Panther - Drive Engineer
Panther® Synchronous Drive Belt
Performance Driven. Performance Proven. ■■
High performance advanced polymer compound
■■
Graphite impregnated fabric facing for improved wear resistance
■■
Optimized cord for high torque loading
Superior performance in HTS®, PowerGrip® GT®2 and RPP® sprockets as well as HPPD, Hawk Pd® and HTD® sprockets* ■■
■■
Available in 8, 14, and 20mm sizes
www.carlislebelts.com
Panther Synchronous Drive Belt ■■ ■■ ■■ ■■
ULTRA-CORD® TENSILE MEMBER ADVANCED POLYMER COMPOUND MAINTENANCE-FREE ENERGY EFFICIENT
Panther® belts are designed to improve performance and drive life while reducing maintenance and downtime. The energy efficient Panther belt offers higher torque capacity than the Carlisle® Synchro-Cog® HT belt and conventional synchronous belts.
1
Ultra-Cord Tensile Member ■■ Improved belt life ■■ Higher strength ■■ Reduced tension decay ■■ Dimensional stability
2
Nylon Tooth Facing ■■ Graphite-loaded ■■ Self-lubricating ■■ Wear resistant
3
RPP Profile ■■ Greater transfer of power ■■ Jump and shear resistant
4
Backing ■■ Precision ground ■■ Smooth operation with backside idler ■■ Wear resistant
5
Advanced Polymer Compound ■■ Increased performance ■■ Increased belt life
Recommended Sprockets: HTS® sprockets (8M, 14M, 20M)
8M
14M
8mm
Strong
20M
14mm 20mm
Designed with our Ultra-Cord non-aramid fiber tensile member that delivers strength and dimensional stability.
Accelerated 8M Belt Life Test
Accelerated 14M Belt Life Test
140
500
Resilient
120
Uniquely engineered teeth are made of an advanced polymer compound which increases both the strength and abrasion resistance of the teeth.
100 80
300
60
200
Energy Efficient
40
Panther belts perform at 98% operating efficiency for reduced energy consumption.
20
Panther Power Panther belts offers higher power ratings than conventional rubber synchronous belts.
400
118
0
34 Panther
Competitor
Average hours in PGGT2* sprockets High Torque, High Tension, 3000 rpm
433
100 0
Panther
55 Competitor
Average hours in PGGT2* sprockets High Torque, High Tension, 1800 rpm
* Hawk Pd® is a registered trademark of ContiTech AG or its affiliates. HTS® is a registered trademark of Martin Sprocket & Gear, Inc. PowerGrip®, GT®, and HTD® are registered trademarks of Gates Corporation or its affiliates. PGGT2 = PowerGrip® GT®2
The Timken team applies their know-how to improve the reliability and performance of machinery in diverse markets worldwide. The company designs, makes and markets high-performance mechanical components, including bearings, gears, chain, belts, couplings, and related mechanical power transmission products and services.
For full warranty details see our catalog or go to www. carlislebelts.com/warranty.
www.carlislebelts.com
5M 07-17 Order No. 10898 | Timken® is a registered trademark of The Timken Company. Carlisle® is a registered trademark used under license. Panther ®, Ultra-Cord®, Synchro-Cog®, and RPP ® are registered trademarks of Timken Belts. | © 2017 The Timken Company | Printed in USA
Panther® Synchronous Drive Belt
Performance Driven. Performance Proven. ■■
High performance advanced polymer compound
■■
Graphite impregnated fabric facing for improved wear resistance
■■
Optimized cord for high torque loading
Superior performance in HTS®, PowerGrip® GT®2 and RPP® sprockets as well as HPPD, Hawk Pd® and HTD® sprockets* ■■
■■
Available in 8, 14, and 20mm sizes
www.carlislebelts.com
Panther Synchronous Drive Belt ■■ ■■ ■■ ■■
ULTRA-CORD® TENSILE MEMBER ADVANCED POLYMER COMPOUND MAINTENANCE-FREE ENERGY EFFICIENT
Panther® belts are designed to improve performance and drive life while reducing maintenance and downtime. The energy efficient Panther belt offers higher torque capacity than the Carlisle® Synchro-Cog® HT belt and conventional synchronous belts.
1
Ultra-Cord Tensile Member ■■ Improved belt life ■■ Higher strength ■■ Reduced tension decay ■■ Dimensional stability
2
Nylon Tooth Facing ■■ Graphite-loaded ■■ Self-lubricating ■■ Wear resistant
3
RPP Profile ■■ Greater transfer of power ■■ Jump and shear resistant
4
Backing ■■ Precision ground ■■ Smooth operation with backside idler ■■ Wear resistant
5
Advanced Polymer Compound ■■ Increased performance ■■ Increased belt life
Recommended Sprockets: HTS® sprockets (8M, 14M, 20M)
8M
14M
8mm
Strong
20M
14mm 20mm
Designed with our Ultra-Cord non-aramid fiber tensile member that delivers strength and dimensional stability.
Accelerated 8M Belt Life Test
Accelerated 14M Belt Life Test
140
500
Resilient
120
Uniquely engineered teeth are made of an advanced polymer compound which increases both the strength and abrasion resistance of the teeth.
100 80
300
60
200
Energy Efficient
40
Panther belts perform at 98% operating efficiency for reduced energy consumption.
20
Panther Power Panther belts offers higher power ratings than conventional rubber synchronous belts.
400
118
0
34 Panther
Competitor
Average hours in PGGT2* sprockets High Torque, High Tension, 3000 rpm
433
100 0
Panther
55 Competitor
Average hours in PGGT2* sprockets High Torque, High Tension, 1800 rpm
* Hawk Pd® is a registered trademark of ContiTech AG or its affiliates. HTS® is a registered trademark of Martin Sprocket & Gear, Inc. PowerGrip®, GT®, and HTD® are registered trademarks of Gates Corporation or its affiliates. PGGT2 = PowerGrip® GT®2
The Timken team applies their know-how to improve the reliability and performance of machinery in diverse markets worldwide. The company designs, makes and markets high-performance mechanical components, including bearings, gears, chain, belts, couplings, and related mechanical power transmission products and services.
For full warranty details see our catalog or go to www. carlislebelts.com/warranty.
www.carlislebelts.com
5M 07-17 Order No. 10898 | Timken® is a registered trademark of The Timken Company. Carlisle® is a registered trademark used under license. Panther ®, Ultra-Cord®, Synchro-Cog®, and RPP ® are registered trademarks of Timken Belts. | © 2017 The Timken Company | Printed in USA
Panther® Synchronous Drive Belt
