loss. 3. Applicable to mixture gas(Ar+20% C02).
1. Wide range of operability depending on applications and procedures. Can be used in all positions with pulse equipment. 2. Stable arc and low spatter loss.
1. Wide range of operability depending on applications and procedures. Can be used in all positions with pulse equipment. 2. Stable arc and low spatter loss. 3. Suitable for high speed welding of thick plates.
Weld Metal Composition
Carbon
0.07 %
Carbon
0.07 %
Carbon
0.06 %
Silicon
0.67 %
Silicon
0.67 %
Silicon
0.80 %
Manganese
1.20 %
Manganese
1.20 %
Manganese
1.53 %
Phosphorus
0.015 %
Phosphorus
0.015 %
Phosphorus
0.014 %
Sulphur
0.011 %
Sulphur
0.011 %
Sulphur
0.010 %
SG
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
KC-25C
AWS ER70S-3
Mechanical Properties
Mild Steel
AWS ER70S-3
CO2
Y-P (psi) 62,366
AWS ER70S-G
Ar+20 % C02
SG
Ar+20 % C02
SG
63,817
Y-P (psi)
63,817
Y-P (psi) 71,068
75,420 84,122
CO2
Ar+20 % C02
T-S (psi)
75,4201
78,320
T-S (psi)
78,320
T-S (psi) 81,221
El
33 %
30 %
El
30 %
El
29 %
V-notch
66 ft/lb @ 0 °F 74 ft/lb @ 0° F
V-notch
74 ft/lb @ 0 °F
V-notch
81 ft/lb @ 0 °F 89 ft/lb @ 0 °F
Dia in (mm)
F
.030 (0.8) .035 (0.9) .040 (1.0) .045 (1.2) .052 (1.4) 1/16 (1.6)
Amp
50-120 50-140 80-250 100 -350 140-400 200-450
V&OH
Dia in (mm)
50-100 50-120 60-150 70-200 100-250 120-300
.030 .035 .040 .045 .052 1/16
Detailed Packaging Information All position with proper equipment and procedures.
Amp F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
50-200 70-250 100-350 140-400 200-550
Detailed Packaging Information All position with proper equipment and procedures.
ABS, CWB, DNV, KR, LR, NK, JIS, KS
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
30 %
Amp F
50-200 70-250 100-350 140-400 200-550
V&OH
50-120 50-150 50-180 100-250 120-300
Detailed Packaging Information All position with proper equipment and procedures.
ABS, BV, DNV, GL, KR, LR, NK, JIS, KS
Supplier... For The Highest Demands WELDING PRODUCTS
36
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Mild Steel
Butt and Fillet welding of vehicles, building, ships, machinery and bridges in all positions.
Butt and Fillet welding of vehicles, cars, ships, machinery and bridges.
1. Good arc characteristics in all positions due to triple deoxidizing alloy content. 2. Surface tension is conducive to all position welding especially in open root pipe or plate welding.
1. Arc is very stable and can be used for welding steels which have a rusty or scaling surface oxide(AI, Ti, Zr). 2. Excellent for all position welding, particularly in pipe welding root passes in Mig or Tig . Weld bead wets out with good surface tension to support open root welds.
0.07 %
Carbon
0.07 %
Silicon
0.62 %
Silicon
0.86 %
Manganese
1.18 %
Manganese
1.53 %
Phosphorus
0.014%
Phosphorus
0.012 %
Sulphur
0.010%
Sulphur
0.007 %
Carbon Silicon Manganese Titanium Aluminum Zirconium
Butt and Fillet welding of vehicles, steel frames, bridges, machinery and shipbuilding.
1. Stable arc, low spatter loss and less slag formation. 2. Deposited weld metal has excellent notch toughness. 3. Excellent bead appearance when used with argon Co2 gas shielding.
Carbon
SG
Ar+20 % C02
SG
Y-P (psi)
71,068
T-S (psi)
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
KC-70S2
Characteristics Of Usage
KC-28C
Weld Metal Composition
KC-27
AWS ER70S-6
Mechanical Properties
AWS ER70S-G
AWS ER70S-2
Ar+20 % C02
SG
Y-P (psi) 65,267
69,618
Y-P (psi) 71,068
79,771
81,221
T-S (psi) 79,771
84,122
T-S (psi) 79,771
88,473
El
31 %
El
30 %
28 %
El
V-notch
118 ft/lb @ 0 °F
V-notch
52 ft/lb @ -20 °F 52 ft/lb @ -20 °F V-notch 59 ft/lb @ -20 °F 37 ft/lb @ -20 °F
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp F
V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information
CO2
0.07 % 0.54 % 1.18 % 0.07 % 0.08 % 0.05 %
Dia in (mm) .030 .035 .040 .045 .052 1/16
F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp V&OH
50-200 70-250 100-350 140-400
50-120 50-150 50-180 100-250
200-550 120-300
Detailed Packaging Information
All position with proper equipment and procedures.
All position with proper equipment and procedures.
ABS, DNV, NK, JIS
ABS, BV, CCS, CWB, DNV, GL, LR, KR, NK, TUV, JIS, KS
Supplier... For The Highest Demands WELDING PRODUCTS
37
CO2
Ar+20 % C02
29 %
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
26 %
Amp F
50-200 70-250 100-350 140-400 200-550
V&OH
50-120 50-150 50-180 100-250 -
Detailed Packaging Information All position with proper equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
Mild Steel
AWS ER70S-G
ZO-55
ZO-60
Butt and Fillet welding of mild steel and 768 ksi class high tensile strength steel. Construction equipment, bridges and buildings.
Construction machinery, bridges and storage tanks. Butt and H-fillet welding of 839 ksi class high tensile strength steel.
1. Excellent mechanical properties obtained under high heat input and interpass temp. 2. Excellent productivity in both fillet and groove welding in both low and high heat inputs.
1. Arc is very stable, spatter is less and weldability is excellent even in high welding current range. 2. High working efficiency is obtained by automatic and semi-automatic welding due to high deposition rate and deep penetration.
Carbon
0.07 %
Carbon
0.07 %
Silicon
0.92 %
Silicon
0.84 %
Manganese
1.92 %
Manganese
1.95 %
Titanium
0.18 %
Molybdenum
0.31 %
Titanium
0.17 %
SG Y-P (psi) T-S (psi) El IV Welding Dia in (mm) .030 .035 .040 .045 .052 1/16
AWS ER80S-G
CO2 CO2 84,122 68,168 92,824 81,221 27 % 29 % 170(17) 32 °F 120(12) 32 °F 18KJ/cm,302 °F 40KJ/cm,662 °F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
F
Amp V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
SG
CO2
Ar+20% C02
Y-P (psi) 79,771
84,122
T-S (psi) 92,824
95,725 28 %
27 %
El
V-notch 81 ft/lb @ 0 °F 103 ft/lb @ 0 °F Dia in (mm) .030 .035 .040 .045 .052 1/16
Amp F
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position with proper equipment and procedures.
Supplier... For The Highest Demands WELDING PRODUCTS
V&OH
120-350 80-180 150-400 100-250 200-500 120-300
NK, JIS
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Mechanical Properties
Weld Metal Composition
Characteristics Of Usage
Typical Applications
MIG Wires
38
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
High Tensile Steel
KC-90SB3
1.25%Cr-0.5 Mo heat resistant steels.
2.25%Cr-1% Mo heat resistant steels.
1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations.
1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations.
0.08 %
Carbon
0.09 %
Carbon
0.09 %
Silicon
0.58 %
Silicon
0.54 %
Silicon
0.47 %
Manganese
1.85 %
Manganese
0.51 %
Manganese
0.66 %
Molybdenum
0.46 %
Chromium
1.26 %
Chromium
2.31 %
Molybdenum
0.45 %
Molybdenum
1.0 %
Butt and Fillet welding of construction equipment, boiler, low alloy steels and 0.5%Mo alloy steel.
1. Used for welding steels employed at elevated temperatures up to 932 °F. 2. Where joint thickness is critical, it is important to apply the correct preheating and interpass temperatures.
Carbon
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
Y-P (psi)
88,473
Y-P (psi)
72,519
Y-P (psi)
82,672
T-S (psi)
100,076
T-S (psi)
84,122
T-S (psi)
95,725
El
23 %
El
25 %
El
24 %
V-Notch
44 ft/lb @ -20 °F
V-Notch
59 ft/lb @ 32 °F
V-Notch
59 ft/lb @ 0 °F
Dia in (mm)
F
Dia in (mm)
F
Dia in (mm) .030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp F
V&OH
50-180 80-250 120-350 140 -400
50-120 60-150 70-200 100-250 220-450 120-250
Detailed Packaging Information All position with proper equipment and procedures.
.030 .035 .040 .045 .052 1/16
Amp
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
KC-80SB2
Characteristics Of Usage
AWS ER90S-B3
Weld Metal Composition
KC-80D2
AWS ER80S-B2
Mechanical Properties
AWS ER80S-D2
Supplier... For The Highest Demands WELDING PRODUCTS
39
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Amp V&OH
100-350 50-180 140-400 100-250 200-550 120-300
Detailed Packaging Information All position with proper equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
AWS ER2209
M-2209
AWS ER308
M-308
M-308H
Welding of 18%Cr-8%Ni stainless steels (AISI 301, 302, 304). It provides better weldability together with excellent corrosion resistance.
Welding of high carbon 18%Cr-8%Ni stainless steels (AISI 304H). It provides better weldability together with excellent corrosion resistance.
1. Designed for welding types 301, 302, 304, 304L, 308 and 308L grades of austenitic grades of stainless steels 2. Can also be used to weld grades 321 and 347 when service temperatures do
1. Product is designed primarily for welding of type 304H and and 347H austenitic stainless steels when high temperature services are required.
Carbon
0.04 %
Carbon
0.05 %
Silicon
0.38 %
Silicon
0.42 %
Manganese
1.90 %
Manganese
2.06 %
Nickel
9.80 %
Nickel
9.70 %
Typical Applications Characteristics Of Usage
1. 2209 is a duplex stainless steel for welding type 2205 duplex stainless. 2. Has a high resistance to corrosive medias such as chlorides and hydrogen sulfides 3. Good resistance to intergranular, pitting and stress corrosion cracking.
Weld Metal Composition
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
121,832
T-S (psi)
88,473
T-S (psi)
85,572
El
28 %
El
40 %
El
44 %
IV (J)
-51°F:110
IV (J)
RT:110
IV (J)
0.01 % 0.40 % 1.75 % 8.70 % 22.70 % 3.20 %
not exceed 600°F.
Chromium
19.80 %
Chromium
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
19.90 %
-
-40°F:82
-321°F:50
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
All position welding is possible with the use of proper welding equipment and procedures.
All position welding is possible with the use of proper welding equipment and procedures.
All position welding is possible with the use of proper welding equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Welding of 23%Cr-9%Ni-3%Mo stainless steels (UNS S31803, STS 329J1/329J2L). Various applications of chemical engineering, shipbuilding and nuclear plant industries, etc.
Mechanical Properties
AWS ER308H
Supplier... For The Highest Demands WELDING PRODUCTS
40
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Stainless Steel
M-309LMo
Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L, 308L). The high silicon content improves the welding properties, such as wetting.
Suitable for dissimilar metal joint and underlaying on ferritic steels for overlaying stainless steel weld metals.
1. Designed for use for most austenitic grades that normally use the 308 grade, but with added silicon that greatly enhances wetting of the weld bead. This enhances the cosmetics of the bead appearance when required .
1. Primarily for welding type 316 stainless clad steels on the root pass and some dissimilar metals with additions of Mo. 2. Also used for welding of austenitic stainless alloys to carbon steels. 3. Service temperatures should not exceed 750°F.
0.02 %
Carbon
0.02 %
Silicon
0.38 %
Silicon
0.75 %
Manganese
1.90 %
Manganese
1.95 %
Nickel
9.80 %
Nickel
10.40 %
Chromium
19.70 %
Carbon Silicon Manganese Nickel Chromium Molybdenum
Typical Applications
M-308LSi
Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L, 308L). It provides better weldability together with excellent corrosion resistance.
Characteristics Of Usage
AWS ER309LMo
1. Designed for welding types 301, 302, 304, 304L, 308 and 308L grades of austenitic grades of stainless steels. 2. Can also be used to weld grades 321 and 347 when service temperatures do not exceed 600°F.
Weld Metal Composition
M-308L
AWS ER308LSi
Carbon
Mechanical Properties
AWS ER308L
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
82,672
T-S (psi)
85,572
T-S (psi)
95,725
El
44 %
El
42 %
El
33 %
32 °F:90
IV (J)
32 °F:110
IV (J)
32 °F:92
Chromium
IV (J)
19.80 %
-321 °F:60
-40 °F:89
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
-321 °F:82
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
CWB, TUV
Supplier... For The Highest Demands WELDING PRODUCTS
41
0.02 % 0.75 % 1.45 % 14.5 % 23.20 % 2.61 %
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information All position welding possible with proper welding equipment and procedures.
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-312
Welding of heat-resistant austenitic steels of the 25%Cr-20%Ni types(STS310S). It has good general oxidation resistance, especially at high temperature.
Welding of stainless steel of the 29%Cr-9%Ni types. Wire is widely used for joining of dissimilar metals such as carbon steel to stainless steel.
1. Developed primarily for welding type 310 stainless. 2. Can also be used to join types 410 and 430 stainless when preheating and heat treatment are not practical.
1. Type 312 was originally designed to join high temperature heat resistant alloys as well as strength high alloy steels to themselves and some dissimilar metals 2. 312 can also be used to join some abrasion resistant steels.
0.02 %
Carbon
0.10 %
Carbon
0.10 %
Silicon
0.75 %
Silicon
0.10 %
Silicon
0.43 %
Manganese
2.28 %
Manganese
1.73 %
Manganese
1.72 % 8.70 %
Welding of austenitic stainless alloys of the 22%Cr-12%Ni low carbon types and for joining stainless steels to non-alloy or low-alloy steels. The high silicon content improves the welding properties, such as wetting. 1. Designed primarily for the joining of 309 stainless where good wetting and bead appearance are important. 2. The additional silicon aids in smooth bead contour and superior wetting into the adjacent base metal. 3. Service temperatures below 750°F. Carbon
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
85,572
T-S (psi)
87,023
T-S (psi)
105,878
El
40 %
El
40 %
El
30 %
IV (J)
32 °F:90
IV (J)
32 °F:110
IV (J)
Nickel
13.70 %
Nickel
20.90 %
Nickel
Chromium
23.20 %
Chromium
26.60 %
Chromium
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
-
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non- pulsed welding is more limited to flat and horizontal welding.
Approved
Packaging
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
30.40 %
Welding Positions
Available Sizes / Rec. Parameters
Typical Applications
M-310
Characteristics Of Usage
AWS ER312
Weld Metal Composition
M-309LSi
AWS ER310
Mechanical Properties
AWS ER309LSi
Supplier... For The Highest Demands WELDING PRODUCTS
42
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Stainless Steel
AWS ER316
M-316
AWS ER316L
M-316L
AWS ER316LSi
Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types. The alloy has particularly good corrosion-resistance and heat-resistance.
Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types. The high silicon content improves the welding properties, such as wetting.
Designed for use on type 316 L and 316 grade austenitic stainless steels.
Carbon Silicon Manganese Nickel Chromium Molybdenum
Typical Applications Characteristics Of Usage
Designed for use on type 316 austenitic stainless steels.
Weld Metal Composition
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
84,122
T-S (psi)
84,122
T-S (psi)
82,672
El
38 %
El
38 %
El
30 %
IV (J)
32°F:100
IV (J)
32°F:90
IV (J)
0.04 % 0.40 % 1.62 % 12.10 % 18.40 % 2.30 %
0.02 % 0.39 % 1.89 % 11.80 % 18.60 % 2.20 %
1. Designed for use for type 316L grade stainless steel. 2 The additional silicon greatly enhances wetting of the weld bead that enhances the cosmetics of the bead appearance when required.
Carbon Silicon Manganese Chromium Nickel Molybdenum
385 °F:62
385 °F:50 Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Detailed Packaging Information
Detailed Packaging Information
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.
BV, DNV, KR
ABS, TUV
Approved
Packaging
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
32°F:110 -321 °F:40
Dia in (mm) (0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
0.02 % 0.76 % 1.85 % 12.20 % 18.70 % 2.30 %
Welding Positions
Available Sizes / Rec. Parameters
Welding of stainless steel of 18%Cr-12%Ni-Mo types (STS316). The low ferrite content improves the crack-resistance and corrosion resistance.
Mechanical Properties
M-316LSi
Supplier... For The Highest Demands WELDING PRODUCTS
43
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-409Nb
Welding of stainless alloys of the 18%Cr-9%Ni-Nb(Ti) types (STS 321, 347). Nb component improves the resistance to intergranular corrosion of the weld metal.
Welding of ferrite stainless alloys of the 13%Cr types (AISI409). It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange.
1. Designed for welding of grades 347 and 321 stabilized austenitic stainless steels. 2. Operating temperatures should not
1. This product was designed for welding Niobium stabilized stainless. 2. The added Nb helps to form stable carbides that promote improved resistance to corrosion with stronger properties at elevated temperatures.
Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum
Welding of stainless alloys of the 19%Cr-12%Ni-3.5%Mo low carbon types (STS317, 317L). Various applications of chemical engineering, shipbuilding and nuclear plant industries, etc.
1. Recommended for welding type 317 and 317L stainless steels with up to .04 % carbon in the weld deposit. 2. The higher Molybdenum content increases the resistance to pitting corrosion.
Carbon Silicon Manganese Nickel Chromium Molybdenum SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
92,824
T-S (psi)
92,824
T-S (psi)
4,438 (1562°F)
El
40 %
El
41 %
El
56 %
IV (J)
0.02 % 0.48 % 1.09 % 13.10 % 18.90 % 3.40 %
-
exceed 750 °F.
IV (J)
0.05 % 0.46 % 2.24 % 9.30 % 19.30 % 0.60 %
-
Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum
IV (J)
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
M-347
Characteristics Of Usage
AWS ER409Nb
Weld Metal Composition
M-317L
AWS ER347
Mechanical Properties
AWS ER317L
Supplier... For The Highest Demands WELDING PRODUCTS
44
0.01 % 0.45 % 0.46 % 0.23 % 11.40 % 0.36 %
-
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.
Call Customer Service For Availability: 1.877.754.7935
Call Customer Service For Availability: 1.877.754.7935
MIG Wires
Call Customer Service For Availability: 1.877.754.7935
Stainless Steel
M-430
Welding of martensite stainless alloys of the 13%Cr types (STS 420). The alloy is suitable for the first layer of corrosion resistant weld claddings.
Welding of ferrite stainless alloys of the 17%Cr types (AISI 430, dissimilar steels). It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange.
1. Type 420 is a martensitic stainless steel that provides corrosion resistance similar to Type 410 plus increased strength and hardness 2. Typical uses include cutlery, surgical and dental instruments, scissors, tapes and straight edges.
1. Alloy 430 is a ferritic stainless which provides good ductility in heat-treated condition. 2. Used in the application of welding similar alloys as well as for overlays and thermal spraying. 3. A minimum of 300ºF before welding.
Carbon Silicon Manganese Nickel Chromium
Carbon Silicon Manganese Nickel Chromium
Welding of martensite stainless alloys of the 13%Cr types (STS 403, 410). The alloy is suitable for the first layer of corrosion resistant weld claddings.
1. Alloy 410 is used to weld Types 403, 405, 410 and 416. 2. Alloy 410 is also used for welding overlay on carbon steels to resist corrosion, erosion, or abrasion.
Carbon Silicon Manganese Nickel Chromium
SG
Ar+2 % O2
SG
Ar+2 % O2
SG
Ar+2 % O2
T-S (psi)
78,320
T-S (psi)
-
T-S (psi)
73,969
El
35 %
El
-
El
35 %
Remark
PWHT:1373 °F x 1hr
5%H2SO4
-
Remark
PWHT:1373 °F x 1hr
0.02 % 0.34 % 0.39 % 12.80 %
0.33 % 0.41 % 0.37 % 12.70 %
Dia in (mm)
Dia in (mm)
Dia in (mm)
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
.030 .035 .040 .045 .052 1/16
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
Approved
Welding Positions
Packaging
Available Sizes / Rec. Parameters
Typical Applications
M-420
Characteristics Of Usage
AWS ER430
Weld Metal Composition
M-410
AWS ER420
Mechanical Properties
AWS ER410
Supplier... For The Highest Demands WELDING PRODUCTS
45
0.02 % 0.33 % 0.44 % 16.60 %
(0.8) (0.9) (1.0) (1.2) (1.4) (1.6)
Detailed Packaging Information
