Powder Bulk Solids Handling Equipment and Systems ...
Bulletin no. 100-303
Powder Bulk Solids Handling Equipment and Systems Engineered to Increase Productivity and Built to Last
SilentFlow® Bin Discharger
Rugged and Reliable Rotary Valves
STINGER® Screw Feeder
STINGER® Conveyor
TransVair® Mechanical Conveyor and Bulk Bag Unloading System
The Young Industries, Inc - 16 Painter Street - Muncy, PA 17756 800-546-3165 - [email protected] - www.younginds.com
Young Industries’ Product Summary Model “HC” Rotary Valves (high capacity drop-thru design) with larger throughput capacity than other rotary valves. Standard throughput capacity from .003 to 10.3 cu. ft/rev with square or round flanges for sizes 1” to 24” Model “LH” Rotary Valves (low headroom drop-thru design) has lower profile for applications requiring less headroom and when the valve is sized based on matching flange size. Standard throughput capacity from .008 to 5.587 cu. ft/rev with square or round flanges for sizes 4” to 24”
SilentFlow® Bin Dischargers used to solve the problem of handling and discharging difficult flowing bulk materials. Furnished as part of new or existing bin or silo. Cone angles of 60°, 45°, 30° as well as special designs STINGER® Screw Feeder developed to solve the problem of metering TIO2 , pigments and other cohesive powders.
Model “QC” Quick Clean Rotary Valves are engineered to minimize downtime in process applications requiring fast access to the valve's interior Easy to clean. No special tools or handling required. Available in a contaminant free design. Standard sizes of 4” through 18” Model “CA” Cantilevered Rotary Valves designed to minimize clean up downtime for process and sanitary applications. Disassembles at one end without using tools or for removal of the valve from the line. Sanitary and 3A Dairy Approved. Available in standard sizes of 4” through 18”
Model “SE” Side Entry Rotary Valves for handling pellets and chips under a head of product preventing clipping and jamming. Standard sizes 4” to 24”. Designed for 15 PSIG operation.
TransVair® Pneumatic Conveying Systems. Positive, negative, combination positive/negative pressure systems for handling dry bulk solid materials. Multi-Phase Pneumatic Conveyor, low velocity and low turbulence true dense phase pneumatic conveying systems. Multi-Flow Bulk Bag Unloading Frame uses a hoist to lift and position bulk bags safely and dependably.
Model “DP” Rotary Valves are engineered to airlock and meter powder and pellets into low velocity or dense phase pneumatic conveyors. Valves designed for handling 60 PSIG housing and differential pressures or high vacuum. Standard sizes of 4” through 20”
Model “BT” Blo-Thru” Rotary Valves for feeding sticky and cohesive material into a dilute phase pneumatic system. Also, the valve is used when headroom is a problem. Valve sizes 4” to 14” for 1” to 6” pipe or tubing size conveylines. Model “NJ” Rotary Valves (Non-Jamming) is a high capacity drop-thru airlock feeder design to meter pellets and chips over a wide range of throughput capacities without jamming of the rotor. Standard throughput capacity from .003 to 10.3 cu. ft/rev with square or round flanges for sizes 1” to 24” Model “HT” Rotary Valves are for High Temperature for application to requiring temperature 1500°F/815°C at 15 PSIG of internal pressures. Sizes 4” to 18” in HC and LH models. Model “ES” End Seal Rotary Valves are engineered for applications requiring lowest differential leakage. The end seals are adjustable front the exterior while the valve is operating. Sizes 4” to 18” in HC, LH, SE and CA models. Model “HP” Rotary Valves are for High Pressure for applications requiring internal pressures up to 350 PSIG at ambient temperatures. Sizes 4” to 18” in HC and LH models.
TransVair® Mechanical Conveyor handles materials ranging from sub-micron to ½” particle size, at any angle with distances up to 60 feet and capacity up to 1000 cu. ft. / hr. Available in right angle and “Z” configurations.
DFB with STINGER® or Direct-From-Bag Unloader is bulk bag handling system in place or need to use their handling system on several disperser tanks. The material moves freely without clogging, there is no waste of product and the material flows at a rate that matches the capability of the disperser. STINGER® Conveyor for conveying hard to handle materials like TIO2, carbon black and other pigments. It has also replace screw conveyors handling sugar, flour, calcium carbonate and abrasive produces like clays and ceramic powders that normally wear out screw conveyors in a short time.
Self-Contained Filter bag Dump Station is designed to provide maximum dust control for all powdered materials without external ducting, auxiliary fans or filters. Uni-Cage® Filter , modular horizontal and vertical cylindrical designs., automatic pulse jet cleaning standard. Horizontal Blenders, available in 115 basic sizes from ½ cu. ft. to 1500 cu. ft. Multi-Port® Gravity Blender for process variation and additive blending. Self-Aligning Pipe and Tube Flange Sets provide smooth continuous internal surface for liquid or dry material handling. Low pressure or high pressure models for either pipe of tubing.
Over
The Young Industries, Inc - 16 Painter Street - Muncy, PA 17756 800-546-3165 - [email protected] - www.younginds.com
60
Years of Service
Powder Bulk Solids Handling Equipment and Systems Engineered to Increase Productivity and Built to Last
SilentFlow® Bin Discharger
Rugged and Reliable Rotary Valves
STINGER® Screw Feeder
STINGER® Conveyor
TransVair® Mechanical Conveyor and Bulk Bag Unloading System
The Young Industries, Inc - 16 Painter Street - Muncy, PA 17756 800-546-3165 - [email protected] - www.younginds.com
Young Industries’ Product Summary Model “HC” Rotary Valves (high capacity drop-thru design) with larger throughput capacity than other rotary valves. Standard throughput capacity from .003 to 10.3 cu. ft/rev with square or round flanges for sizes 1” to 24” Model “LH” Rotary Valves (low headroom drop-thru design) has lower profile for applications requiring less headroom and when the valve is sized based on matching flange size. Standard throughput capacity from .008 to 5.587 cu. ft/rev with square or round flanges for sizes 4” to 24”
SilentFlow® Bin Dischargers used to solve the problem of handling and discharging difficult flowing bulk materials. Furnished as part of new or existing bin or silo. Cone angles of 60°, 45°, 30° as well as special designs STINGER® Screw Feeder developed to solve the problem of metering TIO2 , pigments and other cohesive powders.
Model “QC” Quick Clean Rotary Valves are engineered to minimize downtime in process applications requiring fast access to the valve's interior Easy to clean. No special tools or handling required. Available in a contaminant free design. Standard sizes of 4” through 18” Model “CA” Cantilevered Rotary Valves designed to minimize clean up downtime for process and sanitary applications. Disassembles at one end without using tools or for removal of the valve from the line. Sanitary and 3A Dairy Approved. Available in standard sizes of 4” through 18”
Model “SE” Side Entry Rotary Valves for handling pellets and chips under a head of product preventing clipping and jamming. Standard sizes 4” to 24”. Designed for 15 PSIG operation.
TransVair® Pneumatic Conveying Systems. Positive, negative, combination positive/negative pressure systems for handling dry bulk solid materials. Multi-Phase Pneumatic Conveyor, low velocity and low turbulence true dense phase pneumatic conveying systems. Multi-Flow Bulk Bag Unloading Frame uses a hoist to lift and position bulk bags safely and dependably.
Model “DP” Rotary Valves are engineered to airlock and meter powder and pellets into low velocity or dense phase pneumatic conveyors. Valves designed for handling 60 PSIG housing and differential pressures or high vacuum. Standard sizes of 4” through 20”
Model “BT” Blo-Thru” Rotary Valves for feeding sticky and cohesive material into a dilute phase pneumatic system. Also, the valve is used when headroom is a problem. Valve sizes 4” to 14” for 1” to 6” pipe or tubing size conveylines. Model “NJ” Rotary Valves (Non-Jamming) is a high capacity drop-thru airlock feeder design to meter pellets and chips over a wide range of throughput capacities without jamming of the rotor. Standard throughput capacity from .003 to 10.3 cu. ft/rev with square or round flanges for sizes 1” to 24” Model “HT” Rotary Valves are for High Temperature for application to requiring temperature 1500°F/815°C at 15 PSIG of internal pressures. Sizes 4” to 18” in HC and LH models. Model “ES” End Seal Rotary Valves are engineered for applications requiring lowest differential leakage. The end seals are adjustable front the exterior while the valve is operating. Sizes 4” to 18” in HC, LH, SE and CA models. Model “HP” Rotary Valves are for High Pressure for applications requiring internal pressures up to 350 PSIG at ambient temperatures. Sizes 4” to 18” in HC and LH models.
TransVair® Mechanical Conveyor handles materials ranging from sub-micron to ½” particle size, at any angle with distances up to 60 feet and capacity up to 1000 cu. ft. / hr. Available in right angle and “Z” configurations.
DFB with STINGER® or Direct-From-Bag Unloader is bulk bag handling system in place or need to use their handling system on several disperser tanks. The material moves freely without clogging, there is no waste of product and the material flows at a rate that matches the capability of the disperser. STINGER® Conveyor for conveying hard to handle materials like TIO2, carbon black and other pigments. It has also replace screw conveyors handling sugar, flour, calcium carbonate and abrasive produces like clays and ceramic powders that normally wear out screw conveyors in a short time.
Self-Contained Filter bag Dump Station is designed to provide maximum dust control for all powdered materials without external ducting, auxiliary fans or filters. Uni-Cage® Filter , modular horizontal and vertical cylindrical designs., automatic pulse jet cleaning standard. Horizontal Blenders, available in 115 basic sizes from ½ cu. ft. to 1500 cu. ft. Multi-Port® Gravity Blender for process variation and additive blending. Self-Aligning Pipe and Tube Flange Sets provide smooth continuous internal surface for liquid or dry material handling. Low pressure or high pressure models for either pipe of tubing.
Over
The Young Industries, Inc - 16 Painter Street - Muncy, PA 17756 800-546-3165 - [email protected] - www.younginds.com
60
Years of Service
