MID Certificate of Compliance
EC Type Examination Certificate Number: 0120/SGS0204
Shenzhen Chuangren Technology Co Ltd Building 33, No. 3 Industrial Area Mashantou, Gongming Street, New Guangming District, Shenzhen City Guangdong Province, 518106, China Instrument Identification: DSZ12E-3X80A, DSZ12D-3X80A, DSZ12A=3X80A Instrument Traceable Number 0120/ SGS0204 Poly phase, Active Import/Export (kWh), Electricity Meter has been assessed and certified as meeting the requirements of
EC Directive 2014/32/EU on Measuring Instruments Annex II, Module B It is certified that the manufacturer’s technical design and specimen for the above instrument has been examined and, based on the evidence submitted, it is considered that the instrument conforms to the requirements of Annex V of EC Directive 2014/32/EU This certificate must be used in conjunction with a certificate covering the product verification as required in Annex II, Module D or Annex II, Module F th
th
This certificate is valid for 10 years from 29 April 2016 until 28 April 2026 Issue 2 th
Certification is based on report number(s) SHES150800499601 dated 29 April 2016
Authorised Signature Jan Saunders
SGS United Kingdom Limited, Notified Body 0120 Unit 202B Worle Parkway, Weston-super-Mare, BS22 6WA□UK t +44 (0)1934 522917 f +44 (0)1934 522137 www.sgs.com Contact Address SGS United Kingdom Ltd, Units 12A & 12B, South Industrial Estate, Bowburn, Durham, DH6 5AD□UK t +44 (0)191 377 2000 f +44 (0)191 377 2020 www.sgs.com
MID-B06E Rev 8
EC Type Examination Cert. Page 1 of 6
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 1.
Dated: 20th May 2016
Technical Data
Manufacturer Meter Type(s)
Shenzhen Chuangren Technology Co Ltd DSZ12E-3X80A, DSZ12D-3X80A, DSZ12A-3X80A
Voltage Rating (Un)
3 x 230/400V
Current Rating (Imin – Iref (Imax))
DSZ12E: 0.25-5(80)A DSZ12D: 0.5-10(80)A DSZ12A: 0.5-10(80)A
Frequency (Fn)
50Hz
Active Accuracy Class (kWh)
B (kWh)
Type of circuit
3p4w o
o
Temperature Range
-25 C to +55 C
Software/ Firmware Version No
DSZ12D: 723C DSZ12E: 709F DSZ12A: 723C LCD
Identification Location Bill Of Materials Number
IP Rating
DSZ12D V0 DSZ12E V0 DSZ12A V0 The meter casing is only IP50 complaint. Therefore the meter MUST always be fitted into an IP51 approved enclosure.
Insulation Protective Class
Class II
LED Pulse Constant
DSZ12E: 800 imp/kWh DSZ12D LED tariff – 100 imp/kWh DSZ12D S0-output – 1000imp/kWh DSZ12A LED tariff – 100 imp/kWh DSZ12A S0-output – 1000imp/kWh
Impulse Voltage Rating
6kV
AC Voltage Rating
4kV
Main Cover Sealing Type
Terminal covers are wire & crimp Main cover clipped in place and sealed with tamper proof sealing tape
Integrity of meter
Inaccessible without breaking seals
Intended Location of the Meter
Indoor
Type of Register
LCD
Terminal Arrangement(s)
DIN
MID-B-06E Rev 8 EC Type Examination Cert. Page 2 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
2.
Dated: 20th May 2016
Photographs of Meter and Sealing Plan DSZ12D
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 3 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 4 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12E
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 5 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 6 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12A
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 7 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 8 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 3.
Dated: 20th May 2016
Nameplates DSZ12E
MID-B-06E Rev 8 EC Type Examination Cert. Page 9 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12D
MID-B-06E Rev 8 EC Type Examination Cert. Page 10 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12A
MID-B-06E Rev 8 EC Type Examination Cert. Page 11 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Dated: 20th May 2016
Issue Number: 2 4.
Calculation of the composite error/ MPE
Current Imin Itr 10Itr Imax Itr 10Itr Imax Itr 10Itr Imax
Influence Factors for temperature, frequency and voltage PF Cos -25°C -10°C 5°C 30°C 40°C 1.0 0.30 0.29 0.32 0.37 0.64 1.0 0.42 0.61 0.69 0.26 0.28 1.0 0.35 0.22 0.24 0.21 0.61 1.0 0.16 0.14 0.15 0.15 0.16 0.5ind 0.32 0.48 0.59 0.63 0.65 0.5ind 0.43 0.49 0.51 0.57 0.57 0.5ind 0.95 0.99 0.69 0.74 0.68 0.8cap 0.38 0.41 0.30 0.30 0.68 0.8cap 0.57 0.59 0.43 0.54 0.41 0.8cap 0.65 0.56 0.72 0.75 0.52
55°C 0.45 0.33 0.54 0.22 0.71 0.48 0.94 0.37 0.42 0.64
L1 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.42 0.62 0.58 0.52 0.51 0.57
0.38 0.65 0.73 0.37 0.62 1.06
0.30 0.66 0.72 0.26 0.53 1.06
0.18 0.46 0.63 0.09 0.39 0.86
0.14 0.52 0.68 0.06 0.38 0.98
0.07 0.31 0.54 0.15 0.11 0.81
L2 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.27 0.21 0.27 030 0.27 0.21
0.22 0.16 0.24 0.24 0.20 0.18
0.15 0.09 0.19 0.14 0.12 0.15
0.04 0.07 0.14 0.02 0.02 0.09
0.03 0.09 0.12 0.07 0.05 0.08
0.09 0.12 0.09 0.17 0.15 0.10
L3 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.21 0.20 0.28 0.28 0.25 0.20
0.16 0.16 0.26 0.18 0.20 0.27
0.09 0.12 0.24 0.12 0.13 0.16
0.03 0.06 0.20 0.02 0.02 0.03
0.07 0.08 0.19 0.07 0.05 0.11
0.12 0.12 0.18 0.16 0.12 0.14
MID-B-06E Rev 8 EC Type Examination Cert. Page 12 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
During the type approval examination the influence factors for temperature, frequency and voltage are determined per load point. The table above represents the sum of the square values per load, determined via the following formula:e (T, U, f) = √ ( e2 (T, I ,cos) , e2 (U, I ,cos) , e2 ( f , I ,cos)) where e(T, I ,cos) = e(U, I ,cos) = e( f , I ,cos) =
Additional error due to variation of the temperature at the same load Additional error due to variation of the voltage at the same load Additional error due to variation of the frequency at the same load
MID-B-06E Rev 8 EC Type Examination Cert. Page 13 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 5.
Dated: 20th May 2016
Annex of Variants
Product Variant Identification Details: Type Designation
Description of meter
DSZ12E
3 x 230/400V 0.25-5(80)A 800 imp/kWh
DSZ12D
3 x 230/400V 0.5-10(80)A LED tariff - 100 imp/kWh S0-output – 1000imp/kWh
DSZ12A
3 x 230/400V 0.5-10(80)A LED tariff - 100 imp/kWh S0-output – 1000imp/kWh
Modifications to the meter(s) described according to approval No.0120/ SGS0204 must be notified to the issuing body to confirm the meter(s) continuing compliance to the relevant pattern approval standard(s).
MID-B-06E Rev 8 EC Type Examination Cert. Page 14 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 6.
Dated: 20th May 2016
Document Revision History
Issue 1 2
Date
Comments
29/04/2016 20/05/2016
Initial Issue Model DSZ12A added to approval
MID-B-06E Rev 8 EC Type Examination Cert. Page 15 of 15
Shenzhen Chuangren Technology Co Ltd Building 33, No. 3 Industrial Area Mashantou, Gongming Street, New Guangming District, Shenzhen City Guangdong Province, 518106, China Instrument Identification: DSZ12E-3X80A, DSZ12D-3X80A, DSZ12A=3X80A Instrument Traceable Number 0120/ SGS0204 Poly phase, Active Import/Export (kWh), Electricity Meter has been assessed and certified as meeting the requirements of
EC Directive 2014/32/EU on Measuring Instruments Annex II, Module B It is certified that the manufacturer’s technical design and specimen for the above instrument has been examined and, based on the evidence submitted, it is considered that the instrument conforms to the requirements of Annex V of EC Directive 2014/32/EU This certificate must be used in conjunction with a certificate covering the product verification as required in Annex II, Module D or Annex II, Module F th
th
This certificate is valid for 10 years from 29 April 2016 until 28 April 2026 Issue 2 th
Certification is based on report number(s) SHES150800499601 dated 29 April 2016
Authorised Signature Jan Saunders
SGS United Kingdom Limited, Notified Body 0120 Unit 202B Worle Parkway, Weston-super-Mare, BS22 6WA□UK t +44 (0)1934 522917 f +44 (0)1934 522137 www.sgs.com Contact Address SGS United Kingdom Ltd, Units 12A & 12B, South Industrial Estate, Bowburn, Durham, DH6 5AD□UK t +44 (0)191 377 2000 f +44 (0)191 377 2020 www.sgs.com
MID-B06E Rev 8
EC Type Examination Cert. Page 1 of 6
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 1.
Dated: 20th May 2016
Technical Data
Manufacturer Meter Type(s)
Shenzhen Chuangren Technology Co Ltd DSZ12E-3X80A, DSZ12D-3X80A, DSZ12A-3X80A
Voltage Rating (Un)
3 x 230/400V
Current Rating (Imin – Iref (Imax))
DSZ12E: 0.25-5(80)A DSZ12D: 0.5-10(80)A DSZ12A: 0.5-10(80)A
Frequency (Fn)
50Hz
Active Accuracy Class (kWh)
B (kWh)
Type of circuit
3p4w o
o
Temperature Range
-25 C to +55 C
Software/ Firmware Version No
DSZ12D: 723C DSZ12E: 709F DSZ12A: 723C LCD
Identification Location Bill Of Materials Number
IP Rating
DSZ12D V0 DSZ12E V0 DSZ12A V0 The meter casing is only IP50 complaint. Therefore the meter MUST always be fitted into an IP51 approved enclosure.
Insulation Protective Class
Class II
LED Pulse Constant
DSZ12E: 800 imp/kWh DSZ12D LED tariff – 100 imp/kWh DSZ12D S0-output – 1000imp/kWh DSZ12A LED tariff – 100 imp/kWh DSZ12A S0-output – 1000imp/kWh
Impulse Voltage Rating
6kV
AC Voltage Rating
4kV
Main Cover Sealing Type
Terminal covers are wire & crimp Main cover clipped in place and sealed with tamper proof sealing tape
Integrity of meter
Inaccessible without breaking seals
Intended Location of the Meter
Indoor
Type of Register
LCD
Terminal Arrangement(s)
DIN
MID-B-06E Rev 8 EC Type Examination Cert. Page 2 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
2.
Dated: 20th May 2016
Photographs of Meter and Sealing Plan DSZ12D
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 3 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 4 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12E
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 5 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 6 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12A
Main cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 7 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
Terminal cover sealing points
MID-B-06E Rev 8 EC Type Examination Cert. Page 8 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 3.
Dated: 20th May 2016
Nameplates DSZ12E
MID-B-06E Rev 8 EC Type Examination Cert. Page 9 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12D
MID-B-06E Rev 8 EC Type Examination Cert. Page 10 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
DSZ12A
MID-B-06E Rev 8 EC Type Examination Cert. Page 11 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Dated: 20th May 2016
Issue Number: 2 4.
Calculation of the composite error/ MPE
Current Imin Itr 10Itr Imax Itr 10Itr Imax Itr 10Itr Imax
Influence Factors for temperature, frequency and voltage PF Cos -25°C -10°C 5°C 30°C 40°C 1.0 0.30 0.29 0.32 0.37 0.64 1.0 0.42 0.61 0.69 0.26 0.28 1.0 0.35 0.22 0.24 0.21 0.61 1.0 0.16 0.14 0.15 0.15 0.16 0.5ind 0.32 0.48 0.59 0.63 0.65 0.5ind 0.43 0.49 0.51 0.57 0.57 0.5ind 0.95 0.99 0.69 0.74 0.68 0.8cap 0.38 0.41 0.30 0.30 0.68 0.8cap 0.57 0.59 0.43 0.54 0.41 0.8cap 0.65 0.56 0.72 0.75 0.52
55°C 0.45 0.33 0.54 0.22 0.71 0.48 0.94 0.37 0.42 0.64
L1 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.42 0.62 0.58 0.52 0.51 0.57
0.38 0.65 0.73 0.37 0.62 1.06
0.30 0.66 0.72 0.26 0.53 1.06
0.18 0.46 0.63 0.09 0.39 0.86
0.14 0.52 0.68 0.06 0.38 0.98
0.07 0.31 0.54 0.15 0.11 0.81
L2 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.27 0.21 0.27 030 0.27 0.21
0.22 0.16 0.24 0.24 0.20 0.18
0.15 0.09 0.19 0.14 0.12 0.15
0.04 0.07 0.14 0.02 0.02 0.09
0.03 0.09 0.12 0.07 0.05 0.08
0.09 0.12 0.09 0.17 0.15 0.10
L3 Itr 10Itr Imax Itr 10Itr Imax
1.0 1.0 1.0 0.5ind 0.5ind 0.5ind
0.21 0.20 0.28 0.28 0.25 0.20
0.16 0.16 0.26 0.18 0.20 0.27
0.09 0.12 0.24 0.12 0.13 0.16
0.03 0.06 0.20 0.02 0.02 0.03
0.07 0.08 0.19 0.07 0.05 0.11
0.12 0.12 0.18 0.16 0.12 0.14
MID-B-06E Rev 8 EC Type Examination Cert. Page 12 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2
Dated: 20th May 2016
During the type approval examination the influence factors for temperature, frequency and voltage are determined per load point. The table above represents the sum of the square values per load, determined via the following formula:e (T, U, f) = √ ( e2 (T, I ,cos) , e2 (U, I ,cos) , e2 ( f , I ,cos)) where e(T, I ,cos) = e(U, I ,cos) = e( f , I ,cos) =
Additional error due to variation of the temperature at the same load Additional error due to variation of the voltage at the same load Additional error due to variation of the frequency at the same load
MID-B-06E Rev 8 EC Type Examination Cert. Page 13 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 5.
Dated: 20th May 2016
Annex of Variants
Product Variant Identification Details: Type Designation
Description of meter
DSZ12E
3 x 230/400V 0.25-5(80)A 800 imp/kWh
DSZ12D
3 x 230/400V 0.5-10(80)A LED tariff - 100 imp/kWh S0-output – 1000imp/kWh
DSZ12A
3 x 230/400V 0.5-10(80)A LED tariff - 100 imp/kWh S0-output – 1000imp/kWh
Modifications to the meter(s) described according to approval No.0120/ SGS0204 must be notified to the issuing body to confirm the meter(s) continuing compliance to the relevant pattern approval standard(s).
MID-B-06E Rev 8 EC Type Examination Cert. Page 14 of 15
EC-Type Examination Certificate Number:
0120/ SGS0204 Issue Number: 2 6.
Dated: 20th May 2016
Document Revision History
Issue 1 2
Date
Comments
29/04/2016 20/05/2016
Initial Issue Model DSZ12A added to approval
MID-B-06E Rev 8 EC Type Examination Cert. Page 15 of 15
