Lyneo® Lx dimmers, switches and fan controls - Lutron
Lyneo Lx dimmers, switches and fan controls ®
2.94 in (75 mm) Product family features Matching dimmers and switches
•
On/off push button returns light to your favorite level and provides a large target
•
Round captive knob adjusts light to suit any activity
•
Amber locator light is easy to find in the dark
•
Voltage compensation maintains stable light levels, despite line voltage variations
•
4.69 in (119 mm)
Designer wallplate opening
100% factory tested
•
Coordinating Claro®, Satin Colors® and Stainless Steel wallplates only available separately
•
Custom engraving available for wallplates, see pg. 155
•
Control types
Single-pole (one location) 3-way or 4-way (two or more locations)
.30 in (7.6 mm) profile Direct load type compatibility Incandescent/halogen lighting Shown actual size: Lyneo Lx dimmer and 1-gang Claro wallplate in White (WH).
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Load type requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable for some additional load type, voltage and capacity combinations. For additional information, see pg. 174.
www.lutron.com | 1.800.523.9466 |
94
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Available finishes Use BOLD color code in model number (Example: LX-600PL-GB) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 160. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. www.lutron.com | 1.800.523.9466 |
95
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Dimmers and fan controls
Switches
Dimmers with locator light
Switches with locator light
Push button turns on/off
•
Slide up to brighten; down to dim
•
Push button turns on/off
•
Use with lighting loads or 1 HP motor loads (i.e., garbage disposals)
•
Includes locator light
•
Includes locator light
•
Fan controls Push button turns on/off
•
Slide up to increase speed; down to decrease speed
•
3-quiet fan speeds for increased comfort
•
Designed to prevent motor hum
•
www.lutron.com | 1.800.523.9466 |
96
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Connections overview Load connections*
Incandescent/ Halogen
Magnetic Low-Voltage
Electronic Low-Voltage
MLV Transformer (by others)
ELV Transformer (by others)
Incandescent/ Halogen Dimmer
MLV Dimmer
ELV Dimmer
Fluorescent Lighting
Lutron ® Dimming Ballasts
LED
Switched Lighting/Fans
Ceiling Fan
Lutron Hi-lume ® LED Driver
Fluorescent Dimmer
Fluorescent Dimmer (3-wire only)
Switch
Fan Control
Control types (for 2 or more locations) Dim from one location, switch from the others
Light Source
3-way Dimmer
3-way Switch
Light Source
3-way Dimmer
4-way Switch (1 or more)
3-way Switch
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
97
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Dimmer, fan control and switch model numbers
Dimmer model numbers
3-wire fluorescent dimmers*
Incandescent/halogen dimmers Preset dimmers with locator light
Preset dimmers with locator light
Single-pole 120 V 600 W Single-pole 120 V 1000 W
LX-600PL-CC
3-way 120 V 600 W 3-way 120 V 1000 W
LX-603PL-CC1
For use with Hi-lume®, Hi-lume® Compact SE, Hi-lume® 3D, Eco-10®, EcoSystem® ballasts.
LX-103PL-CC1
Also compatible with Hi-lume® LED driver.
1
3-way/single-pole 120 V 8 A 3-way/single-pole 277 V 6 A
LX-10PL-CC1
LXF-103PL-CC1 LXF-103PL-277-CC1
No derating required if ganged.
Magnetic low-voltage dimmers
Adjustable low-end trim.
Preset dimmers with locator light
Hi-lume® LED drivers: 3-wire fluorescent dimmers* Preset dimmers with locator light
Single-pole 120 V 600 VA (450 W) Single-pole 120 V 1000 VA (800 W)
LXLV-600PL-CC1
3-way 120 V 600 VA (450 W) 3-way 120 V 1000 VA (800 W)
LXLV-603PL-CC1
LXLV-10PL-CC1
LXLV-103PL-CC1
The stated VA (Volt-Ampere) rating includes the magnetic transformer heat losses and the lamp load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20% transformer loss.
3-way/single-pole 120 V 8 A 3-way/single-pole 277 V 6 A
LXF-103PL-CC1 LXF-103PL-277-CC1
For use with Hi-lume LED driver only. No derating required if ganged. Adjustable low-end trim. Fan control Fan controls—quiet 3-speed
Electronic low-voltage dimmers*
3-way/single-pole ceiling fan 120 V 1.5 A
Preset dimmers with locator light
No derating required if ganged.
Single-pole 120 V 600 W
LXELV-600PL-CC1
Switches
3-way 120 V 600 W
LXELV-603PL-CC1
Certain LED drivers are dimmable using an ELV dimmer, for more information, visit www.lutron.com/LED.
LXFSQ-F-CC1
Switches with locator light Single-pole non-dimmed lighting LX-1PSL-CC1 120 V 600 W/VA (5 A) or 1HP motor load 3-way non-dimmed lighting LX-3PSL-CC1 120 V 600 W/VA (5 A) or 1 HP motor load— 1000 W/VA (8 A) when used with 1000 W dimmer
CC1: Gloss and Satin color codes, see pg. 95 (Wallplates not included, order separately, see pg. 160)
4-way non-dimmed lighting LX-4PSL-CC1 120 V 600 W/VA (5 A) or 1 HP motor load— 1000 W/VA (8 A) when used with 1000 W dimmer
All models must be derated if ganged unless otherwise noted, see pg. 170.
No derating required if ganged.
*Requires neutral wire connection. www.lutron.com | 1.800.523.9466 |
98
Lyneo Lx dimmers, switches and fan controls ®
Accessories Wallplates
4.75 in (121 mm) Shown actual size: 2-gang Claro® wallplate in White (WH). For more information about Designer wallplates, see pg. 160.
4.69 in (119 mm)
Designer wallplate opening
.30 in (7.6 mm) profile
Coordinated electrical devices For more information about coordinated Designer electrical devices, see pg. 163.
Tamper resistant GFCI receptacle
Customizable 6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack 99
®
®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm)
Wallplates and accessories | Designer | Claro /Satin Colors
.30 in (7.6 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark ContourTM
•
All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Ganging and derating Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 172
•
Full line of wiring devices in designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin colors (SC-BI-)
•
Customize your designer wallplate with engraving, contact customer service to get started at 1.888.LUTRON1
•
www.lutron.com | 1.800.523.9466 |
160
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. www.lutron.com | 1.800.523.9466 |
161
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Wallplates for Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark® and Skylark ContourTM
CW-1-CC2 SC-1-CC4
4-gang* CW-4-CC2 SC-4-CC4 W: 8.37 in (213 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
2-gang* CW-2-CC2 SC-2-CC4 W: 4.75 in (121 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
5-gang* CW-5-CC2 SC-5-CC4 W: 10.18 in (259 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
1-gang* W: 2.94 in (75 mm); H: 4.69 in (119 mm) D: .30 in (7.6 mm)
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes.
3-gang* CW-3-CC2 SC-3-CC4 W: 6.56 in (167 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
CC2: Gloss and Stainless Steel color codes, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require derating, see pg. 170.
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. 162
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Receptacles
6-gang* CW-6-CC2 SC-6-CC4 W: 12.00 in (305 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
Tamper resistant receptacles 15 A, 125 V*
CARS-15-TR-CC3 SCRS-15-TR-CC4
20 A, 125 V*
SCRS-20-TR-CC4
Receptacles
Cable jacks F-style, 75-Ohm coaxial cable
•
15 A, 125 V*
CAR-15 H-CC3 SCR-15-CC4
20 A, 125 V*
SCR-20-CC4
GFCI Receptacles Press test button to confirm LED indicator status
•
Single cable jack*
Press reset button to reset GFCI after circuit interruption
•
CA-CJH-CC3 SC-CJ-CC4
Telephone jacks 6-conductor telephone jack, RJ11
•
Single telephone jack*
15 A, 125 V* GFCI
CAR-15-GFTR-CC3 SCR-15-GFTR-CC4
20 A, 125 V*
SCR-20-GFTR-CC4
GFCI
CA-PJH-CC3 SC-PJ-CC4
CC2: Gloss and Stainless Steel color codes, see pg. 161 3 CC : Gloss color codes, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Tamper resistant GFCI receptacles
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 163
Wallplates and accessories | Designer | Claro /Satin Colors ®
Receptacles for dimming use
®
Receptacles for dimming use
Duplex for dimming both connected loads
Duplex for dimming both connected loads
•
•
Projecting nubs prevent standard plugs from being used
Projecting nubs prevent standard plugs from being used
•
•
Requires replacement plugs for dimming use
Requires replacement plugs for dimming use
•
•
15 A model shown
Duplex for dimming use
•
15 A 15 A
120/125 V* 120/125 V*
CAR-15-DFDU-CC SCR-15-DFDU-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-DFDU-CC2 SCR-20-DFDU-CC4
Tamper resistant shutter mechanism
2
Receptacles for dimming use Top half for dimming
•
Projecting nub prevents standard plug from being used
•
Dual dimming tamper resistant 15 A 15 A
120/125 V* 120/125 V*
CAR-15-DDTR-CC2 SCR-15-DDTR-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-DDTR-CC2 SCR-20-DDTR-CC4
•
Receptacles for dimming use Top half for dimming
Requires replacement plugs for dimming use
•
•
Projecting nub prevents standard plug from being used
•
Bottom half is a general use receptacle and will fit standard duplex plugs
•
Requires replacement plugs for dimming use
•
Split duplex (half for dimming use)
Bottom half is a general use receptacle and will fit standard duplex plugs
•
15 A 15 A
120/125 V* 120/125 V*
CAR-15-HFDU-CC SCR-15-HFDU-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-HFDU-CC2 SCR-20-HFDU-CC4
2
15 A model shown
•
Tamper resistant shutter mechanism
•
Half dimming tamper resistant
CC2: Gloss color code and Stainless Steel, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
15 A 15 A
120/125 V* 120/125 V*
CAR-15-HDTR-CC2 SCR-15-HDTR-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-HDTR-CC2 SCR-20-HDTR-CC4
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 164
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Replacement plug for dimming (use with receptacles on left) This plug required for use with Lutron® receptacles for dimming use—plug will work in standard receptacle
•
Easily replaces the existing plugs on lamps
•
120/125 V White
RP-FDU-10-WH
120/125 V Brown
RP-FDU-10-BR
UL/CSA/NOM regulatory approvals. Important notes If the hot and dimmed hot feeds to the split duplex HFDU are supplied from different circuits or split-wired with separate switch-legs, a means to simultaneously disconnect these circuits must be provided at the panel board where they originate (NEC 210.7(C) 2002 Edition). A 2-pole circuit breaker or two single-pole circuit breakers with an approved handle tie can be used to accomplish this simultaneous disconnect. Feed-through dimming panels, which are those without breakers, are recommended when using the HFDU.
•
Receptacles and plugs for dimming use are UL listed for use with all Lutron® wallbox dimmers included in this catalog.
•
If there is only one electrical feed to the receptacle, then the duplex DFDU must be used.
•
For detailed information, see Application Notes #91 (Guide to Dimming Table Lamps) and #109 (Guide to Dimming Portable Lamps via Receptacles) at www.lutron.com/applicationnotes.
•
CC2: Gloss color code and Stainless Steel, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 164A
Wallplates and accessories | Designer | Claro /Satin Colors ®
Field customizable 6-port frame
®
Switches
Shipped with six blanks in matching colors
Paddle turns on/off
•
•
Use with any 15 A load
•
Connectors and wallplate sold separately
•
Connectors snap in (no tools required)
•
•
General purpose switching of all sources and motor loads
•
No derating if ganged
Connectors available in White (WH), unless noted
•
6-port frame*
CA-6PF-CC3 SC-6PF-CC4
Connectors for 6-port frame
Telephone/network jacks
8-conductor, RJ45 category 3
CON-1P-C3-EE4
8-conductor, RJ45 category 5e
CON-1P-C5E-EE4
8-conductor, RJ45 category 6
CON-1P-C6-EE4
Fiber jacks
MT-RJ feed through
CON-1F-MTRJ-WH CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
3-way 15 A*
CA-3PSH-CC3 SC-3PS-CC4
4-way 15 A*
CA-4PSH-CC3 SC-4PS-CC4
General purpose switch with locator light (120 V only) Single-pole
15 A*
3-way
15 A*
4-way
15 A*
CA-1PSNL-EE2 SC-1PSNL-EE10 CA-3PSNL-EE2 SC-3PSNL-EE10 CA-4PSNL-EE2 SC-4PSNL-EE10
CON-1C-EE4
BNC jack
BNC connector, 50-Ohm
CA-1PSH-CC3 SC-1PS-CC4
Cable jack
F-style, 75-Ohm coaxial cable
Single-pole 15 A*
SC simplex
General purpose switches (120/277 V)
CON-1B-WH
Connectors only for use with 6-port frame.
CC3: Gloss color codes, see pg. 161 CC4: Satin color codes, see pg. 161 EE2: Only available in Almond (AL), Ivory (IV), Light Almond (LA) and White (WH) EE4: Only available in White (WH) and Black (BL) EE10: Available in Biscuit (BI), Eggshell (ES), Goldstone (GS), Limestone (LS), Sea Glass (SG) and Snow (SW)
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. www.lutron.com | 1.800.523.9466 |
165
Appendix | Multi-ganging derating Appendix | Ganging andand derating How to understand ganging and derating Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pgs. 172–173
Custom ganging for Architectural style controls For Architectural style dimmers and switches, it is possible to retain the maximum capacity of dimmers in multi-gang applications via custom architectural multi-gang: •
•
• •
•
May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls Visit www.lutron.com/customganging for additional information
Standard ganging for dimmers, switches and accessories New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo® Nova Tb®
Maestro® Maestro IR® Maestro Wireless® Spacer System® Diva® Lyneo® Lx Skylark® Skylark ContourTM
Abella® Ceana® Ariadni® Glyder® Rotary
Derating Table 1 pg. 172
Derating Table 2 pg. 173
Derating Table 1 pg. 172
Derating Table 1 pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken Full capacity
One Nova Tb® dimmer
=
Standard 1-gang backbox
+
=
Three Nova Tb dimmers “Fins Broken” ganging
Standard 1-gang architectural wallplate
+
Standard 2-gang backbox
One fin broken* Partial derating
Two Nova Tb dimmers “Fins Broken” ganging
+
+
Standard 2-gang architectural wallplate
+
Standard 3-gang backbox
Inside: Two fins broken* Full derating
Standard 3-gang architectural wallplate
Outside: One fin broken* Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers “No Fins Broken” ganging
+
+
No fins broken Full capacity
Backbox with chase nipple
Custom architectural wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily. www.lutron.com | 1.800.523.9466 |
171
Appendix | Multi-ganging derating Appendix | Ganging andand derating Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix and derating Appendix| |Multi-ganging Ganging and derating Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Vierti®* pg. 14
capacity†
Incandescent/halogen 120 V
Magnetic low-voltage 120 V
Vareo® pg. 20
Nova Tb® Nova® pg. 34 pg. 26
Centurion® pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
WBX WBX WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8 A
3F
16 A
3F
5 A
PA
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions. *Consult Lutron Technical Support for information on interfaces with Vierti. † UL listed for FULL wattage indicated (derate capacity only if ganged with other devices). www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Maestro® Maestro Maestro Spacer pg. 46 IR® pg. 60 Wireless® System® pg. 68 pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V
M
M
Diva® pg. 86
M E
1000 W 1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W) 1000 VA (800 W)
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A
3F
3F
3F
16 A
3F
3F
3F
3F
8 A
3F
3F
3F
3F
16 A
3F
3F
3F
3F
5 A
PA
PA
16 A
TVI
TVI
TVI
TVI
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Lyneo® Lx Skylark pg. 94 ContourTM pg.100
Skylark® pg. 104
Abella® pg. 114
capacity†
Incandescent/halogen 120 V
M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W) 1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W 450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A 16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5 A
PA
16 A
TVI
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Ceana® pg. 120
Ariadni® pg. 124
Glyder® pg. 130
Rotary pg. 134
capacity†
Incandescent/halogen 120 V
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
8 A
3F
16 A
3F
5 A
PA
16 A
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Incandescent, magnetic and electronic low-voltage (120/277 V)
3-wire Fluorescent ballasts or Hi-lume® LED drivers (120/277 V)
0-10 VDC Ballasts or LED drivers (120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive Power Module*
Fluorescent Power Module*
0-10 V Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva® Gloss Diva Satin Colors®
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Tu-Wire® Fluorescent Ballasts (120 V)
Switched Lighting (120/277 V)
PA
SW
Phase Adaptive Power Module*
Switching Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva® Gloss Diva Satin Colors®
Technical notes
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
Lighting load interfaces must be matched to load type and voltage
•
•
•
•
•
•
All load interfaces for dimmed load are controlled by a 120 V 3-wire fluorescent dimmer Power feed to dimmer may differ from lighting load/interface voltage Interfaces typically require additional power feeds For wiring information, consult wiring diagrams, see pgs. 193-195 For assistance and additional solutions, consult Lutron Technical Support at 1.800.523.9466 (24 hours/7 days)
Interface mounting PHPM interfaces mount to 2-gang electrical backbox (W: 6.30 in x H: 5.10 in)
•
•
GRX-TVI enclosure is surface mount only (W: 6.10 in x H: 12.50 in x D: 3.30 in)
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
179
Addendum | Advanced conceptual connections Lyneo Lx ®
3-wire fluorescent dimming
2-wire fluorescent dimming Lamps:
Lamps:
Lamps:
Lamps:
U-Bent Linear
Hi-lume® 3D Ballasts
Compact Twin Tube U-Bent Linear
Compact Twin Tube
Compact SETM Ballasts
Hi-lume® Ballasts
EcoSystem® Ballasts
Compact U-Bent Linear
Tu-Wire® Ballasts
Eco-10® Ballasts
† †
Phase Adaptive Power Interface
3-Wire Fluorescent Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
Tu-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A32
Addendum | Advanced conceptual connections Lyneo Lx ®
0-10 V fluorescent dimming
LED dimming
Lamps: Low Voltage LED Lighting
Linear
0-10 V LED Drivers (by others)
0-10 V Ballasts (by others)
3-Wire Fluorescent Interface
0-10 V Interface
0-10 V Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
Hi-lume® LED Driver
†
3-Wire Fluorescent Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A33
Addendum | Advanced conceptual connections Lyneo Lx ®
Low Voltage dimming
Magnetic Low Voltage
Electronic Low Voltage
MLV Transformer (by others)
Ceiling Fan
Non-Dim Lighting
Switched Motors
ELV Transformer (by others)
†
†
Wallbox Phase Adaptive Interface
MLV Dimmer
Switched loads
Ceiling fan
3-Wire Fluorescent Dimmer
†
Wallbox Phase Adaptive Interface
ELV Dimmer
3-Wire Fluorescent Dimmer
Switching Module
Fan Control
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A34
2.94 in (75 mm) Product family features Matching dimmers and switches
•
On/off push button returns light to your favorite level and provides a large target
•
Round captive knob adjusts light to suit any activity
•
Amber locator light is easy to find in the dark
•
Voltage compensation maintains stable light levels, despite line voltage variations
•
4.69 in (119 mm)
Designer wallplate opening
100% factory tested
•
Coordinating Claro®, Satin Colors® and Stainless Steel wallplates only available separately
•
Custom engraving available for wallplates, see pg. 155
•
Control types
Single-pole (one location) 3-way or 4-way (two or more locations)
.30 in (7.6 mm) profile Direct load type compatibility Incandescent/halogen lighting Shown actual size: Lyneo Lx dimmer and 1-gang Claro wallplate in White (WH).
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Load type requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable for some additional load type, voltage and capacity combinations. For additional information, see pg. 174.
www.lutron.com | 1.800.523.9466 |
94
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Available finishes Use BOLD color code in model number (Example: LX-600PL-GB) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 160. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. www.lutron.com | 1.800.523.9466 |
95
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Dimmers and fan controls
Switches
Dimmers with locator light
Switches with locator light
Push button turns on/off
•
Slide up to brighten; down to dim
•
Push button turns on/off
•
Use with lighting loads or 1 HP motor loads (i.e., garbage disposals)
•
Includes locator light
•
Includes locator light
•
Fan controls Push button turns on/off
•
Slide up to increase speed; down to decrease speed
•
3-quiet fan speeds for increased comfort
•
Designed to prevent motor hum
•
www.lutron.com | 1.800.523.9466 |
96
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Connections overview Load connections*
Incandescent/ Halogen
Magnetic Low-Voltage
Electronic Low-Voltage
MLV Transformer (by others)
ELV Transformer (by others)
Incandescent/ Halogen Dimmer
MLV Dimmer
ELV Dimmer
Fluorescent Lighting
Lutron ® Dimming Ballasts
LED
Switched Lighting/Fans
Ceiling Fan
Lutron Hi-lume ® LED Driver
Fluorescent Dimmer
Fluorescent Dimmer (3-wire only)
Switch
Fan Control
Control types (for 2 or more locations) Dim from one location, switch from the others
Light Source
3-way Dimmer
3-way Switch
Light Source
3-way Dimmer
4-way Switch (1 or more)
3-way Switch
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
97
Designer wallplate opening
Lyneo Lx dimmers, switches and fan controls ®
Dimmer, fan control and switch model numbers
Dimmer model numbers
3-wire fluorescent dimmers*
Incandescent/halogen dimmers Preset dimmers with locator light
Preset dimmers with locator light
Single-pole 120 V 600 W Single-pole 120 V 1000 W
LX-600PL-CC
3-way 120 V 600 W 3-way 120 V 1000 W
LX-603PL-CC1
For use with Hi-lume®, Hi-lume® Compact SE, Hi-lume® 3D, Eco-10®, EcoSystem® ballasts.
LX-103PL-CC1
Also compatible with Hi-lume® LED driver.
1
3-way/single-pole 120 V 8 A 3-way/single-pole 277 V 6 A
LX-10PL-CC1
LXF-103PL-CC1 LXF-103PL-277-CC1
No derating required if ganged.
Magnetic low-voltage dimmers
Adjustable low-end trim.
Preset dimmers with locator light
Hi-lume® LED drivers: 3-wire fluorescent dimmers* Preset dimmers with locator light
Single-pole 120 V 600 VA (450 W) Single-pole 120 V 1000 VA (800 W)
LXLV-600PL-CC1
3-way 120 V 600 VA (450 W) 3-way 120 V 1000 VA (800 W)
LXLV-603PL-CC1
LXLV-10PL-CC1
LXLV-103PL-CC1
The stated VA (Volt-Ampere) rating includes the magnetic transformer heat losses and the lamp load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20% transformer loss.
3-way/single-pole 120 V 8 A 3-way/single-pole 277 V 6 A
LXF-103PL-CC1 LXF-103PL-277-CC1
For use with Hi-lume LED driver only. No derating required if ganged. Adjustable low-end trim. Fan control Fan controls—quiet 3-speed
Electronic low-voltage dimmers*
3-way/single-pole ceiling fan 120 V 1.5 A
Preset dimmers with locator light
No derating required if ganged.
Single-pole 120 V 600 W
LXELV-600PL-CC1
Switches
3-way 120 V 600 W
LXELV-603PL-CC1
Certain LED drivers are dimmable using an ELV dimmer, for more information, visit www.lutron.com/LED.
LXFSQ-F-CC1
Switches with locator light Single-pole non-dimmed lighting LX-1PSL-CC1 120 V 600 W/VA (5 A) or 1HP motor load 3-way non-dimmed lighting LX-3PSL-CC1 120 V 600 W/VA (5 A) or 1 HP motor load— 1000 W/VA (8 A) when used with 1000 W dimmer
CC1: Gloss and Satin color codes, see pg. 95 (Wallplates not included, order separately, see pg. 160)
4-way non-dimmed lighting LX-4PSL-CC1 120 V 600 W/VA (5 A) or 1 HP motor load— 1000 W/VA (8 A) when used with 1000 W dimmer
All models must be derated if ganged unless otherwise noted, see pg. 170.
No derating required if ganged.
*Requires neutral wire connection. www.lutron.com | 1.800.523.9466 |
98
Lyneo Lx dimmers, switches and fan controls ®
Accessories Wallplates
4.75 in (121 mm) Shown actual size: 2-gang Claro® wallplate in White (WH). For more information about Designer wallplates, see pg. 160.
4.69 in (119 mm)
Designer wallplate opening
.30 in (7.6 mm) profile
Coordinated electrical devices For more information about coordinated Designer electrical devices, see pg. 163.
Tamper resistant GFCI receptacle
Customizable 6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack 99
®
®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm)
Wallplates and accessories | Designer | Claro /Satin Colors
.30 in (7.6 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark ContourTM
•
All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Ganging and derating Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 172
•
Full line of wiring devices in designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin colors (SC-BI-)
•
Customize your designer wallplate with engraving, contact customer service to get started at 1.888.LUTRON1
•
www.lutron.com | 1.800.523.9466 |
160
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. www.lutron.com | 1.800.523.9466 |
161
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Wallplates for Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark® and Skylark ContourTM
CW-1-CC2 SC-1-CC4
4-gang* CW-4-CC2 SC-4-CC4 W: 8.37 in (213 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
2-gang* CW-2-CC2 SC-2-CC4 W: 4.75 in (121 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
5-gang* CW-5-CC2 SC-5-CC4 W: 10.18 in (259 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
1-gang* W: 2.94 in (75 mm); H: 4.69 in (119 mm) D: .30 in (7.6 mm)
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes.
3-gang* CW-3-CC2 SC-3-CC4 W: 6.56 in (167 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
CC2: Gloss and Stainless Steel color codes, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require derating, see pg. 170.
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. 162
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Receptacles
6-gang* CW-6-CC2 SC-6-CC4 W: 12.00 in (305 mm); H: 4.69 in (119 mm); D: .30 in (7.6 mm)
Tamper resistant receptacles 15 A, 125 V*
CARS-15-TR-CC3 SCRS-15-TR-CC4
20 A, 125 V*
SCRS-20-TR-CC4
Receptacles
Cable jacks F-style, 75-Ohm coaxial cable
•
15 A, 125 V*
CAR-15 H-CC3 SCR-15-CC4
20 A, 125 V*
SCR-20-CC4
GFCI Receptacles Press test button to confirm LED indicator status
•
Single cable jack*
Press reset button to reset GFCI after circuit interruption
•
CA-CJH-CC3 SC-CJ-CC4
Telephone jacks 6-conductor telephone jack, RJ11
•
Single telephone jack*
15 A, 125 V* GFCI
CAR-15-GFTR-CC3 SCR-15-GFTR-CC4
20 A, 125 V*
SCR-20-GFTR-CC4
GFCI
CA-PJH-CC3 SC-PJ-CC4
CC2: Gloss and Stainless Steel color codes, see pg. 161 3 CC : Gloss color codes, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Tamper resistant GFCI receptacles
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 163
Wallplates and accessories | Designer | Claro /Satin Colors ®
Receptacles for dimming use
®
Receptacles for dimming use
Duplex for dimming both connected loads
Duplex for dimming both connected loads
•
•
Projecting nubs prevent standard plugs from being used
Projecting nubs prevent standard plugs from being used
•
•
Requires replacement plugs for dimming use
Requires replacement plugs for dimming use
•
•
15 A model shown
Duplex for dimming use
•
15 A 15 A
120/125 V* 120/125 V*
CAR-15-DFDU-CC SCR-15-DFDU-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-DFDU-CC2 SCR-20-DFDU-CC4
Tamper resistant shutter mechanism
2
Receptacles for dimming use Top half for dimming
•
Projecting nub prevents standard plug from being used
•
Dual dimming tamper resistant 15 A 15 A
120/125 V* 120/125 V*
CAR-15-DDTR-CC2 SCR-15-DDTR-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-DDTR-CC2 SCR-20-DDTR-CC4
•
Receptacles for dimming use Top half for dimming
Requires replacement plugs for dimming use
•
•
Projecting nub prevents standard plug from being used
•
Bottom half is a general use receptacle and will fit standard duplex plugs
•
Requires replacement plugs for dimming use
•
Split duplex (half for dimming use)
Bottom half is a general use receptacle and will fit standard duplex plugs
•
15 A 15 A
120/125 V* 120/125 V*
CAR-15-HFDU-CC SCR-15-HFDU-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-HFDU-CC2 SCR-20-HFDU-CC4
2
15 A model shown
•
Tamper resistant shutter mechanism
•
Half dimming tamper resistant
CC2: Gloss color code and Stainless Steel, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
15 A 15 A
120/125 V* 120/125 V*
CAR-15-HDTR-CC2 SCR-15-HDTR-CC4
20 A 20 A
120/125 V* 120/125 V*
CAR-20-HDTR-CC2 SCR-20-HDTR-CC4
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 164
Wallplates and accessories | Designer | Claro /Satin Colors ®
®
Replacement plug for dimming (use with receptacles on left) This plug required for use with Lutron® receptacles for dimming use—plug will work in standard receptacle
•
Easily replaces the existing plugs on lamps
•
120/125 V White
RP-FDU-10-WH
120/125 V Brown
RP-FDU-10-BR
UL/CSA/NOM regulatory approvals. Important notes If the hot and dimmed hot feeds to the split duplex HFDU are supplied from different circuits or split-wired with separate switch-legs, a means to simultaneously disconnect these circuits must be provided at the panel board where they originate (NEC 210.7(C) 2002 Edition). A 2-pole circuit breaker or two single-pole circuit breakers with an approved handle tie can be used to accomplish this simultaneous disconnect. Feed-through dimming panels, which are those without breakers, are recommended when using the HFDU.
•
Receptacles and plugs for dimming use are UL listed for use with all Lutron® wallbox dimmers included in this catalog.
•
If there is only one electrical feed to the receptacle, then the duplex DFDU must be used.
•
For detailed information, see Application Notes #91 (Guide to Dimming Table Lamps) and #109 (Guide to Dimming Portable Lamps via Receptacles) at www.lutron.com/applicationnotes.
•
CC2: Gloss color code and Stainless Steel, see pg. 161 CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. 164A
Wallplates and accessories | Designer | Claro /Satin Colors ®
Field customizable 6-port frame
®
Switches
Shipped with six blanks in matching colors
Paddle turns on/off
•
•
Use with any 15 A load
•
Connectors and wallplate sold separately
•
Connectors snap in (no tools required)
•
•
General purpose switching of all sources and motor loads
•
No derating if ganged
Connectors available in White (WH), unless noted
•
6-port frame*
CA-6PF-CC3 SC-6PF-CC4
Connectors for 6-port frame
Telephone/network jacks
8-conductor, RJ45 category 3
CON-1P-C3-EE4
8-conductor, RJ45 category 5e
CON-1P-C5E-EE4
8-conductor, RJ45 category 6
CON-1P-C6-EE4
Fiber jacks
MT-RJ feed through
CON-1F-MTRJ-WH CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
3-way 15 A*
CA-3PSH-CC3 SC-3PS-CC4
4-way 15 A*
CA-4PSH-CC3 SC-4PS-CC4
General purpose switch with locator light (120 V only) Single-pole
15 A*
3-way
15 A*
4-way
15 A*
CA-1PSNL-EE2 SC-1PSNL-EE10 CA-3PSNL-EE2 SC-3PSNL-EE10 CA-4PSNL-EE2 SC-4PSNL-EE10
CON-1C-EE4
BNC jack
BNC connector, 50-Ohm
CA-1PSH-CC3 SC-1PS-CC4
Cable jack
F-style, 75-Ohm coaxial cable
Single-pole 15 A*
SC simplex
General purpose switches (120/277 V)
CON-1B-WH
Connectors only for use with 6-port frame.
CC3: Gloss color codes, see pg. 161 CC4: Satin color codes, see pg. 161 EE2: Only available in Almond (AL), Ivory (IV), Light Almond (LA) and White (WH) EE4: Only available in White (WH) and Black (BL) EE10: Available in Biscuit (BI), Eggshell (ES), Goldstone (GS), Limestone (LS), Sea Glass (SG) and Snow (SW)
*Stainless Steel finish only available as separate wallplate. Match with separate Black (BL) or Midnight (MN) controls and accessories. www.lutron.com | 1.800.523.9466 |
165
Appendix | Multi-ganging derating Appendix | Ganging andand derating How to understand ganging and derating Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pgs. 172–173
Custom ganging for Architectural style controls For Architectural style dimmers and switches, it is possible to retain the maximum capacity of dimmers in multi-gang applications via custom architectural multi-gang: •
•
• •
•
May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls Visit www.lutron.com/customganging for additional information
Standard ganging for dimmers, switches and accessories New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo® Nova Tb®
Maestro® Maestro IR® Maestro Wireless® Spacer System® Diva® Lyneo® Lx Skylark® Skylark ContourTM
Abella® Ceana® Ariadni® Glyder® Rotary
Derating Table 1 pg. 172
Derating Table 2 pg. 173
Derating Table 1 pg. 172
Derating Table 1 pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken Full capacity
One Nova Tb® dimmer
=
Standard 1-gang backbox
+
=
Three Nova Tb dimmers “Fins Broken” ganging
Standard 1-gang architectural wallplate
+
Standard 2-gang backbox
One fin broken* Partial derating
Two Nova Tb dimmers “Fins Broken” ganging
+
+
Standard 2-gang architectural wallplate
+
Standard 3-gang backbox
Inside: Two fins broken* Full derating
Standard 3-gang architectural wallplate
Outside: One fin broken* Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers “No Fins Broken” ganging
+
+
No fins broken Full capacity
Backbox with chase nipple
Custom architectural wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily. www.lutron.com | 1.800.523.9466 |
171
Appendix | Multi-ganging derating Appendix | Ganging andand derating Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix and derating Appendix| |Multi-ganging Ganging and derating Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Vierti®* pg. 14
capacity†
Incandescent/halogen 120 V
Magnetic low-voltage 120 V
Vareo® pg. 20
Nova Tb® Nova® pg. 34 pg. 26
Centurion® pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
WBX WBX WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8 A
3F
16 A
3F
5 A
PA
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions. *Consult Lutron Technical Support for information on interfaces with Vierti. † UL listed for FULL wattage indicated (derate capacity only if ganged with other devices). www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Maestro® Maestro Maestro Spacer pg. 46 IR® pg. 60 Wireless® System® pg. 68 pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V
M
M
Diva® pg. 86
M E
1000 W 1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W) 1000 VA (800 W)
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A
3F
3F
3F
16 A
3F
3F
3F
3F
8 A
3F
3F
3F
3F
16 A
3F
3F
3F
3F
5 A
PA
PA
16 A
TVI
TVI
TVI
TVI
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Lyneo® Lx Skylark pg. 94 ContourTM pg.100
Skylark® pg. 104
Abella® pg. 114
capacity†
Incandescent/halogen 120 V
M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W) 1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W 450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A 16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5 A
PA
16 A
TVI
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Ceana® pg. 120
Ariadni® pg. 124
Glyder® pg. 130
Rotary pg. 134
capacity†
Incandescent/halogen 120 V
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
8 A
3F
16 A
3F
5 A
PA
16 A
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Incandescent, magnetic and electronic low-voltage (120/277 V)
3-wire Fluorescent ballasts or Hi-lume® LED drivers (120/277 V)
0-10 VDC Ballasts or LED drivers (120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive Power Module*
Fluorescent Power Module*
0-10 V Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva® Gloss Diva Satin Colors®
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Tu-Wire® Fluorescent Ballasts (120 V)
Switched Lighting (120/277 V)
PA
SW
Phase Adaptive Power Module*
Switching Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva® Gloss Diva Satin Colors®
Technical notes
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
Lighting load interfaces must be matched to load type and voltage
•
•
•
•
•
•
All load interfaces for dimmed load are controlled by a 120 V 3-wire fluorescent dimmer Power feed to dimmer may differ from lighting load/interface voltage Interfaces typically require additional power feeds For wiring information, consult wiring diagrams, see pgs. 193-195 For assistance and additional solutions, consult Lutron Technical Support at 1.800.523.9466 (24 hours/7 days)
Interface mounting PHPM interfaces mount to 2-gang electrical backbox (W: 6.30 in x H: 5.10 in)
•
•
GRX-TVI enclosure is surface mount only (W: 6.10 in x H: 12.50 in x D: 3.30 in)
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
179
Addendum | Advanced conceptual connections Lyneo Lx ®
3-wire fluorescent dimming
2-wire fluorescent dimming Lamps:
Lamps:
Lamps:
Lamps:
U-Bent Linear
Hi-lume® 3D Ballasts
Compact Twin Tube U-Bent Linear
Compact Twin Tube
Compact SETM Ballasts
Hi-lume® Ballasts
EcoSystem® Ballasts
Compact U-Bent Linear
Tu-Wire® Ballasts
Eco-10® Ballasts
† †
Phase Adaptive Power Interface
3-Wire Fluorescent Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
Tu-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A32
Addendum | Advanced conceptual connections Lyneo Lx ®
0-10 V fluorescent dimming
LED dimming
Lamps: Low Voltage LED Lighting
Linear
0-10 V LED Drivers (by others)
0-10 V Ballasts (by others)
3-Wire Fluorescent Interface
0-10 V Interface
0-10 V Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
Hi-lume® LED Driver
†
3-Wire Fluorescent Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A33
Addendum | Advanced conceptual connections Lyneo Lx ®
Low Voltage dimming
Magnetic Low Voltage
Electronic Low Voltage
MLV Transformer (by others)
Ceiling Fan
Non-Dim Lighting
Switched Motors
ELV Transformer (by others)
†
†
Wallbox Phase Adaptive Interface
MLV Dimmer
Switched loads
Ceiling fan
3-Wire Fluorescent Dimmer
†
Wallbox Phase Adaptive Interface
ELV Dimmer
3-Wire Fluorescent Dimmer
Switching Module
Fan Control
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A34
