MiniWoody â Woody
MiniWoody – Woody design: Mario Cucinella
MiniWoody Page 37 (Above display application)
The MiniWoody and Woody are available with two different types of optics: flood and spot. These lights offer a range of accessories which enable an ideal installation in a variety of locations.
Woody discharge Page 41 (Wall application)
MiniWoody Page 36 (Surface application)
Woody Page 38 (Surface application)
33
MiniWoody – Woody design: Mario Cucinella
MiniWoody and Woody floodlight components are made of die-cast aluminum and supplied with a 99.85% super-pure aluminum reflectors. The optical assembly is closed at the front with a die-cast ring with tempered safety glass lens and silicon gasket to ensure a dust and weather-tight seal. The fixtures are equipped with a locking device to allow adjustment in both the vertical and horizontal axis. This adjustment can be locked in place. Two optical systems are available: spot and flood. The low voltage fixtures are supplied with an integral transformer, available in 120V or 277V. All hardware is stainless steel for superior corrosion resistance. The technical characteristics of fixtures comply with to EN60598-1 standard. This fixture is rated IP66. UL Listed “Suitable for wet location”
With the MiniWoody and Woody, it is possible to create the most suitable distribution of light for the shape and dimensions of the feature to be illuminated.
Flood (F)
Spot (S)
Linear Spread
The flood beam allows a uniform distribution of light over large surfaces.
This type of beam enables details and small features to be illuminated.
The linear spread lens used with the spot beam creates an elliptical distribution of light. This is ideal for illuminating features which are thin but tall or wide.
34
MiniWoody – Woody design: Mario Cucinella
The MiniWoody and Woody projectors are equipped with an adjustable lampholder to adjust the beam without opening the fixture and while the fixture is operating. This feature is only available on fixtures with the T4 GY 6.35 lamps.
MiniWoody flood – F
MiniWoody spot – S
The Woody low voltage version has a beam ajustment device for spot of 4°-10° and for flood of 14°-15°.
35
MiniWoody design: Mario Cucinella
Newtown restaurant, Montreal, Francois Roupinian, Lighting Designer lamp
T4 GY 6.35 T4 GY 6.35
S S
Narrowest distribution of light setting
Complete with integral electronic transformer
4"
(6˚)
5"
Widest distribution of light setting (24˚)
MiniWoody flood with base I.B585-120 50W 12V T4 I.B585-277 50W 12V T4
GY 6.35 GY 6.35
Complete with integral electronic transformer
F F
Narrowest distribution of light setting (24˚)
Widest distribution of light setting (56˚)
Photometric files are available at: www.iguzzini-na.com/downloads
36
ø 3-3/8"
MiniWoody spot with base I.B584-120 50W 12V I.B584-277 50W 12V
8-1/8"
code
MiniWoody design: Mario Cucinella
15 code
lamp
T4 T4
GY 6.35 GY 6.35
F F
34-1/2"
4"
5"
Miniwoody flood with arm I.B593-120 50W 12V I.B593-277 50W 12V
Complete with integral ele ctronic transformer ø 3-3/8"
Flange plate with bolts I.1184
accessories code
Linear spread lens for elliptical distribution I.1181
for I.B584 Available in color 24 Visor
I.1182
for I.B584, I.B585, I.B593
Available in color 15 Strap for landscape application Section = 1-5/8” x 4-3/4” I.1183
for I.B584, I.B585
Stainless steel plate with spike for landscape application I.B988
for I.B584, I.B585
Photometric files are available at: www.iguzzini-na.com/downloads
37
Woody design: Mario Cucinella
15 lamp
T4 T4
Narrowest distribution of light setting
GY 6.35 S GY 6.35 S
6-1/2" ø 5-1/2"
Woody spot with base I.7334-120 50W 12V I.7334-277 50W 12V
9"
code
Complete with integral electronic transformer
ø 4" (4˚)
Woody flood with base I.7335-120 50W 12V I.7335-277 50W 12V
T4 T4
Widest distribution of light setting
GY 6.35 F GY 6.35 F
Complete with integral electronic transformer (14˚)
Woody spot with base I.7338 100W 120V
Halogen Hal Q/DC S
(14˚)
Woody flood with base I.7339 100W 120V
Halogen Hal Q/DC F
(43˚)
Complete with integral electronic transformer
ø 5-1/2"
Woody with stake I.7353-120 50W I.7353-277 50W I.7354-120 50W I.7354-277 50W
T4 T4 T4 T4
12V 12V 12V 12V
GY 6.35 GY 6.35 GY 6.35 GY 6.35
S S F F
Complete with integral electronic transformer Woody with stake 100W 100W
I.7357 I.7358
120V 120V
Halogen Hal Q/DC S Halogen Hal Q/DC F
Complete with supply cable L = 9 ft.
Photometric files are available at: www.iguzzini-na.com/downloads
38
6-1/2" ø 5-1/2"
Halogen Hal Q/DC F
13-3/8"
Woody flood with arm 100W 120V
I.7352
37-3/8" 6-1/2"
GY 6.35 F GY 6.35 F
10-5/8"
T4 T4
4-3/4"
Woody flood with arm 50W 12V 50W 12V
I.7350-120 I.7350-277
Woody design: Mario Cucinella
15
accessories code
Linear spread lens for elliptical distribution I.1185
for I.7334, I.7353 Available in color 24 Visor
I.1186
for I.7334, I.7335, I.7338, I.7339, I.7348, I.7352, I.7353, I.7354, I.7357, I.7358, I.7362 Available in color 15 Inside corner base (90° angle) I.1189
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Outside corner base (90° corner) I.1188
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Pipe clamp mount Diameter = 1-5/8” x 3-1/8” I.1190
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Strap for landscape application Section = 1-5/8” x 4-3/4” I.1187
for I.7334, I.7335, I.7338, I.7339
Photometric files are available at: www.iguzzini-na.com/downloads
39
Woody discharge design: Mario Cucinella
Floodlights are made of die-cast aluminum and supplied with a 99.85% superpure aluminum reflector. The box is made of extruded aluminum with cast aluminum plugs. The compartment is closed at the front by a die-cast ring with a protective glass cover and silicone gasket to ensure a dust and watertight seal. The fixtures have joints for horizontal and vertical adjustment with the possibility of locking the position. There are two different kinds of optic: flood and spot.
This serie is supplied with integral electronic ballast of 120V and 277V. Screws and bolts are made of stainless steel. The technical characteristics of the fixture comply with EN 60598-1 standard. This fixture is rated IP66. UL Listed “Suitable for wet location”
The pole mounting, with the single or twin floodlight, and the wall mount solutions highlight the system’s versatility and its modern and functional design features.
With Woody serie optics, it is possible to create the most suitable distribution of light for the shape and dimensions of the features to be illuminated.
Flood
Spot
Shaft of light (possible with linear spread lens)
1 Mounting on a low wall 2 Mounting on a pole 3 Twin mounting on a pole 4 Wall mounting
40
Woody discharge design: Mario Cucinella
15 lamp
G12 G12
S S
I.7593-120 I.7593-277
G12 G12
S S
70W 70W
T6 T6
6-1/2" ø 5-1/2"
Woody discharge spot I.7591-120 35W T6 I.7591-277 35W T6
8-3/4"
code
(16˚)
ø 4-1/4"
Complete with integral electronic ballast Woody discharge flood 35W T6 35W T6
G12 G12
F F
I.7594-120 I.7594-277
G12 G12
F F
I.7592-120 I.7592-277
70W 70W
T6 T6
(38˚)
Complete with integral electronic ballast
accessories code
Linear spread lens for elliptical distribution
I.1185
for I.7591, I.7593 Available in color 24
(51˚/19˚)
Visor
Support for wall application
for I.7591, I.7592, I.7593, I.7594
for I.7591, I.7592, I.7593, I.7594
I.1186
I.5928
Available in color 15
Available in color 15
Fastening plate for ground application I.5927
for I.7591, I.7592, I.7593, I.7594
Support for double application on pole I.5930 pole ø 3-1/8” to 4-3/4” for I.7591, I.7592, I.7593, I.7594
Available in color 15
Available in color 15
Support for pole application I.5929 pole ø 3-1/8” to 4-3/4” for I.7591, I.7592, I.7593, I.7594 Available in color 15
Photometric files are available at: www.iguzzini-na.com/downloads
41
MiniWoody Page 37 (Above display application)
The MiniWoody and Woody are available with two different types of optics: flood and spot. These lights offer a range of accessories which enable an ideal installation in a variety of locations.
Woody discharge Page 41 (Wall application)
MiniWoody Page 36 (Surface application)
Woody Page 38 (Surface application)
33
MiniWoody – Woody design: Mario Cucinella
MiniWoody and Woody floodlight components are made of die-cast aluminum and supplied with a 99.85% super-pure aluminum reflectors. The optical assembly is closed at the front with a die-cast ring with tempered safety glass lens and silicon gasket to ensure a dust and weather-tight seal. The fixtures are equipped with a locking device to allow adjustment in both the vertical and horizontal axis. This adjustment can be locked in place. Two optical systems are available: spot and flood. The low voltage fixtures are supplied with an integral transformer, available in 120V or 277V. All hardware is stainless steel for superior corrosion resistance. The technical characteristics of fixtures comply with to EN60598-1 standard. This fixture is rated IP66. UL Listed “Suitable for wet location”
With the MiniWoody and Woody, it is possible to create the most suitable distribution of light for the shape and dimensions of the feature to be illuminated.
Flood (F)
Spot (S)
Linear Spread
The flood beam allows a uniform distribution of light over large surfaces.
This type of beam enables details and small features to be illuminated.
The linear spread lens used with the spot beam creates an elliptical distribution of light. This is ideal for illuminating features which are thin but tall or wide.
34
MiniWoody – Woody design: Mario Cucinella
The MiniWoody and Woody projectors are equipped with an adjustable lampholder to adjust the beam without opening the fixture and while the fixture is operating. This feature is only available on fixtures with the T4 GY 6.35 lamps.
MiniWoody flood – F
MiniWoody spot – S
The Woody low voltage version has a beam ajustment device for spot of 4°-10° and for flood of 14°-15°.
35
MiniWoody design: Mario Cucinella
Newtown restaurant, Montreal, Francois Roupinian, Lighting Designer lamp
T4 GY 6.35 T4 GY 6.35
S S
Narrowest distribution of light setting
Complete with integral electronic transformer
4"
(6˚)
5"
Widest distribution of light setting (24˚)
MiniWoody flood with base I.B585-120 50W 12V T4 I.B585-277 50W 12V T4
GY 6.35 GY 6.35
Complete with integral electronic transformer
F F
Narrowest distribution of light setting (24˚)
Widest distribution of light setting (56˚)
Photometric files are available at: www.iguzzini-na.com/downloads
36
ø 3-3/8"
MiniWoody spot with base I.B584-120 50W 12V I.B584-277 50W 12V
8-1/8"
code
MiniWoody design: Mario Cucinella
15 code
lamp
T4 T4
GY 6.35 GY 6.35
F F
34-1/2"
4"
5"
Miniwoody flood with arm I.B593-120 50W 12V I.B593-277 50W 12V
Complete with integral ele ctronic transformer ø 3-3/8"
Flange plate with bolts I.1184
accessories code
Linear spread lens for elliptical distribution I.1181
for I.B584 Available in color 24 Visor
I.1182
for I.B584, I.B585, I.B593
Available in color 15 Strap for landscape application Section = 1-5/8” x 4-3/4” I.1183
for I.B584, I.B585
Stainless steel plate with spike for landscape application I.B988
for I.B584, I.B585
Photometric files are available at: www.iguzzini-na.com/downloads
37
Woody design: Mario Cucinella
15 lamp
T4 T4
Narrowest distribution of light setting
GY 6.35 S GY 6.35 S
6-1/2" ø 5-1/2"
Woody spot with base I.7334-120 50W 12V I.7334-277 50W 12V
9"
code
Complete with integral electronic transformer
ø 4" (4˚)
Woody flood with base I.7335-120 50W 12V I.7335-277 50W 12V
T4 T4
Widest distribution of light setting
GY 6.35 F GY 6.35 F
Complete with integral electronic transformer (14˚)
Woody spot with base I.7338 100W 120V
Halogen Hal Q/DC S
(14˚)
Woody flood with base I.7339 100W 120V
Halogen Hal Q/DC F
(43˚)
Complete with integral electronic transformer
ø 5-1/2"
Woody with stake I.7353-120 50W I.7353-277 50W I.7354-120 50W I.7354-277 50W
T4 T4 T4 T4
12V 12V 12V 12V
GY 6.35 GY 6.35 GY 6.35 GY 6.35
S S F F
Complete with integral electronic transformer Woody with stake 100W 100W
I.7357 I.7358
120V 120V
Halogen Hal Q/DC S Halogen Hal Q/DC F
Complete with supply cable L = 9 ft.
Photometric files are available at: www.iguzzini-na.com/downloads
38
6-1/2" ø 5-1/2"
Halogen Hal Q/DC F
13-3/8"
Woody flood with arm 100W 120V
I.7352
37-3/8" 6-1/2"
GY 6.35 F GY 6.35 F
10-5/8"
T4 T4
4-3/4"
Woody flood with arm 50W 12V 50W 12V
I.7350-120 I.7350-277
Woody design: Mario Cucinella
15
accessories code
Linear spread lens for elliptical distribution I.1185
for I.7334, I.7353 Available in color 24 Visor
I.1186
for I.7334, I.7335, I.7338, I.7339, I.7348, I.7352, I.7353, I.7354, I.7357, I.7358, I.7362 Available in color 15 Inside corner base (90° angle) I.1189
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Outside corner base (90° corner) I.1188
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Pipe clamp mount Diameter = 1-5/8” x 3-1/8” I.1190
for I.7334, I.7335, I.7338, I.7339 Available in color 15 Strap for landscape application Section = 1-5/8” x 4-3/4” I.1187
for I.7334, I.7335, I.7338, I.7339
Photometric files are available at: www.iguzzini-na.com/downloads
39
Woody discharge design: Mario Cucinella
Floodlights are made of die-cast aluminum and supplied with a 99.85% superpure aluminum reflector. The box is made of extruded aluminum with cast aluminum plugs. The compartment is closed at the front by a die-cast ring with a protective glass cover and silicone gasket to ensure a dust and watertight seal. The fixtures have joints for horizontal and vertical adjustment with the possibility of locking the position. There are two different kinds of optic: flood and spot.
This serie is supplied with integral electronic ballast of 120V and 277V. Screws and bolts are made of stainless steel. The technical characteristics of the fixture comply with EN 60598-1 standard. This fixture is rated IP66. UL Listed “Suitable for wet location”
The pole mounting, with the single or twin floodlight, and the wall mount solutions highlight the system’s versatility and its modern and functional design features.
With Woody serie optics, it is possible to create the most suitable distribution of light for the shape and dimensions of the features to be illuminated.
Flood
Spot
Shaft of light (possible with linear spread lens)
1 Mounting on a low wall 2 Mounting on a pole 3 Twin mounting on a pole 4 Wall mounting
40
Woody discharge design: Mario Cucinella
15 lamp
G12 G12
S S
I.7593-120 I.7593-277
G12 G12
S S
70W 70W
T6 T6
6-1/2" ø 5-1/2"
Woody discharge spot I.7591-120 35W T6 I.7591-277 35W T6
8-3/4"
code
(16˚)
ø 4-1/4"
Complete with integral electronic ballast Woody discharge flood 35W T6 35W T6
G12 G12
F F
I.7594-120 I.7594-277
G12 G12
F F
I.7592-120 I.7592-277
70W 70W
T6 T6
(38˚)
Complete with integral electronic ballast
accessories code
Linear spread lens for elliptical distribution
I.1185
for I.7591, I.7593 Available in color 24
(51˚/19˚)
Visor
Support for wall application
for I.7591, I.7592, I.7593, I.7594
for I.7591, I.7592, I.7593, I.7594
I.1186
I.5928
Available in color 15
Available in color 15
Fastening plate for ground application I.5927
for I.7591, I.7592, I.7593, I.7594
Support for double application on pole I.5930 pole ø 3-1/8” to 4-3/4” for I.7591, I.7592, I.7593, I.7594
Available in color 15
Available in color 15
Support for pole application I.5929 pole ø 3-1/8” to 4-3/4” for I.7591, I.7592, I.7593, I.7594 Available in color 15
Photometric files are available at: www.iguzzini-na.com/downloads
41
