Master Disposers
Master Disposers
HEAVY DUTY FOODWASTE DISPOSERS
SERIES B 10-5/8" ROTOR AVAILABLE IN 3, 5, 7.5, 10 HP
APPLICATION:
Dishwashing areas and all food prep areas of large restaurants and institutional kitchens.
Chamber Mounting Control &
SPECIFICATIONS:
Disposer to be a Master Disposer Model B(HP) - Style Assm. - Voltage 10 5/8" Diameter Rotor/Turntable with exclusive adjustable 45° angle and 6 integral impact breakers constructed of hardened ductile steel alloy for long life use. Matching 45° Sizing Ring with 24 grind teeth constructed of hardened ductile steel alloy. Exclusive 8 ¼" throat opening to allow for faster feeding. Flexible neoprene collar to eliminate vibration and increase ease of installation. Versatile low body or offset grind chambers with force feed directional deflectors. Bolt on grind chamber allows replacement of all wearing parts without disturbing plumbing and electrical connections. Bolt on discharge flange for easy removal. Adjustable legs to level disposer and meet drain stub. Bolt on “Continuous Duty” motor for easy removal. Exclusive shaft extension with ¾" wrench flats to externally de-jam foreign matter without special tools. Heavy cast alloy construction providing an extra long life disposer.
MOUNTING ASSEMBLIES:
"L" LOW CHAMBER (STANDARD)
"SK" 8¼" Sink Adaptor
"O" OFFSET CHAMBER
"BC" 12" or 18" Bowl Cone (All assemblies include; water inlet, vacuum breaker, flow controls, solenoid valve, and silver saver)
ADAPTORS: Available for replacing any make disposer CONTROL GROUP: MC Magnetic Contactor w/ Overload Protection
("MS-1","MS-2", and "RMS-2" NOT AVAILABLE FOR "B" SERIES.)
AUTOMATIC REVERSING CONTROL CENTERS: RAC1 Auto Rev Timed Water Afterun Timed Motor Afterun Auto Off Feature
RAC2 Auto Rev Timed Water Afterun Timed Motor Afterun Auto Off Feature Lighted Push Buttons Line Disconnect Handle
EXAMPLE OF DATA SEQUENCE FOR SPECIFICATION AND ORDERING B 5 - L - SK - RAC2 230/60/3 Series Horsepower Chamber L = Low Body O = Offset
Control Group as specified (Must advise Electrical Characteristics) Mounting Assembly Group BC = Bowl Cone SK = Sink Adaptor
SERIES "B" INSTALLATION DATA AND DIMENSIONS
TYPICAL INSTALLATION MOTOR DATA HP 3 5 7½ 10
PH 3 3 3 3
Voltage
8¼" SINK ADAPTOR ‘SK’
Amps.
208-230/460 10.5/5.25 208-230/460 17.0/8.5 208-230/460 22.0/11.0 208-230/460 26.0/13.0
Continuous Duty-Dual Voltage and Dual Direction-1750 RPM-60 CY Motors. Full service factor-in accordance with NEMA & NEC electrical codes. Bearings permanently lubricated.
¾" FLOW CONTROL EXTRA LENGTH NEOPRENE CONNECTION SLEEVE. MAY BE CUT FOR CORRECT FIT.
CUTOUT 9¼"
22" MIN. OUTLET MAY FACE ANY DIRECTION AS BASE ROTATES 360°
UNION
2" NPT
¾" SOLENOID 9"
10" STD.
TO CENTER
8½" TO CENTER
SHADED SUPPLIED BY OTHERS
DIMENSIONS 8¼" SINK ADAPTOR ‘SK’
18" BOWL / CONE ‘BC’ CUTOUT 19"
CUTOUT 9¼"
7½"
29½" MIN.
22" MIN. 9" 10" STD.
CLEAN-OUT DISPOSER FLANGE
TO CENTER
8½" TO CENTER
SUGGESTED DRAINLINE CONNECTION 2" WASTE LINE
BREAKER CONTROLS AS SPECIFIED
½" FLOW CONTROL
DISPOSER PLUMBING INLET: ¾" cold water supply at 20 lbs. minimum flow pressure. OUTLET: 2" female std. thread pipe coupling. Connect directly to drain, not thru grease trap. DRAIN: Min. slope ¼" per foot. Use recessed thread fitting w/pipe ends reamed/burr-free. Use short horizontal line w/ elbows and tees at minimum, using only long-sweep type. Connected to 3" branch line running into stack. IMPORTANT: Rod and clean drain before using disposer, even in a new installation.
¾" VACUUM
(BUSHED ½")
NOTE: ALL ELECTRICAL AND PLUMBING CONNECTIONS SHOULD BE MADE ACCORDING TO LOCAL AND AREA CODES.
P-TRAP
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
10" STD.
9" 8½"
TO CENTER
TO CENTER
All dimensions are for “L” Low Chamber For “O” Offset Chamber, consult factory.
Master Disposers
MODELS
HEAVY DUTY FOODWASTE DISPOSERS
RAC1 & RAC2 SERIES AUTOMATIC REVERSING MAGNETIC CONTROLS
RAC 1 RAC 2
Voltages*
Model No. Model No. RAC1 Series RAC2 Series
H.P. Range
L
H
PH
√ RAC1-0* √ RAC1-1* √ RAC1-2* RAC1-1.5* RAC1-2.5* RAC1-5* RAC1-7* RAC1-10*
1 2 1&2 1.5 & 2 1.5 3 to 5 7.5 10
115 115 208/230 208/230 115 208/230 208/230 208/230
230 230 460 460 230 460 460 460
1 1 3 3 1 3 3 3
√ RAC2-0* √ RAC2-1* √ RAC2-2* RAC2-1.5* RAC2-2.5* RAC2-5* RAC2-7* RAC2-10*
* - Indicate voltage by addind L or H to the end of model number. √ - used for "D" series only
OPTIONS: ■ PF: Positive flush. ■ RS: Remote Start/Stop switch. ■ EM: The Eco-Mizer™ Electricity and Water Saver. PRODUCT INFORMATION: ■ APPLICATION: Provides automatic reversing of motor (the motor runs in the opposite direction each time it is started) which doubles the life of the shattering mechanism. ■ DESIGN AND CONSTRUCTION: High strength compression molded glass fiber reinforced polyester, NEMA4X (watertight, corrosion resistant) enclosure. Reversing magnetic contactors with built-in automatic reset overload relays to protect against low voltage, overloads and phase failure. Clearly marked terminal strip for easy connection of incoming power, solenoid valve and remote switch.
RAC2
■ DESIGN FEATURES: Encapsulated solid state control circuit board with self-diagnostic circuitry and indicator lights. Front mounted, heavy duty Start and Stop pushbuttons. RAC2 Series features illuminated pushbuttons to indicate mode of operation, built-in clean out cycle (2 minute time delay for flushing of disposer and waste lines) and disconnect switch with heavy duty front mounted “pistol grip” handle with provision for lockout. Antiplug relay to prevent motor reversing while running or coasting. RAC1
■ The Eco-Mizer™ Electricity and Water Saver conserves water and electricity usage by limiting disposer run time to a preset interval. Specify 5 to 15 minutes. ■ WARRANTY: One full year from date of purchase by end user or eighteen months from date of shipment from factory, covering defects in material or workmanship; parts and labor included. Consultant/Contractors Approval
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
MODELS RAC1 & RAC2 AUTOMATIC REVERSING MAGNETIC CONTROLS ■ DIMENSIONS:
■ TYPICAL INSTALLATION:
115⁄16”
71⁄2”
(RAC2 SERIES ONLY)
OPTIONAL REMOTE START/STOP SWITCH (SEE BELOW) 135⁄16”
123⁄4”
HINGE THIS SIDE 63⁄8”
FRONT VIEW
RIGHT SIDE VIEW
5⁄16” DIA. (4) MOUNTING HOLES
COLD WATER SUPPLY 8”
POWER SUPPLY
BOTTOM VIEW
■ SHIPPING DIMENSIONS AND WEIGHTS: MODEL NO. RAC1 RAC2
WIDTH in. mm 12 305 12 305
in. 14 14
DEPTH mm 356 356
in. 11 11
HEIGHT mm 279 279
WEIGHT lbs. kg 25 11 28 13
VOLUME cu. ft. cu. m 1.1 .03 1.1 .03
■ BID SPECIFICATIONS: (Example) Item No.
Control Center
Control Center shall be Master Disposer model RAC2-5L Construction: Shall be NEMA4X watertight, corrosion resistant, molded glass fiber reinforced polyester enclosure. Reversing magnetic contactors with overload relay to protect against low voltage, motor overload and phase failure. Front mounted heavy duty illuminated pushbuttons. Built in front-mounted disconnect switch with heavy duty pistol grip handle with provision for lockout. Encapsulated (moisture resistant) solid state low voltage control circuit with self diagnostic indicator lights. Antiplug relay to prevent motor reversing while running or coasting. Clean out cycle 2 minute time delay. Shall include the Eco-Mizer™ Electricity and Water Saver preset at factory to customer requirements, 5 to 15 minutes, at no additional cost. Approvals and Warranty: Shall be UL (Underwriters Laboratories, Inc.) listed. Warranty shall cover parts, labor and mileage on all components for one year. ■ OPTIONS:
MODEL RS: REMOTE START/STOP SWITCH Allows control panel to be located a distance away while Start/Stop switch can be mounted near disposer. NEMA4X enclosure. Additional Cost
MODEL PF: POSITIVE FLUSH Leaves water running for flushing of waste chamber and drainline for two minutes after motor stops. 5⁄16”
43⁄8”
33⁄8”
23⁄4”
13⁄16”
53⁄4”
FRONT VIEW
41⁄8”
SIDE VIEW
BACK VIEW
Master Disposers is not responsible for any typographical errors. Due to continued product improvement specifications are subject to change without prior notice.
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
HEAVY DUTY FOODWASTE DISPOSERS
SERIES B 10-5/8" ROTOR AVAILABLE IN 3, 5, 7.5, 10 HP
APPLICATION:
Dishwashing areas and all food prep areas of large restaurants and institutional kitchens.
Chamber Mounting Control &
SPECIFICATIONS:
Disposer to be a Master Disposer Model B(HP) - Style Assm. - Voltage 10 5/8" Diameter Rotor/Turntable with exclusive adjustable 45° angle and 6 integral impact breakers constructed of hardened ductile steel alloy for long life use. Matching 45° Sizing Ring with 24 grind teeth constructed of hardened ductile steel alloy. Exclusive 8 ¼" throat opening to allow for faster feeding. Flexible neoprene collar to eliminate vibration and increase ease of installation. Versatile low body or offset grind chambers with force feed directional deflectors. Bolt on grind chamber allows replacement of all wearing parts without disturbing plumbing and electrical connections. Bolt on discharge flange for easy removal. Adjustable legs to level disposer and meet drain stub. Bolt on “Continuous Duty” motor for easy removal. Exclusive shaft extension with ¾" wrench flats to externally de-jam foreign matter without special tools. Heavy cast alloy construction providing an extra long life disposer.
MOUNTING ASSEMBLIES:
"L" LOW CHAMBER (STANDARD)
"SK" 8¼" Sink Adaptor
"O" OFFSET CHAMBER
"BC" 12" or 18" Bowl Cone (All assemblies include; water inlet, vacuum breaker, flow controls, solenoid valve, and silver saver)
ADAPTORS: Available for replacing any make disposer CONTROL GROUP: MC Magnetic Contactor w/ Overload Protection
("MS-1","MS-2", and "RMS-2" NOT AVAILABLE FOR "B" SERIES.)
AUTOMATIC REVERSING CONTROL CENTERS: RAC1 Auto Rev Timed Water Afterun Timed Motor Afterun Auto Off Feature
RAC2 Auto Rev Timed Water Afterun Timed Motor Afterun Auto Off Feature Lighted Push Buttons Line Disconnect Handle
EXAMPLE OF DATA SEQUENCE FOR SPECIFICATION AND ORDERING B 5 - L - SK - RAC2 230/60/3 Series Horsepower Chamber L = Low Body O = Offset
Control Group as specified (Must advise Electrical Characteristics) Mounting Assembly Group BC = Bowl Cone SK = Sink Adaptor
SERIES "B" INSTALLATION DATA AND DIMENSIONS
TYPICAL INSTALLATION MOTOR DATA HP 3 5 7½ 10
PH 3 3 3 3
Voltage
8¼" SINK ADAPTOR ‘SK’
Amps.
208-230/460 10.5/5.25 208-230/460 17.0/8.5 208-230/460 22.0/11.0 208-230/460 26.0/13.0
Continuous Duty-Dual Voltage and Dual Direction-1750 RPM-60 CY Motors. Full service factor-in accordance with NEMA & NEC electrical codes. Bearings permanently lubricated.
¾" FLOW CONTROL EXTRA LENGTH NEOPRENE CONNECTION SLEEVE. MAY BE CUT FOR CORRECT FIT.
CUTOUT 9¼"
22" MIN. OUTLET MAY FACE ANY DIRECTION AS BASE ROTATES 360°
UNION
2" NPT
¾" SOLENOID 9"
10" STD.
TO CENTER
8½" TO CENTER
SHADED SUPPLIED BY OTHERS
DIMENSIONS 8¼" SINK ADAPTOR ‘SK’
18" BOWL / CONE ‘BC’ CUTOUT 19"
CUTOUT 9¼"
7½"
29½" MIN.
22" MIN. 9" 10" STD.
CLEAN-OUT DISPOSER FLANGE
TO CENTER
8½" TO CENTER
SUGGESTED DRAINLINE CONNECTION 2" WASTE LINE
BREAKER CONTROLS AS SPECIFIED
½" FLOW CONTROL
DISPOSER PLUMBING INLET: ¾" cold water supply at 20 lbs. minimum flow pressure. OUTLET: 2" female std. thread pipe coupling. Connect directly to drain, not thru grease trap. DRAIN: Min. slope ¼" per foot. Use recessed thread fitting w/pipe ends reamed/burr-free. Use short horizontal line w/ elbows and tees at minimum, using only long-sweep type. Connected to 3" branch line running into stack. IMPORTANT: Rod and clean drain before using disposer, even in a new installation.
¾" VACUUM
(BUSHED ½")
NOTE: ALL ELECTRICAL AND PLUMBING CONNECTIONS SHOULD BE MADE ACCORDING TO LOCAL AND AREA CODES.
P-TRAP
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
10" STD.
9" 8½"
TO CENTER
TO CENTER
All dimensions are for “L” Low Chamber For “O” Offset Chamber, consult factory.
Master Disposers
MODELS
HEAVY DUTY FOODWASTE DISPOSERS
RAC1 & RAC2 SERIES AUTOMATIC REVERSING MAGNETIC CONTROLS
RAC 1 RAC 2
Voltages*
Model No. Model No. RAC1 Series RAC2 Series
H.P. Range
L
H
PH
√ RAC1-0* √ RAC1-1* √ RAC1-2* RAC1-1.5* RAC1-2.5* RAC1-5* RAC1-7* RAC1-10*
1 2 1&2 1.5 & 2 1.5 3 to 5 7.5 10
115 115 208/230 208/230 115 208/230 208/230 208/230
230 230 460 460 230 460 460 460
1 1 3 3 1 3 3 3
√ RAC2-0* √ RAC2-1* √ RAC2-2* RAC2-1.5* RAC2-2.5* RAC2-5* RAC2-7* RAC2-10*
* - Indicate voltage by addind L or H to the end of model number. √ - used for "D" series only
OPTIONS: ■ PF: Positive flush. ■ RS: Remote Start/Stop switch. ■ EM: The Eco-Mizer™ Electricity and Water Saver. PRODUCT INFORMATION: ■ APPLICATION: Provides automatic reversing of motor (the motor runs in the opposite direction each time it is started) which doubles the life of the shattering mechanism. ■ DESIGN AND CONSTRUCTION: High strength compression molded glass fiber reinforced polyester, NEMA4X (watertight, corrosion resistant) enclosure. Reversing magnetic contactors with built-in automatic reset overload relays to protect against low voltage, overloads and phase failure. Clearly marked terminal strip for easy connection of incoming power, solenoid valve and remote switch.
RAC2
■ DESIGN FEATURES: Encapsulated solid state control circuit board with self-diagnostic circuitry and indicator lights. Front mounted, heavy duty Start and Stop pushbuttons. RAC2 Series features illuminated pushbuttons to indicate mode of operation, built-in clean out cycle (2 minute time delay for flushing of disposer and waste lines) and disconnect switch with heavy duty front mounted “pistol grip” handle with provision for lockout. Antiplug relay to prevent motor reversing while running or coasting. RAC1
■ The Eco-Mizer™ Electricity and Water Saver conserves water and electricity usage by limiting disposer run time to a preset interval. Specify 5 to 15 minutes. ■ WARRANTY: One full year from date of purchase by end user or eighteen months from date of shipment from factory, covering defects in material or workmanship; parts and labor included. Consultant/Contractors Approval
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
MODELS RAC1 & RAC2 AUTOMATIC REVERSING MAGNETIC CONTROLS ■ DIMENSIONS:
■ TYPICAL INSTALLATION:
115⁄16”
71⁄2”
(RAC2 SERIES ONLY)
OPTIONAL REMOTE START/STOP SWITCH (SEE BELOW) 135⁄16”
123⁄4”
HINGE THIS SIDE 63⁄8”
FRONT VIEW
RIGHT SIDE VIEW
5⁄16” DIA. (4) MOUNTING HOLES
COLD WATER SUPPLY 8”
POWER SUPPLY
BOTTOM VIEW
■ SHIPPING DIMENSIONS AND WEIGHTS: MODEL NO. RAC1 RAC2
WIDTH in. mm 12 305 12 305
in. 14 14
DEPTH mm 356 356
in. 11 11
HEIGHT mm 279 279
WEIGHT lbs. kg 25 11 28 13
VOLUME cu. ft. cu. m 1.1 .03 1.1 .03
■ BID SPECIFICATIONS: (Example) Item No.
Control Center
Control Center shall be Master Disposer model RAC2-5L Construction: Shall be NEMA4X watertight, corrosion resistant, molded glass fiber reinforced polyester enclosure. Reversing magnetic contactors with overload relay to protect against low voltage, motor overload and phase failure. Front mounted heavy duty illuminated pushbuttons. Built in front-mounted disconnect switch with heavy duty pistol grip handle with provision for lockout. Encapsulated (moisture resistant) solid state low voltage control circuit with self diagnostic indicator lights. Antiplug relay to prevent motor reversing while running or coasting. Clean out cycle 2 minute time delay. Shall include the Eco-Mizer™ Electricity and Water Saver preset at factory to customer requirements, 5 to 15 minutes, at no additional cost. Approvals and Warranty: Shall be UL (Underwriters Laboratories, Inc.) listed. Warranty shall cover parts, labor and mileage on all components for one year. ■ OPTIONS:
MODEL RS: REMOTE START/STOP SWITCH Allows control panel to be located a distance away while Start/Stop switch can be mounted near disposer. NEMA4X enclosure. Additional Cost
MODEL PF: POSITIVE FLUSH Leaves water running for flushing of waste chamber and drainline for two minutes after motor stops. 5⁄16”
43⁄8”
33⁄8”
23⁄4”
13⁄16”
53⁄4”
FRONT VIEW
41⁄8”
SIDE VIEW
BACK VIEW
Master Disposers is not responsible for any typographical errors. Due to continued product improvement specifications are subject to change without prior notice.
Master Disposers SOMAT COMPANY 165 Independence Court, Lancaster, PA 17601 717-397-5100 — FAX #717-299-4131 800-237-6628 ext. 173 — www.masterdisposers.com
