ncy Type - Kemet
AC Line Filters
SC Coils, SC-D High Frequency Type Overview
Applications
The KEMET SC Coils, SC-D High Frequency Type AC line filters are offered in a wide variety of sizes and specifications.
• Consumer Electronics • Common mode choke
Benefits High Frequency Type
]
nce ) .
• Wide variety of sizes and specifications • Inductances up to 100 µH • Rated Currents up to 20 A • DC Resistances as low as 8 mΩ
DC resistance pin pitch Temperature Finished dimensions(mm) (m /line) (reference) rise(K) OD(max.) T(max.) max. max. b a 40 23 13 10 13 70 23 13 10 13 40 Part Number System40 40 25 19 10 19 25 SC10D 40 25 19 10 19 20 45 34 (A) 23 22 21 30 Series Rated Current Type 45 0x = x A (e.g., 0534 23 D = Ni-Zn ferrite 22 core,21 16 SC= 5 A) high xx = xx A (e.g., 10 = 10 A) frequency 12 50 34 23 22 21 8 50 34 23 22 21
Weight approx. (g) 0.5 7 0.6 8 0.7 14 05014 0.8 1.0 30 (µH) Minimum Inductance xxx1.2 = xxx µH (e.g., 34 100 = 100 µH) 0xx1.4 = xx µH (e.g., 060 34= 60 µH) 1.7 33
Wire size (mmø)
tanding voltage: 2400V (2 sec between lines) than 100M (between lines) • Thermal class: A (105˚C) to T (T=105–temperature rise) • Inductance measurement condition:100kHz, 1mA, KC547 nteed values.
pe (2A to 5A)
SC-D horizontal type (8A to 20A)
One world. One KEMET
864-963-6300T• www.kemet.com T © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, ODSC 29606 • 15±2.0
(a)
2
LF0013_SC-D • 3/28/2017
(a) 1
1
AC Line Filters – SC Coils, SC-D High Frequency Type
Dimensions – Millimeters Vertical Type (≤ 5 A) OD
T
T
OD
OD 15±2.0
(a)
(a) 12
2
34
4
T
(a) 2
2 1
4
4 3
(a)
13 4 2 13 4 2 (a) (b) (a)
15±2.0
15±2.0
1
(b)
(b)
(b)
1
T 15±2.0
(b)
OD
Horizontal Type (≥ 8 A)
3
3
(b)
Mounting Pitch T
(a) 1
(b)
2
4
3
Environmental Compliance All KEMET AC Line Filters are RoHS Compliant.
RoHS Compliant
Table 1 – Ratings & Part Number Reference DC Finished Pin Pitch1 Rated Inductance Temperature Resistance/ Part Number Current (µH) Rise (K) Dimensions (mm) (reference) Line (mΩ) OD T AC (A) Minimum Maximum a b Maximum (Maximum) (Maximum) SC-02-D100 SC-03-D050 SC-04-D050 SC-05-D030 SC-08-D060 SC-10-D050 SC-15-D030 SC-20-D010 1
2 3 4 5 8 10 15 20
100 50 50 30 60 50 30 10
70 40 25 20 30 16 12 8
40 40 40 40 45 45 50 50
23 23 25 25 34 34 34 34
13 13 19 19 23 23 23 23
10 10 10 10 22 22 22 22
13 13 19 19 21 21 21 21
Wire Weight (g) Diameter Approximate (mm) 0.5 0.5 0.7 0.8 1.0 1.2 1.4 1.7
7 8 14 14 30 34 34 33
Pin pitch listed above for reference only. Values not guaranteed.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
2
Shape and Dimensions SC-D vertical type (2A to 5A)
SC-D horizontal type (8A to 20A)
T
OD
OD
AC Line Filters – SC Coils, SC-D High Frequency Type
15±2.0
T
(a)
(a)
Specifications
1
2
(b)
(b)
1
2
Rated Voltage
13 42 (a)
Withstanding Voltage
SC-D 3
15±2.0
Item
[mm]
2,400 V (2 seconds, between lines) > 100 MΩ at 500 VDC (between lines)
Numbering System Thermal Class
A (105°C) 1toRated (A) −25°C T (T =current 105 – temperature rise)
SC - 02 - D 100 Range Operating Temperature �
3
250 VAC/VDC
(b)
Insulation Resistance
�
4 4
Ni-Zn ferrite core
�
Inductance Measurement Condition
100 kHz, 1 mA, KC547 Inductance (μH)
Frequency Characteristics Frequency characteristic
Impedance (Ω)
100K 10K 1K 100 10
1M
1 6 3
03-D050
1 6 3
04-D050
1 6 3 1 6 3
02-D100
1 6 3 1 6 3
1 1K
100k
Impedance (Ω)
1M
05-D030
10k 1k 100 10
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
1
1 6 3 1 6 3
08-D060
1 6 3
10-D050
1 6 3
15-D030
1 6 3 1 6 3
1k
20-D010
3
6
1
10k
Notes on Use
3
6
1
100k
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
AC Line Filters
23
Shelf Life • Use within 6 months. If the product is used after a storage period of 6 months or longer, confirm its solderability before use. Storage Condition • Avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. • Avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. • Avoid storage near strong magnetic field, as such condition may magnetize the product.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
3
AC Line Filters – SC Coils, SC-D High Frequency Type
KEMET Electronic Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
4
SC Coils, SC-D High Frequency Type Overview
Applications
The KEMET SC Coils, SC-D High Frequency Type AC line filters are offered in a wide variety of sizes and specifications.
• Consumer Electronics • Common mode choke
Benefits High Frequency Type
]
nce ) .
• Wide variety of sizes and specifications • Inductances up to 100 µH • Rated Currents up to 20 A • DC Resistances as low as 8 mΩ
DC resistance pin pitch Temperature Finished dimensions(mm) (m /line) (reference) rise(K) OD(max.) T(max.) max. max. b a 40 23 13 10 13 70 23 13 10 13 40 Part Number System40 40 25 19 10 19 25 SC10D 40 25 19 10 19 20 45 34 (A) 23 22 21 30 Series Rated Current Type 45 0x = x A (e.g., 0534 23 D = Ni-Zn ferrite 22 core,21 16 SC= 5 A) high xx = xx A (e.g., 10 = 10 A) frequency 12 50 34 23 22 21 8 50 34 23 22 21
Weight approx. (g) 0.5 7 0.6 8 0.7 14 05014 0.8 1.0 30 (µH) Minimum Inductance xxx1.2 = xxx µH (e.g., 34 100 = 100 µH) 0xx1.4 = xx µH (e.g., 060 34= 60 µH) 1.7 33
Wire size (mmø)
tanding voltage: 2400V (2 sec between lines) than 100M (between lines) • Thermal class: A (105˚C) to T (T=105–temperature rise) • Inductance measurement condition:100kHz, 1mA, KC547 nteed values.
pe (2A to 5A)
SC-D horizontal type (8A to 20A)
One world. One KEMET
864-963-6300T• www.kemet.com T © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, ODSC 29606 • 15±2.0
(a)
2
LF0013_SC-D • 3/28/2017
(a) 1
1
AC Line Filters – SC Coils, SC-D High Frequency Type
Dimensions – Millimeters Vertical Type (≤ 5 A) OD
T
T
OD
OD 15±2.0
(a)
(a) 12
2
34
4
T
(a) 2
2 1
4
4 3
(a)
13 4 2 13 4 2 (a) (b) (a)
15±2.0
15±2.0
1
(b)
(b)
(b)
1
T 15±2.0
(b)
OD
Horizontal Type (≥ 8 A)
3
3
(b)
Mounting Pitch T
(a) 1
(b)
2
4
3
Environmental Compliance All KEMET AC Line Filters are RoHS Compliant.
RoHS Compliant
Table 1 – Ratings & Part Number Reference DC Finished Pin Pitch1 Rated Inductance Temperature Resistance/ Part Number Current (µH) Rise (K) Dimensions (mm) (reference) Line (mΩ) OD T AC (A) Minimum Maximum a b Maximum (Maximum) (Maximum) SC-02-D100 SC-03-D050 SC-04-D050 SC-05-D030 SC-08-D060 SC-10-D050 SC-15-D030 SC-20-D010 1
2 3 4 5 8 10 15 20
100 50 50 30 60 50 30 10
70 40 25 20 30 16 12 8
40 40 40 40 45 45 50 50
23 23 25 25 34 34 34 34
13 13 19 19 23 23 23 23
10 10 10 10 22 22 22 22
13 13 19 19 21 21 21 21
Wire Weight (g) Diameter Approximate (mm) 0.5 0.5 0.7 0.8 1.0 1.2 1.4 1.7
7 8 14 14 30 34 34 33
Pin pitch listed above for reference only. Values not guaranteed.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
2
Shape and Dimensions SC-D vertical type (2A to 5A)
SC-D horizontal type (8A to 20A)
T
OD
OD
AC Line Filters – SC Coils, SC-D High Frequency Type
15±2.0
T
(a)
(a)
Specifications
1
2
(b)
(b)
1
2
Rated Voltage
13 42 (a)
Withstanding Voltage
SC-D 3
15±2.0
Item
[mm]
2,400 V (2 seconds, between lines) > 100 MΩ at 500 VDC (between lines)
Numbering System Thermal Class
A (105°C) 1toRated (A) −25°C T (T =current 105 – temperature rise)
SC - 02 - D 100 Range Operating Temperature �
3
250 VAC/VDC
(b)
Insulation Resistance
�
4 4
Ni-Zn ferrite core
�
Inductance Measurement Condition
100 kHz, 1 mA, KC547 Inductance (μH)
Frequency Characteristics Frequency characteristic
Impedance (Ω)
100K 10K 1K 100 10
1M
1 6 3
03-D050
1 6 3
04-D050
1 6 3 1 6 3
02-D100
1 6 3 1 6 3
1 1K
100k
Impedance (Ω)
1M
05-D030
10k 1k 100 10
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
1
1 6 3 1 6 3
08-D060
1 6 3
10-D050
1 6 3
15-D030
1 6 3 1 6 3
1k
20-D010
3
6
1
10k
Notes on Use
3
6
1
100k
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
AC Line Filters
23
Shelf Life • Use within 6 months. If the product is used after a storage period of 6 months or longer, confirm its solderability before use. Storage Condition • Avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. • Avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. • Avoid storage near strong magnetic field, as such condition may magnetize the product.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
3
AC Line Filters – SC Coils, SC-D High Frequency Type
KEMET Electronic Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
LF0013_SC-D • 3/28/2017
4
