pfa tech issue 3 - Future Automation
PFA Plasma Flat Mount 'Group A' Technical Sheet
Sheet 1 of 3 ISSUE: 003 www.futureautomation.co.uk
FUNCTION The PFA mount enables a 37" to 50" screen to be mounted on a wall, keeping it as flat as possible to the wall itself.
SUITABILITY All screens in our 'Group A' will fix straight on to the PFA. Can be fitted in a recess.
SPECIFYING Check the wall make up for suitability. Check viewing angles and position.
WALL FIXINGS
WARNING It is the responsiblity of the installer to make sure this product is safely secured to the wall or ceiling.
No fixings are provided with this product. Consider using rawlbolts or resin anchors. Resin anchors are ideal for softer brickwork or blocks.
FUTUREAUTOMATION
PFA Plasma Flat Mount 'Group A'
Sheet 2 of 3 ISSUE: 003 www.futureautomation.co.uk
Technical Sheet
130
16
180
527
103
84
220
401mm Max. Vertical Mount Distance 260
180
FIXING Fix wall plate to wall Fix frame to plasma screen 130
690mm Max. Horizontal Mount Distance
279
Hang plasma on wall mounted frame
FIXING
720 6 main fixing holes on the wall plate
30
Wall plate must be fixed on a strong, solid surfce.
FUTUREAUTOMATION
PFA Plasma Flat Mount 'Group A' Technical Sheet
Recess Mounting
Sheet 3 of 3 ISSUE: 003 www.futureautomation.co.uk The screen drops down by 5mm when hooked on to the PFA bracket. The recess gap can be as little as 10mm.
Make sure your chosen screen is well ventilated in the recess.
10mm
The whole area of the wall plate needs to be well supported. Ideally solid plaster over brickwork. If stud work then thick timber (50mm) to screw into around the top six mounting holes.
Depth of recess should be screen depth + 30mm + 10mm spare
FUTUREAUTOMATION
Sheet 1 of 3 ISSUE: 003 www.futureautomation.co.uk
FUNCTION The PFA mount enables a 37" to 50" screen to be mounted on a wall, keeping it as flat as possible to the wall itself.
SUITABILITY All screens in our 'Group A' will fix straight on to the PFA. Can be fitted in a recess.
SPECIFYING Check the wall make up for suitability. Check viewing angles and position.
WALL FIXINGS
WARNING It is the responsiblity of the installer to make sure this product is safely secured to the wall or ceiling.
No fixings are provided with this product. Consider using rawlbolts or resin anchors. Resin anchors are ideal for softer brickwork or blocks.
FUTUREAUTOMATION
PFA Plasma Flat Mount 'Group A'
Sheet 2 of 3 ISSUE: 003 www.futureautomation.co.uk
Technical Sheet
130
16
180
527
103
84
220
401mm Max. Vertical Mount Distance 260
180
FIXING Fix wall plate to wall Fix frame to plasma screen 130
690mm Max. Horizontal Mount Distance
279
Hang plasma on wall mounted frame
FIXING
720 6 main fixing holes on the wall plate
30
Wall plate must be fixed on a strong, solid surfce.
FUTUREAUTOMATION
PFA Plasma Flat Mount 'Group A' Technical Sheet
Recess Mounting
Sheet 3 of 3 ISSUE: 003 www.futureautomation.co.uk The screen drops down by 5mm when hooked on to the PFA bracket. The recess gap can be as little as 10mm.
Make sure your chosen screen is well ventilated in the recess.
10mm
The whole area of the wall plate needs to be well supported. Ideally solid plaster over brickwork. If stud work then thick timber (50mm) to screw into around the top six mounting holes.
Depth of recess should be screen depth + 30mm + 10mm spare
FUTUREAUTOMATION
