mir6b - Mircom
MAGNETIC DOOR LOCKS
MIR6S / MIR6B Features • 600 pounds minimum holding force • Compatible with all access/egress systems • A luminium/stainless casings are weather and vandal resistant • O n board mov’s provide protection against voltage spikes and surges • A ssorted mounting brackets and filler plates available
Description The MIR6B model contains a bond sensor to indicate that the door is secure, an internal timer that eliminates the need for add-on exit delays timers and a door status switch, relay and LED. Power Selector Jumpers:
Printed Circuit Board Schematic (shown with all options)
A. 12V DC Input: Power Selector jumper for 12V DC operation. Connect the ground (-) lead from a 12V DC power source to terminal 2. Connect the positive (+) lead from a 12V DC power source to terminal 1.
3
4
5
C
2 -
N/C
1 +
IC 1
B. 24V DC Input: Power Selector jumper for 24V DC operation. Unit is delivered from Factory with single jumper ON for 24V operation. Connect the ground (-) lead from a 24V DC power source to terminal 2. Connect the positive (+) lead from a 24V DC power source to terminal.
N/O
Door Status Switch
Power Selector Jumpers 12V DC 24V DC
RELAY 1
LED Bond Sensor
Magnet
Magnetic Lock wiring Instructions Internal Timer
Power Supply Wiring Requirements In context with the Power switch or solid state switching device installation to minimize the effect of residual magnetism install switch at location indicated in the schematic diagram “CORRECT”.
Switch or Solid State Switching Device
Switch or Solid State Switching Device 110 V AC
110 V AC
12 or 24 VDC
12 or 24 VDC
CORRECT
INCORRECT
CATALOG NUMBER NOT TO BE USED FOR INSTALLATION PURPOSES.
7907
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Typical Installation
Typical Installation Electromagnetic Lock Mounts to Door Frame
Armature plate mounts to Door
Ordering Information Model MIR6S MIR6B
Description 600 lbs Surface Mount Single Door 600 lbs Surface Mount Single Door with Sensor
Features Basic Comes with Adjustable timer, Lock Sensor, Door Status Switch, Relay & LED
Current Draw
Dimensions
500mA @ 12 V 250mA @ 24 V
9 7/8" x 1 7/8" x 1" 251mm x 48mm x 25mm
NOT TO BE USED FOR INSTALLATION PURPOSES.
Distributed by:
Canada 25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone: (905) 660-4655 Fax: (905) 660-4113
U.S.A. 4575 Witmer Industrial Estates Niagara Falls, NY 14305 Toll Free: (888) 660-4655 Fax Toll Free: (888) 660-4113
Web page: http://www.mircomgroup.com
Email: [email protected]
CAT. 7907
Rev. 1
MIR6S / MIR6B Features • 600 pounds minimum holding force • Compatible with all access/egress systems • A luminium/stainless casings are weather and vandal resistant • O n board mov’s provide protection against voltage spikes and surges • A ssorted mounting brackets and filler plates available
Description The MIR6B model contains a bond sensor to indicate that the door is secure, an internal timer that eliminates the need for add-on exit delays timers and a door status switch, relay and LED. Power Selector Jumpers:
Printed Circuit Board Schematic (shown with all options)
A. 12V DC Input: Power Selector jumper for 12V DC operation. Connect the ground (-) lead from a 12V DC power source to terminal 2. Connect the positive (+) lead from a 12V DC power source to terminal 1.
3
4
5
C
2 -
N/C
1 +
IC 1
B. 24V DC Input: Power Selector jumper for 24V DC operation. Unit is delivered from Factory with single jumper ON for 24V operation. Connect the ground (-) lead from a 24V DC power source to terminal 2. Connect the positive (+) lead from a 24V DC power source to terminal.
N/O
Door Status Switch
Power Selector Jumpers 12V DC 24V DC
RELAY 1
LED Bond Sensor
Magnet
Magnetic Lock wiring Instructions Internal Timer
Power Supply Wiring Requirements In context with the Power switch or solid state switching device installation to minimize the effect of residual magnetism install switch at location indicated in the schematic diagram “CORRECT”.
Switch or Solid State Switching Device
Switch or Solid State Switching Device 110 V AC
110 V AC
12 or 24 VDC
12 or 24 VDC
CORRECT
INCORRECT
CATALOG NUMBER NOT TO BE USED FOR INSTALLATION PURPOSES.
7907
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Typical Installation
Typical Installation Electromagnetic Lock Mounts to Door Frame
Armature plate mounts to Door
Ordering Information Model MIR6S MIR6B
Description 600 lbs Surface Mount Single Door 600 lbs Surface Mount Single Door with Sensor
Features Basic Comes with Adjustable timer, Lock Sensor, Door Status Switch, Relay & LED
Current Draw
Dimensions
500mA @ 12 V 250mA @ 24 V
9 7/8" x 1 7/8" x 1" 251mm x 48mm x 25mm
NOT TO BE USED FOR INSTALLATION PURPOSES.
Distributed by:
Canada 25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone: (905) 660-4655 Fax: (905) 660-4113
U.S.A. 4575 Witmer Industrial Estates Niagara Falls, NY 14305 Toll Free: (888) 660-4655 Fax Toll Free: (888) 660-4113
Web page: http://www.mircomgroup.com
Email: [email protected]
CAT. 7907
Rev. 1
