Pantech Breakout Micro SD/SIM Card Replacement
Pantech Breakout Micro SD/SIM Card Replacement
Pantech Breakout Micro SD/SIM Card Replacement This guide will show you how to insert or remove a Micro SD or SIM card for the Pantech Breakout.
Written By: Ryan Murphy
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 1 — Removing Back Cover
Before proceeding, completely power off phone and disconnect power cords to avoid electrical shock.
Turn phone over so that the back side is facing up.
Using a finger, apply moderate pressure to the top of the back cover while sliding the cover down and off.
Lift and remove the back cover from the phone.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 2 — Removing the Battery
Locate the battery: It is a silver, rectangular object.
Insert a fingernail into the indent just below the battery about 0.5 inches from the bottom of the phone.
Then, apply pressure to the battery, pushing up and away from the phone. It will come out easily.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 3 — Inserting Micro SD or SIM Card
The slots for the Micro SD and SIM cards are directly above the battery tray.
To insert a card, slide it face up into the slot. To remove a card, slide the card out from the slot.
Micro SD Card Slot - On the Left
SIM Card Slot - On the Right
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 06:48:04 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Pantech Breakout Micro SD/SIM Card Replacement This guide will show you how to insert or remove a Micro SD or SIM card for the Pantech Breakout.
Written By: Ryan Murphy
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 1 — Removing Back Cover
Before proceeding, completely power off phone and disconnect power cords to avoid electrical shock.
Turn phone over so that the back side is facing up.
Using a finger, apply moderate pressure to the top of the back cover while sliding the cover down and off.
Lift and remove the back cover from the phone.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 2 — Removing the Battery
Locate the battery: It is a silver, rectangular object.
Insert a fingernail into the indent just below the battery about 0.5 inches from the bottom of the phone.
Then, apply pressure to the battery, pushing up and away from the phone. It will come out easily.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Pantech Breakout Micro SD/SIM Card Replacement
Step 3 — Inserting Micro SD or SIM Card
The slots for the Micro SD and SIM cards are directly above the battery tray.
To insert a card, slide it face up into the slot. To remove a card, slide the card out from the slot.
Micro SD Card Slot - On the Left
SIM Card Slot - On the Right
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 06:48:04 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
