Nordfab Doesn't Leave You Hanging; They Support ... - Nordfab Ducting
Quick-Fit
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Parts Pipe Hanger • 3”-24” made from galvanized steel 14 GA.
Gripple Pipe Hanger • Comes in length of 15 feet.
• Clearance hole 5/16”.
• Not available in SS.
• Bolts are supplied with hanger. • Over 24 inches made from 3/16” flat bar steel.
Pipe Hanger HJ
Beam Clamp • 3”-24” made from galvanized steel 14 GA. • Clearance hole 7/16”. • Bolts are supplied with hanger.
Pipe Bracing
• Speed up connection of pipe bracing to building steel members.
• Galvanized. • Supplied in standard length of 10 feet. • Cut to desired length - flatten ends - drill one end with 3/8” bit - connect this end to pipe hanger and clamp or bolt other end to suspension point. • NOT Flattened or Drilled.
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
Quick-Fit
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Pipe Stands
Note: This special type of pipe stand and hanger are used in certain situations, such as at trade shows and tight installations. 1/4” x 2” Eyebolt Both Ends 1/4” Turnbuckle
1/4” Square Tubing
1/8” Cable with Clamp Both Ends
Pipe See Chart Std. Pipe Hanger See Detail At Right
1/4” x 2” Eyebolt
1” ID Pipe 7 Ft Long 5/8” Nut w/ T-Handle
30.00
1 1/4” ID Pipe 10 Ft Long
Available in 3’, 7’ and 10’ High Base
Bend at 90 deg. Typical 5/8” Nut w/ T-Handle
1 1/4” Square Tubing Mtg Angle Size to Suit Std Pipe Hanger
Drill 3/8” Dia. Holes Type 2 Each Hanger 5/8” x 1 ½” Bolt Welt to Hanger
Width & Height Dia. + 4” 10 Ft of 1/8” Cable 2 Clamps and 1 Turnbuckle Ea. Side Std. Pipe Hanger
1 1/4” Square Tubing 1/4” x 2” Eyebolt Both Sides
1” ID Pipe 7 Ft Long Weld To Frame
20” x 20” x 1/4” Plate
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
Quick-Fit
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Mountings
Ceiling
Wall “D1” Hanger Size
½”Conduit Beam Clamp
Pipe Hanger
Weld 1.5” x 3/16” Flat Bar Weld
Weld
Typ. Material 1- 1/2”x 3/16” Angle Bar
½”Conduit Beam Clamp
½”Conduit
Beam Clamp
1/2” Dia Hole Typ. 3-Places
Pipe Hanger
Weld Pipe Hanger
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Parts Pipe Hanger • 3”-24” made from galvanized steel 14 GA.
Gripple Pipe Hanger • Comes in length of 15 feet.
• Clearance hole 5/16”.
• Not available in SS.
• Bolts are supplied with hanger. • Over 24 inches made from 3/16” flat bar steel.
Pipe Hanger HJ
Beam Clamp • 3”-24” made from galvanized steel 14 GA. • Clearance hole 7/16”. • Bolts are supplied with hanger.
Pipe Bracing
• Speed up connection of pipe bracing to building steel members.
• Galvanized. • Supplied in standard length of 10 feet. • Cut to desired length - flatten ends - drill one end with 3/8” bit - connect this end to pipe hanger and clamp or bolt other end to suspension point. • NOT Flattened or Drilled.
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
Quick-Fit
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Pipe Stands
Note: This special type of pipe stand and hanger are used in certain situations, such as at trade shows and tight installations. 1/4” x 2” Eyebolt Both Ends 1/4” Turnbuckle
1/4” Square Tubing
1/8” Cable with Clamp Both Ends
Pipe See Chart Std. Pipe Hanger See Detail At Right
1/4” x 2” Eyebolt
1” ID Pipe 7 Ft Long 5/8” Nut w/ T-Handle
30.00
1 1/4” ID Pipe 10 Ft Long
Available in 3’, 7’ and 10’ High Base
Bend at 90 deg. Typical 5/8” Nut w/ T-Handle
1 1/4” Square Tubing Mtg Angle Size to Suit Std Pipe Hanger
Drill 3/8” Dia. Holes Type 2 Each Hanger 5/8” x 1 ½” Bolt Welt to Hanger
Width & Height Dia. + 4” 10 Ft of 1/8” Cable 2 Clamps and 1 Turnbuckle Ea. Side Std. Pipe Hanger
1 1/4” Square Tubing 1/4” x 2” Eyebolt Both Sides
1” ID Pipe 7 Ft Long Weld To Frame
20” x 20” x 1/4” Plate
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
Quick-Fit
THE WORLD’S FASTEST DUCTING
Nordfab Doesn’t Leave You Hanging; They Support You In Ways Others Don’t Mountings
Ceiling
Wall “D1” Hanger Size
½”Conduit Beam Clamp
Pipe Hanger
Weld 1.5” x 3/16” Flat Bar Weld
Weld
Typ. Material 1- 1/2”x 3/16” Angle Bar
½”Conduit Beam Clamp
½”Conduit
Beam Clamp
1/2” Dia Hole Typ. 3-Places
Pipe Hanger
Weld Pipe Hanger
If there are other ways NORDFAB can support you please contact your Local Sales Representative or call NORDFAB so we can connect you with your Local Sales Representative
866-455-2130
www.ductingsystems.com
Fax: 636-349-0556
