model 8760 - Haws
model
8760
Emergency Tempered Water Shower and Eye/Face Wash
FEATURES & BENEFITS QUALITY CONTROL Fully assembled and Engineer tested product that is ready for placement and hook-up. ALARM SYSTEM Standard with audible and visible alarms controlled by a flow switch for immediate attention to an emergency. BLENDING SYSTEM Safe, fully engineered thermostatic mixing valve for mixing large volumes of hot and cold water guarded with anti-scald protection and full flow cold water bypass to provide tempered water in adverse situations. TANK SYSTEM OPTIONS 119 Gallon (450 L) Tank (Option No. 21): Stores enough hot water to provide a single 15 minute, 20 gpm (75.7 L) shower. Recovery time of up to 6 hours (Also available in ASME - Option 22). 325 Gallon (1230 L) Tank (Option No. 23): stores enough hot water to provide two 15 minute, 20 gpm (75.7 L) showers before tank recovery is required. Recovery time of up to 18 hours. STEAM SYSTEMS Steam Heat Exchanger (Option No. 24): Feed forward instantaneous heat exchanger. Requires 15 PSIG, max. 1300 lb./hr. steam supply. SKID CONSTRUCTION Membrane encapsulated, fiberglass channel reinforced wooden structure with bright yellow elastomeric chemically resistant waterproof coating which is protected for long life with UV inhibitors. EYE/FACE WASH AXION MSR™ eye/face wash head (patent pending) uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity. EXPANDABLE/FLEXIBLE CAPABILITIES System can be designed to a number of variations including the hot water supply, the electrical type, and the blending capabilities. ELECTRICAL SYSTEM OPTIONS Haws’ standard system requires 208/240 VAC single phase, 3 wire 40 amp (min.), electrical supply. NEMA 4 tank (Option 31), steam (Option 36). NEMA 7 Class I, DIV2, Group B, C, D tank (Option 32), steam (Option 38) (Class l, DIV l also available)
OPTIONS To see all options for this model, visit www.hawsco.com
SPECIFICATIONS Model 8760 shower and eye/face wash shall include a membrane encapsulated, steel-reinforced 4' x 6' (1.2 x 1.82 m) wood skid with bright yellow elastomeric chemically resistant waterproof coating, protected with UV inhibitors. There ia a 20 gpm (75.7 L) shower, an eyewash that features the medically acclaimed AXION MSR™ eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity, along with 3 gpm (11.4 L) to supply the side hanging drench hose. Chrome-plated brass stay-open shower, eyewash, and drench hose ball valves equipped with stainless steel ball and stem, and protected by scald and freeze bleed valves. The standard alarm system is flow switch activated, and provides local audible and visible alarms. This single shower and/or eyewash or multiple shower/eyewash feeder is designed to operate with a number of tempering and electrical options. The tempered blending system will include an integral hot water supply, whether stored or supplied by steam, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system requires 208/240 VAC single phase, 3 wire 40 amp minimum.Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for /emergency Eyewash and Shower Equipment.
APPLICATIONS Perfect for indoor facilities that may encounter dangerous chemical hazards and need a complete decontamination station, and/or need a feeder to other remote booth substations, or other drench systems and/or eyewash stations.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 01 July, 2014 DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
7
8
6
5
1
2
3
4
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF HAWS CORPORATION.
97 1/4" 2472.54
F
F
72" 1828.80 119 GAL. HOT WATER TANK
58" 1473.20
ALARM SILENCING BUTTON 240VAC, 1-PHASE, 4kW IMMERSION HEATER E
48" 1219.20
51" 1295.40
E
WATER FILTER FOR EYEWASH Y-STRAINER
7" 177.80
1" 25.40
D
D
FLOW SWITCH ACTIVATED ALARM 60W GREEN AREA LIGHT FLASHES IN ALARM MODE FLOW SWITCH Y-STRAINER VACUUM BREAKER
ELECTRICAL CONNECTION CUSTOMER TO SUPPLY 208-240/120VAC 1-PHASE 3 WIRE + GROUND 30 AMP SERVICE
TEMPERATURE & PRESSURE RELIEF VALVE
C
C
SAFETY SHOWER AND EYEWASH 99 3/4" 2535.82
62" 1573.93 TO TOP OF JUNCTION BOX
LOCKABLE BALL VALVE B
COLD WATER INLET 1 1/4" IPS UNION TEMPERED WATER BLENDING SYSTEM (TWBS.SH)
B
14 1/2" 368.27
HOT WATER TEMP. GAUGE FULL LENGTH FORK LIFT SLOTS
A
CUSTOMER INFO / TAG #
091-XXXX
ECN NO. APPROVALS DRAWN S. GILL
A DATE 1/08
CHECKED
APPROVED
1455 KLEPPE LN SPARKS, NV
BACHWEG 3 CH3401 BURGDORF SWITZERLAND
TITLE
8760.21 & 22.31 TEMPERING SKID WITH SHOWER REV.
SIZE PART NO.
8760.21 & 22.31
C 8
7
6
DO NOT SCALE DRAWING
5
4
3
2
www.hawsco.com 775-359-4712
NTS
INSTALL
1
SHEET 1 OF 1
8760
Emergency Tempered Water Shower and Eye/Face Wash
FEATURES & BENEFITS QUALITY CONTROL Fully assembled and Engineer tested product that is ready for placement and hook-up. ALARM SYSTEM Standard with audible and visible alarms controlled by a flow switch for immediate attention to an emergency. BLENDING SYSTEM Safe, fully engineered thermostatic mixing valve for mixing large volumes of hot and cold water guarded with anti-scald protection and full flow cold water bypass to provide tempered water in adverse situations. TANK SYSTEM OPTIONS 119 Gallon (450 L) Tank (Option No. 21): Stores enough hot water to provide a single 15 minute, 20 gpm (75.7 L) shower. Recovery time of up to 6 hours (Also available in ASME - Option 22). 325 Gallon (1230 L) Tank (Option No. 23): stores enough hot water to provide two 15 minute, 20 gpm (75.7 L) showers before tank recovery is required. Recovery time of up to 18 hours. STEAM SYSTEMS Steam Heat Exchanger (Option No. 24): Feed forward instantaneous heat exchanger. Requires 15 PSIG, max. 1300 lb./hr. steam supply. SKID CONSTRUCTION Membrane encapsulated, fiberglass channel reinforced wooden structure with bright yellow elastomeric chemically resistant waterproof coating which is protected for long life with UV inhibitors. EYE/FACE WASH AXION MSR™ eye/face wash head (patent pending) uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity. EXPANDABLE/FLEXIBLE CAPABILITIES System can be designed to a number of variations including the hot water supply, the electrical type, and the blending capabilities. ELECTRICAL SYSTEM OPTIONS Haws’ standard system requires 208/240 VAC single phase, 3 wire 40 amp (min.), electrical supply. NEMA 4 tank (Option 31), steam (Option 36). NEMA 7 Class I, DIV2, Group B, C, D tank (Option 32), steam (Option 38) (Class l, DIV l also available)
OPTIONS To see all options for this model, visit www.hawsco.com
SPECIFICATIONS Model 8760 shower and eye/face wash shall include a membrane encapsulated, steel-reinforced 4' x 6' (1.2 x 1.82 m) wood skid with bright yellow elastomeric chemically resistant waterproof coating, protected with UV inhibitors. There ia a 20 gpm (75.7 L) shower, an eyewash that features the medically acclaimed AXION MSR™ eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity, along with 3 gpm (11.4 L) to supply the side hanging drench hose. Chrome-plated brass stay-open shower, eyewash, and drench hose ball valves equipped with stainless steel ball and stem, and protected by scald and freeze bleed valves. The standard alarm system is flow switch activated, and provides local audible and visible alarms. This single shower and/or eyewash or multiple shower/eyewash feeder is designed to operate with a number of tempering and electrical options. The tempered blending system will include an integral hot water supply, whether stored or supplied by steam, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system requires 208/240 VAC single phase, 3 wire 40 amp minimum.Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for /emergency Eyewash and Shower Equipment.
APPLICATIONS Perfect for indoor facilities that may encounter dangerous chemical hazards and need a complete decontamination station, and/or need a feeder to other remote booth substations, or other drench systems and/or eyewash stations.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 01 July, 2014 DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
7
8
6
5
1
2
3
4
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF HAWS CORPORATION.
97 1/4" 2472.54
F
F
72" 1828.80 119 GAL. HOT WATER TANK
58" 1473.20
ALARM SILENCING BUTTON 240VAC, 1-PHASE, 4kW IMMERSION HEATER E
48" 1219.20
51" 1295.40
E
WATER FILTER FOR EYEWASH Y-STRAINER
7" 177.80
1" 25.40
D
D
FLOW SWITCH ACTIVATED ALARM 60W GREEN AREA LIGHT FLASHES IN ALARM MODE FLOW SWITCH Y-STRAINER VACUUM BREAKER
ELECTRICAL CONNECTION CUSTOMER TO SUPPLY 208-240/120VAC 1-PHASE 3 WIRE + GROUND 30 AMP SERVICE
TEMPERATURE & PRESSURE RELIEF VALVE
C
C
SAFETY SHOWER AND EYEWASH 99 3/4" 2535.82
62" 1573.93 TO TOP OF JUNCTION BOX
LOCKABLE BALL VALVE B
COLD WATER INLET 1 1/4" IPS UNION TEMPERED WATER BLENDING SYSTEM (TWBS.SH)
B
14 1/2" 368.27
HOT WATER TEMP. GAUGE FULL LENGTH FORK LIFT SLOTS
A
CUSTOMER INFO / TAG #
091-XXXX
ECN NO. APPROVALS DRAWN S. GILL
A DATE 1/08
CHECKED
APPROVED
1455 KLEPPE LN SPARKS, NV
BACHWEG 3 CH3401 BURGDORF SWITZERLAND
TITLE
8760.21 & 22.31 TEMPERING SKID WITH SHOWER REV.
SIZE PART NO.
8760.21 & 22.31
C 8
7
6
DO NOT SCALE DRAWING
5
4
3
2
www.hawsco.com 775-359-4712
NTS
INSTALL
1
SHEET 1 OF 1
