Multi-head motorized pay off - LINTTOP
达普电 缆技术有 限公司
LINT TOP CABLE TECHNOLOGY CO., LTD.
NO
LO
G Y
CO
.,
LT D.
Multi-head motorized pay off
1. Machine performance:
CH
This machine can automatically track the pay-off speed and can provide constant tension. Tension adjustment is implemented by adjusting the pressure of compressed air. It can emergency stop in cases of shutdown and
TE
wire breakage. And it can provide single reel pay-off and dual pay-off. Processing system of top and bottom
CA
2. Main parameters:
BL
E
wire reels is available on market.
2.1 Pay-off speed: 0-300m/min
P
2.2 Motor power: 2.2KW
TO
2.3 Cross section area of conductors: min 0.07mm2,max 1.57mm2 2.4 Diameter of single wire: 0.10-0.50mm
NT
2.5 Diameter of wire reel cylinder: 224-355mm 2.6 Diameter of wire reel side plate: 500-630mm
LI
2.7 Diameter of wire reel axial hole: min100mm 2.8 Suitable wire reel: 500-630mm 1 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
达普电 缆技术有 限公司
LINT TOP CABLE TECHNOLOGY CO., LTD. 3. Machine installation: Put the machine onto work place and level it with cushion blocks. Connect phase lines and null line as shown
LT D.
in the drawings and connect the gas path. Switch on the power switch (three air circuit breakers, which are respectively the mains switch, power switch for left wire reel and power switch for right wire reel) in the electricity cabinet of the machine. Turn on the control switch on the panel, and move the machine dancer
CA
BL
E
TE
CH
NO
LO
G
Y
regulating valve in the regulating panel can change the tension of paying-off.
CO
.,
roller. Thus the wire reel can accelerate or decelerate with the angle change of the roller and then the pressure
4. Machine commissioning:
TO P
Parameters of the machine’s frequency inverter have already been well set in factory. If it is found that during using, the actions are not in accordance with the host machine, please call us for consultant. Adjusting
NT
without authorization is forbidden (very important), or the performance of the machine will be affected. When mounting wire reel, put the wire reel on a hydraulic trolley (available on market), raise the hydraulic
LI
trolley until center of the wire reel is aligned with the axis of the pay-off, push in hydraulic trolley, inching
brake releasing button on the operation panel, move the pay-off axis to align the carrying bolt with the carrying hole of the wire reel, fit on external sleeve gasket and U type cover plate, fasten the nuts, and then 2 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
达普电 缆技术有 限公司
LINT TOP CABLE TECHNOLOGY CO., LTD. the mounting of wire reel is finished. Lead the wire on the reel out in the wire routing direction shown on the drawing (pushing down the inching
LT D.
button and keeping it can release the brake, and then the wire reel can be rotated by hand).
.,
Both double-head and multi-head motorized pay off, we have model: 500/630, 630/800.
CO
If anything you are interested in, please contact us freely, we will send you technical offer or quotation for
LI
NT
TO P
CA
BL
E
TE
CH
NO
LO
G
Y
your reference.
3 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
LINT TOP CABLE TECHNOLOGY CO., LTD.
NO
LO
G Y
CO
.,
LT D.
Multi-head motorized pay off
1. Machine performance:
CH
This machine can automatically track the pay-off speed and can provide constant tension. Tension adjustment is implemented by adjusting the pressure of compressed air. It can emergency stop in cases of shutdown and
TE
wire breakage. And it can provide single reel pay-off and dual pay-off. Processing system of top and bottom
CA
2. Main parameters:
BL
E
wire reels is available on market.
2.1 Pay-off speed: 0-300m/min
P
2.2 Motor power: 2.2KW
TO
2.3 Cross section area of conductors: min 0.07mm2,max 1.57mm2 2.4 Diameter of single wire: 0.10-0.50mm
NT
2.5 Diameter of wire reel cylinder: 224-355mm 2.6 Diameter of wire reel side plate: 500-630mm
LI
2.7 Diameter of wire reel axial hole: min100mm 2.8 Suitable wire reel: 500-630mm 1 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
达普电 缆技术有 限公司
LINT TOP CABLE TECHNOLOGY CO., LTD. 3. Machine installation: Put the machine onto work place and level it with cushion blocks. Connect phase lines and null line as shown
LT D.
in the drawings and connect the gas path. Switch on the power switch (three air circuit breakers, which are respectively the mains switch, power switch for left wire reel and power switch for right wire reel) in the electricity cabinet of the machine. Turn on the control switch on the panel, and move the machine dancer
CA
BL
E
TE
CH
NO
LO
G
Y
regulating valve in the regulating panel can change the tension of paying-off.
CO
.,
roller. Thus the wire reel can accelerate or decelerate with the angle change of the roller and then the pressure
4. Machine commissioning:
TO P
Parameters of the machine’s frequency inverter have already been well set in factory. If it is found that during using, the actions are not in accordance with the host machine, please call us for consultant. Adjusting
NT
without authorization is forbidden (very important), or the performance of the machine will be affected. When mounting wire reel, put the wire reel on a hydraulic trolley (available on market), raise the hydraulic
LI
trolley until center of the wire reel is aligned with the axis of the pay-off, push in hydraulic trolley, inching
brake releasing button on the operation panel, move the pay-off axis to align the carrying bolt with the carrying hole of the wire reel, fit on external sleeve gasket and U type cover plate, fasten the nuts, and then 2 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
达普电 缆技术有 限公司
LINT TOP CABLE TECHNOLOGY CO., LTD. the mounting of wire reel is finished. Lead the wire on the reel out in the wire routing direction shown on the drawing (pushing down the inching
LT D.
button and keeping it can release the brake, and then the wire reel can be rotated by hand).
.,
Both double-head and multi-head motorized pay off, we have model: 500/630, 630/800.
CO
If anything you are interested in, please contact us freely, we will send you technical offer or quotation for
LI
NT
TO P
CA
BL
E
TE
CH
NO
LO
G
Y
your reference.
3 ADD: ROOM 2406, BUILDING A, HENGSHENG PLAZA, WEST JIANGUO ROAD, XUZHOU CITY, 221006, P. R.CHINA
TEL: 0086-516-87318029/87318026
FAX: 0086-516-87318029
EMAIL: [email protected]
