Laser-Cut Square Grille Spec Sheet
SQ-412 / Laser-Cut Square Grille Spec Sheet
1.75”
9.75” 12.00”
MODEL: SQ-412 • • • • •
Duct Size Dimensions: 10.00” x 2.25” Outside Dimensions: 12.00” x 3.50” Design Dimensions: 9.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-414 / Laser-Cut Square Grille Spec Sheet
1.75”
11.75” 14.00”
MODEL: SQ-414 • • • • •
Duct Size Dimensions: 12.00” x 2.25” Outside Dimensions: 14.00” x 3.50” Design Dimensions: 11.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-416 / Laser-Cut Square Grille Spec Sheet
1.75”
13.75” 16.00”
MODEL: SQ-416 • • • • •
Duct Size Dimensions: 14.00” x 2.25” Outside Dimensions: 16.00” x 3.50” Design Dimensions: 13.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-610 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
7.75” 10.00”
MODEL: SQ-610 • • • • •
Duct Size Dimensions: 8.00” x 4.00” Outside Dimensions: 10.00” x 5.50” Design Dimensions: 7.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-612 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
9.75” 12.00”
MODEL: SQ-612 • • • • •
Duct Size Dimensions: 10.00” x 4.00” Outside Dimensions: 12.00” x 5.50” Design Dimensions: 9.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-614 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
11.75” 14.00”
MODEL: SQ-614 • • • • •
Duct Size Dimensions: 12.00” x 4.00” Outside Dimensions: 14.00” x 5.50” Design Dimensions: 11.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-616 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
13.75” 16.00”
MODEL: SQ-616 • • • • •
Duct Size Dimensions: 14.00” x 4.00” Outside Dimensions: 16.00” x 5.50” Design Dimensions: 13.42” x 3.50” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-808 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
5.75” 8.00”
MODEL: SQ-808 • • • • •
Duct Size Dimensions: 6.00” x 6.00” Outside Dimensions: 8.00” x 8.00” Design Dimensions: 5.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-812 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
9.75” 12.00”
MODEL: SQ-812 • • • • •
Duct Size Dimensions: 10.00” x 6.00” Outside Dimensions: 12.00” x 8.00” Design Dimensions: 9.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-814 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
11.75” 14.00”
MODEL: SQ-814 • • • • •
Duct Size Dimensions: 12.00” x 6.00” Outside Dimensions: 14.00” x 8.00” Design Dimensions: 11.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-816 / Laser-Cut Square Grille Spec Sheet
5.75”
13.75” 16.00”
MODEL: SQ-816 • • • • •
Duct Size Dimensions: 14.00” x 6.00” Outside Dimensions: 16.00” x 8.00” Design Dimensions: 13.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-824 / Laser-Cut Square Grille Spec Sheet
5.75”
21.75” 24.00”
MODEL: SQ-824 • • • • •
Duct Size Dimensions: 22.00” x 6.00” Outside Dimensions: 24.00” x 8.00” Design Dimensions: 21.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-826 / Laser-Cut Square Grille Spec Sheet
5.75”
23.75” 26.00”
MODEL: SQ-826 • • • • •
Duct Size Dimensions: 24.00” x 6.00” Outside Dimensions: 26.00” x 8.00” Design Dimensions: 23.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-832 / Laser-Cut Square Grille Spec Sheet
5.75”
29.75” 32.00”
MODEL: SQ-832 • • • • •
Duct Size Dimensions: 30.00” x 6.00” Outside Dimensions: 32.00” x 8.00” Design Dimensions: 29.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-1010 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
7.75” 10.00”
MODEL: SQ-1010 • • • • •
Duct Size Dimensions: 8.00” x 8.00” Outside Dimensions: 10.00” x 10.00” Design Dimensions: 7.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1012 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
9.75” 12.00”
MODEL: SQ-1012 • • • • •
Duct Size Dimensions: 10.00” x 8.00” Outside Dimensions: 12.00” x 10.00” Design Dimensions: 9.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1014 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
11.75” 14.00”
MODEL: SQ-1014 • • • • •
Duct Size Dimensions: 12.00” x 8.00” Outside Dimensions: 14.00” x 10.00” Design Dimensions: 11.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1016 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
13.75” 16.00”
MODEL: SQ-1016 • • • • •
Duct Size Dimensions: 14.00” x 8.00” Outside Dimensions: 16.00” x 10.00” Design Dimensions: 13.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1122 / Laser-Cut Square Grille Spec Sheet
8.75” 11.00”
19.75” 22.00”
MODEL: SQ-1122 • • • • •
Duct Size Dimensions: 20.00” x 9.00” Outside Dimensions: 22.00” x 11.00” Design Dimensions: 19.75” x 8.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1212 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
9.75” 12.00”
MODEL: SQ-1212 • • • • •
Duct Size Dimensions: 10.00” x 10.00” Outside Dimensions: 12.00” x 12.00” Design Dimensions: 9.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1214 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
11.75” 14.00”
MODEL: SQ-1214 • • • • •
Duct Size Dimensions: 12.00” x 10.00” Outside Dimensions: 14.00” x 12.00” Design Dimensions: 11.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1216 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
13.75” 16.00”
MODEL: SQ-1216 • • • • •
Duct Size Dimensions: 14.00” x 10.00” Outside Dimensions: 16.00” x 12.00” Design Dimensions: 13.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1414 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
11.75” 14.50”
MODEL: SQ-1414 • • • • •
Duct Size Dimensions: 12.00” x 12.00” Outside Dimensions: 14.50” x 14.50” Design Dimensions: 11.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1416 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
13.75” 16.50”
MODEL: SQ-1416 • • • • •
Duct Size Dimensions: 14.00” x 12.00” Outside Dimensions: 16.50” x 14.50” Design Dimensions: 13.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1426 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
23.75” 26.50”
MODEL: SQ-1426 • • • • •
Duct Size Dimensions: 24.00” x 12.00” Outside Dimensions: 26.50” x 14.50” Design Dimensions: 23.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1616 / Laser-Cut Square Grille Spec Sheet
13.75”
16.50”
13.75” 16.50”
MODEL: SQ-1616 • • • • •
Duct Size Dimensions: 14.00” x 14.00” Outside Dimensions: 16.50” x 16.50” Design Dimensions: 13.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1620 / Laser-Cut Square Grille Spec Sheet
13.75”
16.63”
17.75” 20.50”
MODEL: SQ-1620 • • • • •
Duct Size Dimensions: 18.00” x 14.00” Outside Dimensions: 20.50” x 16.63” Design Dimensions: 17.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1727 / Laser-Cut Square Grille Spec Sheet
13.75”
17.00”
23.75” 27.00”
MODEL: SQ-1727 • • • • •
Duct Size Dimensions: 24.00” x 14.00” Outside Dimensions: 27.00” x 17.00” Design Dimensions: 23.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1733 / Laser-Cut Square Grille Spec Sheet
13.75”
17.00”
29.75” 33.00”
MODEL: SQ-1733 • • • • •
Duct Size Dimensions: 30.00” x 14.00” Outside Dimensions: 33.00” x 17.00” Design Dimensions: 29.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2020 / Laser-Cut Square Grille Spec Sheet
17.75”
20.50”
17.75” 20.50”
MODEL: SQ-2020 • • • • •
Duct Size Dimensions: 18.00” x 18.00” Outside Dimensions: 20.50” x 20.50” Design Dimensions: 17.75” x 17.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2032 / Laser-Cut Square Grille Spec Sheet
17.75”
20.50”
29.75” 32.50”
MODEL: SQ-2032 • • • • •
Duct Size Dimensions: 30.00” x 18.00” Outside Dimensions: 32.50” x 20.50” Design Dimensions: 29.75” x 17.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2626 / Laser-Cut Square Grille Spec Sheet
23.75”
26.45”
23.75” 26.45”
MODEL: SQ-2626 • • • • •
Duct Size Dimensions: 24.00” x 24.00” Outside Dimensions: 26.50” x 26.50” Design Dimensions: 23.75” x 23.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-3232 / Laser-Cut Square Grille Spec Sheet
28.75”
32.00”
28.75” 32.00”
MODEL: SQ-3232 • • • • •
Duct Size Dimensions: 29.63” x 29.63” Outside Dimensions: 32.00” x 32.00” Design Dimensions: 28.75” x 28.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
1.75”
9.75” 12.00”
MODEL: SQ-412 • • • • •
Duct Size Dimensions: 10.00” x 2.25” Outside Dimensions: 12.00” x 3.50” Design Dimensions: 9.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-414 / Laser-Cut Square Grille Spec Sheet
1.75”
11.75” 14.00”
MODEL: SQ-414 • • • • •
Duct Size Dimensions: 12.00” x 2.25” Outside Dimensions: 14.00” x 3.50” Design Dimensions: 11.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-416 / Laser-Cut Square Grille Spec Sheet
1.75”
13.75” 16.00”
MODEL: SQ-416 • • • • •
Duct Size Dimensions: 14.00” x 2.25” Outside Dimensions: 16.00” x 3.50” Design Dimensions: 13.75” x 1.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
3.50”
SQ-610 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
7.75” 10.00”
MODEL: SQ-610 • • • • •
Duct Size Dimensions: 8.00” x 4.00” Outside Dimensions: 10.00” x 5.50” Design Dimensions: 7.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-612 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
9.75” 12.00”
MODEL: SQ-612 • • • • •
Duct Size Dimensions: 10.00” x 4.00” Outside Dimensions: 12.00” x 5.50” Design Dimensions: 9.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-614 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
11.75” 14.00”
MODEL: SQ-614 • • • • •
Duct Size Dimensions: 12.00” x 4.00” Outside Dimensions: 14.00” x 5.50” Design Dimensions: 11.75” x 3.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-616 / Laser-Cut Square Grille Spec Sheet
3.75”
5.50”
13.75” 16.00”
MODEL: SQ-616 • • • • •
Duct Size Dimensions: 14.00” x 4.00” Outside Dimensions: 16.00” x 5.50” Design Dimensions: 13.42” x 3.50” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-808 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
5.75” 8.00”
MODEL: SQ-808 • • • • •
Duct Size Dimensions: 6.00” x 6.00” Outside Dimensions: 8.00” x 8.00” Design Dimensions: 5.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-812 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
9.75” 12.00”
MODEL: SQ-812 • • • • •
Duct Size Dimensions: 10.00” x 6.00” Outside Dimensions: 12.00” x 8.00” Design Dimensions: 9.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-814 / Laser-Cut Square Grille Spec Sheet
5.75”
8.00”
11.75” 14.00”
MODEL: SQ-814 • • • • •
Duct Size Dimensions: 12.00” x 6.00” Outside Dimensions: 14.00” x 8.00” Design Dimensions: 11.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-816 / Laser-Cut Square Grille Spec Sheet
5.75”
13.75” 16.00”
MODEL: SQ-816 • • • • •
Duct Size Dimensions: 14.00” x 6.00” Outside Dimensions: 16.00” x 8.00” Design Dimensions: 13.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-824 / Laser-Cut Square Grille Spec Sheet
5.75”
21.75” 24.00”
MODEL: SQ-824 • • • • •
Duct Size Dimensions: 22.00” x 6.00” Outside Dimensions: 24.00” x 8.00” Design Dimensions: 21.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-826 / Laser-Cut Square Grille Spec Sheet
5.75”
23.75” 26.00”
MODEL: SQ-826 • • • • •
Duct Size Dimensions: 24.00” x 6.00” Outside Dimensions: 26.00” x 8.00” Design Dimensions: 23.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-832 / Laser-Cut Square Grille Spec Sheet
5.75”
29.75” 32.00”
MODEL: SQ-832 • • • • •
Duct Size Dimensions: 30.00” x 6.00” Outside Dimensions: 32.00” x 8.00” Design Dimensions: 29.75” x 5.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
8.00”
SQ-1010 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
7.75” 10.00”
MODEL: SQ-1010 • • • • •
Duct Size Dimensions: 8.00” x 8.00” Outside Dimensions: 10.00” x 10.00” Design Dimensions: 7.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1012 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
9.75” 12.00”
MODEL: SQ-1012 • • • • •
Duct Size Dimensions: 10.00” x 8.00” Outside Dimensions: 12.00” x 10.00” Design Dimensions: 9.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1014 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
11.75” 14.00”
MODEL: SQ-1014 • • • • •
Duct Size Dimensions: 12.00” x 8.00” Outside Dimensions: 14.00” x 10.00” Design Dimensions: 11.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1016 / Laser-Cut Square Grille Spec Sheet
7.75”
10.00”
13.75” 16.00”
MODEL: SQ-1016 • • • • •
Duct Size Dimensions: 14.00” x 8.00” Outside Dimensions: 16.00” x 10.00” Design Dimensions: 13.75” x 7.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1122 / Laser-Cut Square Grille Spec Sheet
8.75” 11.00”
19.75” 22.00”
MODEL: SQ-1122 • • • • •
Duct Size Dimensions: 20.00” x 9.00” Outside Dimensions: 22.00” x 11.00” Design Dimensions: 19.75” x 8.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1212 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
9.75” 12.00”
MODEL: SQ-1212 • • • • •
Duct Size Dimensions: 10.00” x 10.00” Outside Dimensions: 12.00” x 12.00” Design Dimensions: 9.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1214 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
11.75” 14.00”
MODEL: SQ-1214 • • • • •
Duct Size Dimensions: 12.00” x 10.00” Outside Dimensions: 14.00” x 12.00” Design Dimensions: 11.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1216 / Laser-Cut Square Grille Spec Sheet
9.75”
12.00”
13.75” 16.00”
MODEL: SQ-1216 • • • • •
Duct Size Dimensions: 14.00” x 10.00” Outside Dimensions: 16.00” x 12.00” Design Dimensions: 13.75” x 9.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1414 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
11.75” 14.50”
MODEL: SQ-1414 • • • • •
Duct Size Dimensions: 12.00” x 12.00” Outside Dimensions: 14.50” x 14.50” Design Dimensions: 11.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1416 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
13.75” 16.50”
MODEL: SQ-1416 • • • • •
Duct Size Dimensions: 14.00” x 12.00” Outside Dimensions: 16.50” x 14.50” Design Dimensions: 13.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1426 / Laser-Cut Square Grille Spec Sheet
11.75”
14.50”
23.75” 26.50”
MODEL: SQ-1426 • • • • •
Duct Size Dimensions: 24.00” x 12.00” Outside Dimensions: 26.50” x 14.50” Design Dimensions: 23.75” x 11.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1616 / Laser-Cut Square Grille Spec Sheet
13.75”
16.50”
13.75” 16.50”
MODEL: SQ-1616 • • • • •
Duct Size Dimensions: 14.00” x 14.00” Outside Dimensions: 16.50” x 16.50” Design Dimensions: 13.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1620 / Laser-Cut Square Grille Spec Sheet
13.75”
16.63”
17.75” 20.50”
MODEL: SQ-1620 • • • • •
Duct Size Dimensions: 18.00” x 14.00” Outside Dimensions: 20.50” x 16.63” Design Dimensions: 17.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1727 / Laser-Cut Square Grille Spec Sheet
13.75”
17.00”
23.75” 27.00”
MODEL: SQ-1727 • • • • •
Duct Size Dimensions: 24.00” x 14.00” Outside Dimensions: 27.00” x 17.00” Design Dimensions: 23.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-1733 / Laser-Cut Square Grille Spec Sheet
13.75”
17.00”
29.75” 33.00”
MODEL: SQ-1733 • • • • •
Duct Size Dimensions: 30.00” x 14.00” Outside Dimensions: 33.00” x 17.00” Design Dimensions: 29.75” x 13.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2020 / Laser-Cut Square Grille Spec Sheet
17.75”
20.50”
17.75” 20.50”
MODEL: SQ-2020 • • • • •
Duct Size Dimensions: 18.00” x 18.00” Outside Dimensions: 20.50” x 20.50” Design Dimensions: 17.75” x 17.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2032 / Laser-Cut Square Grille Spec Sheet
17.75”
20.50”
29.75” 32.50”
MODEL: SQ-2032 • • • • •
Duct Size Dimensions: 30.00” x 18.00” Outside Dimensions: 32.50” x 20.50” Design Dimensions: 29.75” x 17.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-2626 / Laser-Cut Square Grille Spec Sheet
23.75”
26.45”
23.75” 26.45”
MODEL: SQ-2626 • • • • •
Duct Size Dimensions: 24.00” x 24.00” Outside Dimensions: 26.50” x 26.50” Design Dimensions: 23.75” x 23.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
SQ-3232 / Laser-Cut Square Grille Spec Sheet
28.75”
32.00”
28.75” 32.00”
MODEL: SQ-3232 • • • • •
Duct Size Dimensions: 29.63” x 29.63” Outside Dimensions: 32.00” x 32.00” Design Dimensions: 28.75” x 28.75” Free Air: 56% Made in USA
JOB NAME: LOCATION: ARCHITECT: ENGINEER: CONTRACTOR:
OPTIONS: • Material: Aluminum Steel • Thickness: 1⁄8” 3⁄16” ¼” • Finish: Black Grey Silver Sun Gold White Oil-Rubbed Bronze • With Holes (as shown) No Holes (cross out holes on drawing) • Underside Lip No Underside Lip • With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille • Wall and Ceiling Installation: requires Holes/screws • Floor Installation: •
Requires Underside Lip when you choose No Holes
•
Thickness 1⁄8” not recommended
SUBMITTED BY:
1.800.880.3090
www.reggioregister.com
31 Jytek Road, Leominster, MA 01453
