LLB w/AC 12
Indoor HID
Features • Hinge and latched optical assembly for ease of maintenance. • Stainless steel latches and hinge standard. • One piece, die cast aluminum housing with white polyester powder finish for excellent corrosion and impact resistance.
• UL 1598 listed wet location. • One piece injection-molded lens 100% virgin acrylic, sealed to reflector. Optional polycarbonate lens. ). • AC12 is available in Type V distribution.
• UL listed 40°C ambient for all lamp wattages listed.
LLB w/AC 12
• Optional NSF Certification for Non Food Zone.
Low Bay
• Use "0" rated, protected metal halide lamps only.
Dimensions
16-3/8" (415.9 mm)
13-1/4" (336.6 mm)
Offers high efficiency and a wide distribution of light. Use for general purpose industrial lighting, parking garages, loading docks, aisles, and storage areas. Type V distribution is standard.
Many luminaire components, such as reflectors, refractors, lenses, sockets and lampholders are made from various types of plastics which can be adversely affected by airborne contaminants. If chemicals, petroleum based products or cleaning solutions are expected in the intended area of use consult factory for compatibility. See Compatibility tables on page 847.
E
Standard Metal Halide 175W Not available in USA
12-1/8" (308 mm)
Green Product Choice: LLB175PMT-PSC-OR-AC12 BALLAST ASSEMBLY
OPTICAL
–
LLB
Footnotes
Ballast Assembly LLB
M – Metal Halide S – High Pressure Sodium P – Pulse Start Metal Halide (PSC Ballast option must be specified to comply with EISA for 175W-250W)
035 – 35 MED23 050 – 50 MED5 070 – 70 MED 100 – 100 MED 150 – 150 M MED 150 – 150 S MOG 175 – 175 MOG4
5
" OR" Option required for metal halide and pulse start metal halide lamps (Exclusionary socket). See pages 828-836 for additional options and accessories.
Voltage
Wattage
Not available in High Pressure Sodium. DT only. 120V High Pressure Sodium only. 30 Pluse Start Metal Halide only. 32 Not available in 35, 50, or 70 Watt Metal Halide. 4
Options
Lamp Type
48 – 48032 DT – 120/277 MT – 120/208/240/277 1N – 120 NPF HPS only
23
General Notes
Reflector
AC12 – Acrylic Closed Bottom PC12 – Polycarbonate Closed Bottom
All options are factory installed. All accessories are field installed. See Pages 851-853 for ballast electrical data. *Ballast assembly and optical assembly to be ordered and shipped separately. Warning: Refer to and follow the lamp manufacturer's warnings and instructions.
(Shipped in Separate Carton)
For more information concerning LLB Low Bay, consult specification sheet LB-11090 at www.daybrite. com. Consult the website and other product literature for warranty information. Data subject to change without notice.
Philips Day-Brite, Solutions Volume 8
815
Features • Hinge and latched optical assembly for ease of maintenance. • Stainless steel latches and hinge standard. • One piece, die cast aluminum housing with white polyester powder finish for excellent corrosion and impact resistance.
• UL 1598 listed wet location. • One piece injection-molded lens 100% virgin acrylic, sealed to reflector. Optional polycarbonate lens. ). • AC12 is available in Type V distribution.
• UL listed 40°C ambient for all lamp wattages listed.
LLB w/AC 12
• Optional NSF Certification for Non Food Zone.
Low Bay
• Use "0" rated, protected metal halide lamps only.
Dimensions
16-3/8" (415.9 mm)
13-1/4" (336.6 mm)
Offers high efficiency and a wide distribution of light. Use for general purpose industrial lighting, parking garages, loading docks, aisles, and storage areas. Type V distribution is standard.
Many luminaire components, such as reflectors, refractors, lenses, sockets and lampholders are made from various types of plastics which can be adversely affected by airborne contaminants. If chemicals, petroleum based products or cleaning solutions are expected in the intended area of use consult factory for compatibility. See Compatibility tables on page 847.
E
Standard Metal Halide 175W Not available in USA
12-1/8" (308 mm)
Green Product Choice: LLB175PMT-PSC-OR-AC12 BALLAST ASSEMBLY
OPTICAL
–
LLB
Footnotes
Ballast Assembly LLB
M – Metal Halide S – High Pressure Sodium P – Pulse Start Metal Halide (PSC Ballast option must be specified to comply with EISA for 175W-250W)
035 – 35 MED23 050 – 50 MED5 070 – 70 MED 100 – 100 MED 150 – 150 M MED 150 – 150 S MOG 175 – 175 MOG4
5
" OR" Option required for metal halide and pulse start metal halide lamps (Exclusionary socket). See pages 828-836 for additional options and accessories.
Voltage
Wattage
Not available in High Pressure Sodium. DT only. 120V High Pressure Sodium only. 30 Pluse Start Metal Halide only. 32 Not available in 35, 50, or 70 Watt Metal Halide. 4
Options
Lamp Type
48 – 48032 DT – 120/277 MT – 120/208/240/277 1N – 120 NPF HPS only
23
General Notes
Reflector
AC12 – Acrylic Closed Bottom PC12 – Polycarbonate Closed Bottom
All options are factory installed. All accessories are field installed. See Pages 851-853 for ballast electrical data. *Ballast assembly and optical assembly to be ordered and shipped separately. Warning: Refer to and follow the lamp manufacturer's warnings and instructions.
(Shipped in Separate Carton)
For more information concerning LLB Low Bay, consult specification sheet LB-11090 at www.daybrite. com. Consult the website and other product literature for warranty information. Data subject to change without notice.
Philips Day-Brite, Solutions Volume 8
815
