led flat panel
4
1 LED FLAT PANEL LED FLAT PANEL LED FLAT PANEL
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION LEAVEPLEASE A COPYREAD FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION PLEASE READFOR THESE CAREFULLY BEFORE INSTALLATION LEAVE A COPY THEINSTRUCTIONS USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE
IMPORTANT INSTALLATION INFORMATION
IMPORTANT INSTALLATION INFORMATION IMPORTANT INSTALLATION INFORMATION WARNING
RISK OF ELECTRIC WARNING SHOCK WARNING RISK OF ELECTRIC SHOCK Disconnect power performing RISK OF before ELECTRIC SHOCKinstallation or maintenance Verify that supply correct byinstallation comparingorit maintenance with the luminaire Disconnect powervoltage beforeisperforming label information. Verifypower that supply is correct by comparing it with the luminaire Disconnect beforevoltage performing installation or maintenance • Make all electrical grounded connections in accordance with the latest labelsupply information. Verify that voltage is correct by comparing it with the luminaire edition National Electricconnections Code (NEC) in and applicablewith localthe code information. Make of all the electrical grounded accordance latest label requirements. of thegrounded National connections Electric Codein(NEC) and applicable Make alledition electrical accordance with thelocal latestcode • If requirements. the supply wire is damaged. It must be replaced by the manufacturer edition of the National Electric Code (NEC) and applicable local code a similar Itqualified in order avoid a orIfits theservice supplyagent wire isordamaged. must beperson replaced by thetomanufacturer requirements. hazard. or its wire service agent or a Itsimilar qualifi ed person in order to avoid a If the supply is damaged. must be replaced by the manufacturer • Allhazard. wiring connections should be capped with UL approved wire or its service agent or a similar qualified person in order to avoid a connections. All wiring connections should be capped with UL approved wire hazard. • Toconnections. reduce the risk of fire or electrical shock, do not expose this All wiring connections should be capped with UL approved wire rain apparatus To reducetothe riskorofmoisture. fire or electrical shock, do not expose this connections. apparatus to rain or moisture. To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. • • x x x
x
x x
x x x x x x x x x x x
x
WARNING WARNING RISK OF BURNS RISK OF BURNS WARNING
x x
• Do not exceed RISK maximum wattage on luminaire label. OF BURNS Do notallexceed maximumwarnings wattage on label. • Follow manufacturer’s andluminaire recommendations for the driver Followtype, all manufacturer’s warnings and replacements recommendations for the mounting position, methods, and recycling. Do not exceed maximum wattage on luminaire label. driver type, mounting position, methods, replacements and recycling. Follow all manufacturer’s warnings and recommendations for the driver type, mounting position, methods, replacements and recycling.
WARNING CAUTION WARNING WARNING CAUTION • Suitable for mounting on normally flammable surfaces. CAUTION • Suitable Do not dispose of electrical appliances as unsorted municipal waste, for mounting on normally flammable surfaces. use separate collection facilities. Suitable Do for notmounting dispose ofonelectrical unsorted municipal waste, normallyappliances flammableassurfaces. • use If electrical appliances are disposed of in landfill or dumps, hazardous separate collectionappliances facilities. Do not dispose of electrical as unsorted municipal waste, can be damaging to health well-being. use separate Ifsubstances electrical appliances are disposed of inand landfi ll or dumps, hazardous collection facilities. • substances Contact yourcan local government for information regarding the collection damaging andll well-being. If electrical appliancesbeare disposedtoofhealth in landfi or dumps, hazardous system available. substances Contact your local government for information regarding the collection can be damaging to health and well-being. • system This device is not intended for use with emergency exit fixtures or Contact your available. local government for information regarding the collection emergency system This device isexit notlights. intended for use with emergency exit fixtures or available. • emergency To reduce the risk of electrical shock, do not remove cover and caps, lights. This device is notexit intended for use with emergency exit fixtures or fitting must be grounded. emergency To reduce risk of electrical shock, do not remove cover and caps, exit the lights. • fiNo user-serviceable parts inside. tting must be grounded. To reduce the risk of electrical shock, do not remove cover and caps, user-serviceable parts inside. • Do notbeuse when enclosure is broken. fittingNo must grounded. Do not use when enclosure broken. does not expose wiring to edges • To prevent wiring damage No user-serviceable parts inside.oris abrasion of sheet metal or damage other sharp objects.does not expose wiring to edges Do notTo prevent or abrasion use whenwiring enclosure is broken. sheetLocation. metal or other sharp objects. • of Damp To prevent wiring damage or abrasion does not expose wiring to edges Indoor useoronly. • Thismetal product mustsharp be installed of sheet other objects.in accordance with the applicable installation code by a person familiar with the construction and IndoorThis useproduct only. must be installed in accordance with the applicable operation ofcode the by product andfamiliar hazardswith involved installation a person the construction and This product must be product installedand in accordance with the applicable of the hazards involved • operation Vapor barrier must be suitable for 90ºc installation code by a person familiar with the construction and Vapor barrier must be suitable for 90ºc operation of the product and hazards involved Vapor barrier must be suitableWARNING for 90ºc WARNING RISK OF FIRE RISK OF FIRE WARNING Keep any combustable andFIRE other materials that can burn away form RISK OF Keep any combustable and other materials that can burn away form the luminaires. luminaires. • the Incorrect installation may result in electrical shock or a risk of a fire any combustable andmay other materials that can burn Keep Incorrect installation result in electrical shock or away a risk form of a fire the luminaires. Incorrect installation may result in electrical shock or a risk of a fire •
x x
For Models For Models For Models 1x4 (40W)
AR-LP114C4DD/30 AR-LP114C4DD/35 AR-LP114C4DD/40 AR-LP114C4DD/50 1x4 (40W) AR-LP114BDD/35 AR-LP114BDD/40 AR-LP114BDD/50 2x2 (30W) AR-LP122C3DD/30 AR-LP122C3DD/35 AR-LP122C3DD/40 AR-LP122C3DD/50 2x2 (30W) AR-LP122B3DD/35 AR-LP122B3DD/40 AR-LP122B3DD/50 1x4 (40W)AR-LP122C4DD/30 AR-LP114BDD/35 AR-LP122C4DD/35 AR-LP114BDD/40 AR-LP122C4DD/40 AR-LP114BDD/50 AR-LP122C4DD/50 2x2 (40W) 2x2 (40W) AR-LP122BDD/35 AR-LP122BDD/40 AR-LP122BDD/50 2x2 (30W)AR-LP122C5DD/30 AR-LP122B3DD/35AR-LP122C5DD/35 AR-LP122B3DD/40AR-LP122C5DD/40 AR-LP122B3DD/50 AR-LP122C5DD/50 2x2 (50W) 2x2 (60W) AR-LP122B6DD/35 AR-LP122B6DD/40 AR-LP122B6DD/50 2x2 (40W)AR-LP124C5DD/30 AR-LP122BDD/35 AR-LP124C5DD/35 AR-LP122BDD/40 AR-LP124C5DD/40 AR-LP122BDD/50 AR-LP124C5DD/50 2x4 (50W) 2x4 (50W) AR-LP124BDD/35 AR-LP124BDD/40 AR-LP124BDD/50 2x2 (60W) AR-LP122B6DD/35 AR-LP122B6DD/40 AR-LP122B6DD/50 2x4 (60W) AR-LP124C6DD/30 AR-LP124C6DD/35 AR-LP124C6DD/40 AR-LP124C6DD/50 2x4 (75W) AR-LP124B7DD/35 AR-LP124B7DD/40 AR-LP124B7DD/50 2x4 (50W) AR-LP124BDD/35 AR-LP124BDD/40 AR-LP124BDD/50 2x4 (75W)
AR-LP124B7DD/35
AR-LP124B7DD/40
AR-LP124B7DD/50
Aurora Lighting Inc., 12035 34th St N, Suite 2, St Petersburg, FL 33716 Website: [email protected] Website: www.auroralighting.com www.auroralighting.com Email: [email protected] Document V2_16 Document Version - IS_AR-LPxxxCxDD IS_AR-LP1xxXXXX V2_15 Website: www.auroralighting.com Email: [email protected] Last Revised - 06/30/16 08/21/15 Document Version - IS_AR-LP1xxXXXX V2_15 Last Revised - 08/21/15
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL:
PORTANT: IMPORTANT: READ CAREFULLY READ CAREFULLY BEFORE INSTALLING BEFORE INSTALLING FIXTURE. FIXTURE. RETAIN FOR RETAIN FUTURE FORREFERENCE. FUTURE REFERENCE. INSTALLATION INSTRUCTIONS: NERAL:GENERAL:
2 2
1. Turn off main power before installing. TALLATION INSTALLATION INSTRUCTIONS: INSTRUCTIONS:
2. Remove the ceiling panel or fluorescent fixture and disconnect wiring and any mounting brackets that were used if any. 3. Fix safety cable mounting brackets to the LED panel. urn off 1. main Turnpower off main before power installing. before installing. 5. Remove the junction box cover on the back of the LED panel. Remove2.the Remove ceilingthe panel ceiling or fluorescent panel or fluorescent fixture andfidisconnect xture and disconnect wiring andwiring any mounting and any brackets mountingthat brackets were used that were if any.used (Figure if any. 1) (Figure 1) 4. Connect the Line, Neutral and Ground wires from the supply side to the LED driver inside the junction box through the supply side knockout hole using an appropriate ix safety 3.connector cable Fix safety mounting mounting tobrackets the topanel the LED (Figure panel 2). (Figure 2). tocable securebrackets the supply lineLED to the junction box. Additional steps are required for dimming models (See Page 3). Remove5.6. the Remove junctionthe box junction cover box cover back onof the theback theLED LEDpanel panel. Replace the cover onon thethe junction box. FitLED theofpanel. flat into the ceiling and attach safety cable to safety cable mounting brackets and secure the safety cable to the theLine, requirements of local building codes or tosupply meet seismic requirements. Connect4.building the Connect Line,per Neutral the andNeutral Groundand wires Ground from wires the supply from the side to thelocal side LED to driver the LED (Figure driver 3) inside (Figurethe 3) junction inside thebox junction through box thethrough supply the sidesupply knockout sidehole knockout using hole an appropriate using an appropriate nector connector to7.secure to secure supply the line supply totest thepanel. line junction to thebox. junction Additional box. Additional steps are required steps areforrequired dimming formodels dimming (See models Page (See 3). Page 3). Turn onthe main power and
DIMMABLE WIRING INSTRUCTIONS:
3 3
DIMMABLE DIMMABLE WIRINGWIRING INSTRUCTIONS: INSTRUCTIONS: Dimmable models come with an additional knockout hole in the junction box on the dimming side of the LED driver. DimmableDimmable models come models withcome an additional with an additional knockout knockout hole in thehole junction in thebox junction onLED thebox dimming on the side dimming of theside LEDofdriver. the LED driver. Panel
L (Black)
LED Driver/ Junction Box
L N e
N (White) E (Earth) DIM+
(Purple)
DIM-
(Grey)
Replace6.the Replace cover on thethe cover junction on thebox. junction Fit thebox. flatFit LED thepanel flat LED into panel the ceiling into the andceiling attachand safety attach cable safety to safety cablecable to safety mounting cable brackets mountingand brackets secureand thesecure safety the cable safety to the cable to the Installation Guide ding per building the requirements per the requirements of local building of localcodes building or tocodes meetorlocal to meet seismic localrequirements seismic requirements (Figure 4). (Figure 4). urn on 7. main Turnpower on main andpower test panel. and test panel. 1.Open the junction box of LED Panel.
To wire multiple To wiredimming multiple panels dimming to panels one standard to one 0-10v standard dimmer 0-10vuse dimmer the schematic use the schematic below. Thebelow. maximum The maximum number ofnumber panels of that panels can be that dimmed can bedepends dimmedon depends the on the capabilitycapability and capacity andofcapacity the dimmer. of theWire dimmer. usingWire plenum usingrated plenum low rated voltage low wire voltage and appropriate wire and appropriate connector.connector.
To wire multiple dimming panels to one standard 0-10v dimmer use the schematic below. The maximum number of panels that can be dimmed depends on the capability and capacity of the dimmer. Wire using plenum rated low voltage wire and appropriate connector. LED PANEL
LED Driver/ Junction Box
LED PANEL
L (Black)
L (Black)
N (White) e (Earth)
N (White) e (Earth)
DIM+
(Purple)
(Purple)
DIM+
DIM-
(Grey)
(Grey)
DIM-
+
0-10V DIMMER
-
LED PANEL
LED Driver/
LED PANEL
L (Black)
L (Black)
N (White) e (Earth)
N (White) e (Earth)
NON-DIMMING NON-DIMMING WIRINGWIRING INSTRUCTIONS: INSTRUCTIONS: Junction Box DIM+ DIM-
1.Replace existing lighting fixture from ceiling with LED Panel.
LED Driver/ Junction Box
(Purple)
(Purple)
DIM+
(Grey)
(Grey)
DIM-
LED Driver/ Junction Box
LED PanelLED Junction PanelBox Junction Box
Switch Switch L N
L N
G (Green)G (Green)
L (Brown)L (Brown)
LED N (Blue) N (Blue)
DIM+
Driver LED Driver DIM-
DIM+ (Blue) (Blue) Do not connect Do not theconnect DIM+ and the DIMDIM+wires and DIMto a dimmer. wires to a dimmer. DIM(White) (White)Add a wirenut Addtoa the wirenut end of to each the end wireoftoeach insulate wire it. to insulate it.
WARRANTY WARRANTY WARRANTY
The Installation must be carried out by an electrician.
This product This hasproduct a warranty has aofwarranty period ofof5 period years from of 5 years the date fromof the purchase. date of The purchase. warranty Theiswarranty invalid inisthe invalid caseinofthe improper case ofuse, improper installation, use, installation, tampering, tampering, and removaland of removal the Q.C. of date the Q.C. date This product has a warranty of period of 5 years from the date of purchase. The warranty is invalid in the case of improper use, installation, tampering, and removal of the Q.C. date label, installation label, installation in an improper in anworking improper environment working environment or installation or installation not according not to according the current to the edition current of the edition National of theElectric National Code. Electric Should Code. thisShould productthis failproduct during the fail during warranty the warranty label, installation in an improper working environment or installation not according to the current edition of the National Electric Code. Should this product fail during the warranty period it willperiod be replaced it will befree replaced of charge, free subject of charge, to correct subject installation to correct installation and return and of the return faultyofunit. the faulty Auroraunit. doesAurora not accept does not responsibility accept responsibility for any installation for any installation costs associated costs associated with with period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Aurora does not accept responsibility for any installation costs associated with the replacement the replacement of this product. of this This product. warranty Thisiswarranty in addition is in to addition the statutory to therights statutory in your rights country in your of purchase. country ofAurora purchase. reserves Aurorathereserves right to the alterright specifi to alter cations specifi without cations prior without notice.prior notice. the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Aurora reserves the right to alter specifications without prior notice.
1 LED FLAT PANEL LED FLAT PANEL LED FLAT PANEL
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION LEAVEPLEASE A COPYREAD FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION PLEASE READFOR THESE CAREFULLY BEFORE INSTALLATION LEAVE A COPY THEINSTRUCTIONS USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE
IMPORTANT INSTALLATION INFORMATION
IMPORTANT INSTALLATION INFORMATION IMPORTANT INSTALLATION INFORMATION WARNING
RISK OF ELECTRIC WARNING SHOCK WARNING RISK OF ELECTRIC SHOCK Disconnect power performing RISK OF before ELECTRIC SHOCKinstallation or maintenance Verify that supply correct byinstallation comparingorit maintenance with the luminaire Disconnect powervoltage beforeisperforming label information. Verifypower that supply is correct by comparing it with the luminaire Disconnect beforevoltage performing installation or maintenance • Make all electrical grounded connections in accordance with the latest labelsupply information. Verify that voltage is correct by comparing it with the luminaire edition National Electricconnections Code (NEC) in and applicablewith localthe code information. Make of all the electrical grounded accordance latest label requirements. of thegrounded National connections Electric Codein(NEC) and applicable Make alledition electrical accordance with thelocal latestcode • If requirements. the supply wire is damaged. It must be replaced by the manufacturer edition of the National Electric Code (NEC) and applicable local code a similar Itqualified in order avoid a orIfits theservice supplyagent wire isordamaged. must beperson replaced by thetomanufacturer requirements. hazard. or its wire service agent or a Itsimilar qualifi ed person in order to avoid a If the supply is damaged. must be replaced by the manufacturer • Allhazard. wiring connections should be capped with UL approved wire or its service agent or a similar qualified person in order to avoid a connections. All wiring connections should be capped with UL approved wire hazard. • Toconnections. reduce the risk of fire or electrical shock, do not expose this All wiring connections should be capped with UL approved wire rain apparatus To reducetothe riskorofmoisture. fire or electrical shock, do not expose this connections. apparatus to rain or moisture. To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. • • x x x
x
x x
x x x x x x x x x x x
x
WARNING WARNING RISK OF BURNS RISK OF BURNS WARNING
x x
• Do not exceed RISK maximum wattage on luminaire label. OF BURNS Do notallexceed maximumwarnings wattage on label. • Follow manufacturer’s andluminaire recommendations for the driver Followtype, all manufacturer’s warnings and replacements recommendations for the mounting position, methods, and recycling. Do not exceed maximum wattage on luminaire label. driver type, mounting position, methods, replacements and recycling. Follow all manufacturer’s warnings and recommendations for the driver type, mounting position, methods, replacements and recycling.
WARNING CAUTION WARNING WARNING CAUTION • Suitable for mounting on normally flammable surfaces. CAUTION • Suitable Do not dispose of electrical appliances as unsorted municipal waste, for mounting on normally flammable surfaces. use separate collection facilities. Suitable Do for notmounting dispose ofonelectrical unsorted municipal waste, normallyappliances flammableassurfaces. • use If electrical appliances are disposed of in landfill or dumps, hazardous separate collectionappliances facilities. Do not dispose of electrical as unsorted municipal waste, can be damaging to health well-being. use separate Ifsubstances electrical appliances are disposed of inand landfi ll or dumps, hazardous collection facilities. • substances Contact yourcan local government for information regarding the collection damaging andll well-being. If electrical appliancesbeare disposedtoofhealth in landfi or dumps, hazardous system available. substances Contact your local government for information regarding the collection can be damaging to health and well-being. • system This device is not intended for use with emergency exit fixtures or Contact your available. local government for information regarding the collection emergency system This device isexit notlights. intended for use with emergency exit fixtures or available. • emergency To reduce the risk of electrical shock, do not remove cover and caps, lights. This device is notexit intended for use with emergency exit fixtures or fitting must be grounded. emergency To reduce risk of electrical shock, do not remove cover and caps, exit the lights. • fiNo user-serviceable parts inside. tting must be grounded. To reduce the risk of electrical shock, do not remove cover and caps, user-serviceable parts inside. • Do notbeuse when enclosure is broken. fittingNo must grounded. Do not use when enclosure broken. does not expose wiring to edges • To prevent wiring damage No user-serviceable parts inside.oris abrasion of sheet metal or damage other sharp objects.does not expose wiring to edges Do notTo prevent or abrasion use whenwiring enclosure is broken. sheetLocation. metal or other sharp objects. • of Damp To prevent wiring damage or abrasion does not expose wiring to edges Indoor useoronly. • Thismetal product mustsharp be installed of sheet other objects.in accordance with the applicable installation code by a person familiar with the construction and IndoorThis useproduct only. must be installed in accordance with the applicable operation ofcode the by product andfamiliar hazardswith involved installation a person the construction and This product must be product installedand in accordance with the applicable of the hazards involved • operation Vapor barrier must be suitable for 90ºc installation code by a person familiar with the construction and Vapor barrier must be suitable for 90ºc operation of the product and hazards involved Vapor barrier must be suitableWARNING for 90ºc WARNING RISK OF FIRE RISK OF FIRE WARNING Keep any combustable andFIRE other materials that can burn away form RISK OF Keep any combustable and other materials that can burn away form the luminaires. luminaires. • the Incorrect installation may result in electrical shock or a risk of a fire any combustable andmay other materials that can burn Keep Incorrect installation result in electrical shock or away a risk form of a fire the luminaires. Incorrect installation may result in electrical shock or a risk of a fire •
x x
For Models For Models For Models 1x4 (40W)
AR-LP114C4DD/30 AR-LP114C4DD/35 AR-LP114C4DD/40 AR-LP114C4DD/50 1x4 (40W) AR-LP114BDD/35 AR-LP114BDD/40 AR-LP114BDD/50 2x2 (30W) AR-LP122C3DD/30 AR-LP122C3DD/35 AR-LP122C3DD/40 AR-LP122C3DD/50 2x2 (30W) AR-LP122B3DD/35 AR-LP122B3DD/40 AR-LP122B3DD/50 1x4 (40W)AR-LP122C4DD/30 AR-LP114BDD/35 AR-LP122C4DD/35 AR-LP114BDD/40 AR-LP122C4DD/40 AR-LP114BDD/50 AR-LP122C4DD/50 2x2 (40W) 2x2 (40W) AR-LP122BDD/35 AR-LP122BDD/40 AR-LP122BDD/50 2x2 (30W)AR-LP122C5DD/30 AR-LP122B3DD/35AR-LP122C5DD/35 AR-LP122B3DD/40AR-LP122C5DD/40 AR-LP122B3DD/50 AR-LP122C5DD/50 2x2 (50W) 2x2 (60W) AR-LP122B6DD/35 AR-LP122B6DD/40 AR-LP122B6DD/50 2x2 (40W)AR-LP124C5DD/30 AR-LP122BDD/35 AR-LP124C5DD/35 AR-LP122BDD/40 AR-LP124C5DD/40 AR-LP122BDD/50 AR-LP124C5DD/50 2x4 (50W) 2x4 (50W) AR-LP124BDD/35 AR-LP124BDD/40 AR-LP124BDD/50 2x2 (60W) AR-LP122B6DD/35 AR-LP122B6DD/40 AR-LP122B6DD/50 2x4 (60W) AR-LP124C6DD/30 AR-LP124C6DD/35 AR-LP124C6DD/40 AR-LP124C6DD/50 2x4 (75W) AR-LP124B7DD/35 AR-LP124B7DD/40 AR-LP124B7DD/50 2x4 (50W) AR-LP124BDD/35 AR-LP124BDD/40 AR-LP124BDD/50 2x4 (75W)
AR-LP124B7DD/35
AR-LP124B7DD/40
AR-LP124B7DD/50
Aurora Lighting Inc., 12035 34th St N, Suite 2, St Petersburg, FL 33716 Website: [email protected] Website: www.auroralighting.com www.auroralighting.com Email: [email protected] Document V2_16 Document Version - IS_AR-LPxxxCxDD IS_AR-LP1xxXXXX V2_15 Website: www.auroralighting.com Email: [email protected] Last Revised - 06/30/16 08/21/15 Document Version - IS_AR-LP1xxXXXX V2_15 Last Revised - 08/21/15
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL:
PORTANT: IMPORTANT: READ CAREFULLY READ CAREFULLY BEFORE INSTALLING BEFORE INSTALLING FIXTURE. FIXTURE. RETAIN FOR RETAIN FUTURE FORREFERENCE. FUTURE REFERENCE. INSTALLATION INSTRUCTIONS: NERAL:GENERAL:
2 2
1. Turn off main power before installing. TALLATION INSTALLATION INSTRUCTIONS: INSTRUCTIONS:
2. Remove the ceiling panel or fluorescent fixture and disconnect wiring and any mounting brackets that were used if any. 3. Fix safety cable mounting brackets to the LED panel. urn off 1. main Turnpower off main before power installing. before installing. 5. Remove the junction box cover on the back of the LED panel. Remove2.the Remove ceilingthe panel ceiling or fluorescent panel or fluorescent fixture andfidisconnect xture and disconnect wiring andwiring any mounting and any brackets mountingthat brackets were used that were if any.used (Figure if any. 1) (Figure 1) 4. Connect the Line, Neutral and Ground wires from the supply side to the LED driver inside the junction box through the supply side knockout hole using an appropriate ix safety 3.connector cable Fix safety mounting mounting tobrackets the topanel the LED (Figure panel 2). (Figure 2). tocable securebrackets the supply lineLED to the junction box. Additional steps are required for dimming models (See Page 3). Remove5.6. the Remove junctionthe box junction cover box cover back onof the theback theLED LEDpanel panel. Replace the cover onon thethe junction box. FitLED theofpanel. flat into the ceiling and attach safety cable to safety cable mounting brackets and secure the safety cable to the theLine, requirements of local building codes or tosupply meet seismic requirements. Connect4.building the Connect Line,per Neutral the andNeutral Groundand wires Ground from wires the supply from the side to thelocal side LED to driver the LED (Figure driver 3) inside (Figurethe 3) junction inside thebox junction through box thethrough supply the sidesupply knockout sidehole knockout using hole an appropriate using an appropriate nector connector to7.secure to secure supply the line supply totest thepanel. line junction to thebox. junction Additional box. Additional steps are required steps areforrequired dimming formodels dimming (See models Page (See 3). Page 3). Turn onthe main power and
DIMMABLE WIRING INSTRUCTIONS:
3 3
DIMMABLE DIMMABLE WIRINGWIRING INSTRUCTIONS: INSTRUCTIONS: Dimmable models come with an additional knockout hole in the junction box on the dimming side of the LED driver. DimmableDimmable models come models withcome an additional with an additional knockout knockout hole in thehole junction in thebox junction onLED thebox dimming on the side dimming of theside LEDofdriver. the LED driver. Panel
L (Black)
LED Driver/ Junction Box
L N e
N (White) E (Earth) DIM+
(Purple)
DIM-
(Grey)
Replace6.the Replace cover on thethe cover junction on thebox. junction Fit thebox. flatFit LED thepanel flat LED into panel the ceiling into the andceiling attachand safety attach cable safety to safety cablecable to safety mounting cable brackets mountingand brackets secureand thesecure safety the cable safety to the cable to the Installation Guide ding per building the requirements per the requirements of local building of localcodes building or tocodes meetorlocal to meet seismic localrequirements seismic requirements (Figure 4). (Figure 4). urn on 7. main Turnpower on main andpower test panel. and test panel. 1.Open the junction box of LED Panel.
To wire multiple To wiredimming multiple panels dimming to panels one standard to one 0-10v standard dimmer 0-10vuse dimmer the schematic use the schematic below. Thebelow. maximum The maximum number ofnumber panels of that panels can be that dimmed can bedepends dimmedon depends the on the capabilitycapability and capacity andofcapacity the dimmer. of theWire dimmer. usingWire plenum usingrated plenum low rated voltage low wire voltage and appropriate wire and appropriate connector.connector.
To wire multiple dimming panels to one standard 0-10v dimmer use the schematic below. The maximum number of panels that can be dimmed depends on the capability and capacity of the dimmer. Wire using plenum rated low voltage wire and appropriate connector. LED PANEL
LED Driver/ Junction Box
LED PANEL
L (Black)
L (Black)
N (White) e (Earth)
N (White) e (Earth)
DIM+
(Purple)
(Purple)
DIM+
DIM-
(Grey)
(Grey)
DIM-
+
0-10V DIMMER
-
LED PANEL
LED Driver/
LED PANEL
L (Black)
L (Black)
N (White) e (Earth)
N (White) e (Earth)
NON-DIMMING NON-DIMMING WIRINGWIRING INSTRUCTIONS: INSTRUCTIONS: Junction Box DIM+ DIM-
1.Replace existing lighting fixture from ceiling with LED Panel.
LED Driver/ Junction Box
(Purple)
(Purple)
DIM+
(Grey)
(Grey)
DIM-
LED Driver/ Junction Box
LED PanelLED Junction PanelBox Junction Box
Switch Switch L N
L N
G (Green)G (Green)
L (Brown)L (Brown)
LED N (Blue) N (Blue)
DIM+
Driver LED Driver DIM-
DIM+ (Blue) (Blue) Do not connect Do not theconnect DIM+ and the DIMDIM+wires and DIMto a dimmer. wires to a dimmer. DIM(White) (White)Add a wirenut Addtoa the wirenut end of to each the end wireoftoeach insulate wire it. to insulate it.
WARRANTY WARRANTY WARRANTY
The Installation must be carried out by an electrician.
This product This hasproduct a warranty has aofwarranty period ofof5 period years from of 5 years the date fromof the purchase. date of The purchase. warranty Theiswarranty invalid inisthe invalid caseinofthe improper case ofuse, improper installation, use, installation, tampering, tampering, and removaland of removal the Q.C. of date the Q.C. date This product has a warranty of period of 5 years from the date of purchase. The warranty is invalid in the case of improper use, installation, tampering, and removal of the Q.C. date label, installation label, installation in an improper in anworking improper environment working environment or installation or installation not according not to according the current to the edition current of the edition National of theElectric National Code. Electric Should Code. thisShould productthis failproduct during the fail during warranty the warranty label, installation in an improper working environment or installation not according to the current edition of the National Electric Code. Should this product fail during the warranty period it willperiod be replaced it will befree replaced of charge, free subject of charge, to correct subject installation to correct installation and return and of the return faultyofunit. the faulty Auroraunit. doesAurora not accept does not responsibility accept responsibility for any installation for any installation costs associated costs associated with with period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Aurora does not accept responsibility for any installation costs associated with the replacement the replacement of this product. of this This product. warranty Thisiswarranty in addition is in to addition the statutory to therights statutory in your rights country in your of purchase. country ofAurora purchase. reserves Aurorathereserves right to the alterright specifi to alter cations specifi without cations prior without notice.prior notice. the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Aurora reserves the right to alter specifications without prior notice.
