Palm Pilot Professional 3com Keypad Replacement

Palm Pilot Professional 3com Keypad Replacement

Palm Pilot Professional 3com Keypad Replacement Installing a new keypad make sure to have a replacement keypad on hand.

Written By: Kevin Santos

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Palm Pilot Professional 3com Keypad Replacement

INTRODUCTION How to install a new keypad if your buttons malfunction or are worn.

TOOLS: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Palm Pilot Professional 3com Keypad Replacement

Step 1 — Keypad 

Unscrew the three screws on the back of the Palm Pilot.

Step 2



Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Palm Pilot Professional 3com Keypad Replacement

Step 3 

The front plastic cover is now free to be removed from the rest of the device.



The keypad is now free to be removed from the rest of the device.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 07:55:58 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4