Motorola RAZR V3i Battery Replacement The battery in your phone is the single most important component in the entire device and it is also the easiest to repair. Using this guide, you will be able to install a replacement battery for your Motorola RAZR V3i.
Remove the battery by pushing down on it from the top while gently pulling it outwards.
Be careful not use too much force as the battery retaining tab could be damaged. Step 4
Insert the replacement battery by gently pushing the bottom of the battery into the battery recess. Then, push the top in until the battery retaining tab clicks over it, holding it in place.
Be careful when inserting the battery under the retaining tab as it can break if too much force is applied.
Place the back cover back on the phone by inserting the bottom first followed by the top, and press down gently until it clicks into place.
We recommend to charge the phone for 24 hours before using it to properly initialize the new battery. This isn't required, but it will speed up the "break-in" period with the new battery.
This document was last generated on 2017-06-20 09:23:40 PM.